0
No products in the cart.
Solar panel mono PERC Jinko Solar 340 Wp (60 cut cells)
Monocrystalline solar module PERC Jinko Solar 340 Wp (60 split cells)
Jinko Solar 340Wp (60 split cells) photovoltaic panel with PERC (Passive Emiter Rear Contact) technology with 20.15% efficiency. Positive tolerance 0/+3% for grid connected or isolated solar installations up to 1500V voltage. 10-year product warranty and 25 years of production.
The Jinko Cheetah mono solar panels in their different power variants (up to 345Wp) are composed of 60 split solar cells (virtually 120 cells) with 5 bus bar technology distributed in a 6-column and 20 row grid. This series of Jinko has difference from the Eagle series of the PERC technology which gives it superior efficiencies.
€399.30
€179.69
Save 55%
21% IVA incluido
The main characteristic of the Cheetah series, in addition to the distribution of the 5 bus bars on the surface of the cells as already provided in the Eagle series, is the application of PERC (Passive Emiter Rear Contact) technology. This technology consists of a surface treatment of the back of the solar panel cell that is responsible for capturing the photons of the wavelength that passes through the cell and is not captured by it to make it revolve and introduce it back into the cell to generate additional current. For the 340Wp solar panel we highlight the incorporation of split cells which reduces recombination losses and increases the yield by around 1%. With all these technological innovations, the solar panel achieves an efficiency of more than 20%.
The main advantages of the Cheetah Mono Perc 340Wp series of split solar cells are
-
-
- Reduction of micro cracks in the panel due to the 5 bus bar of the cells that stop their growth
- Cut cell technology that decreases the recombination of electrons in the panel, reduces the size of hot spots and improves the performance of the solar panel in partial shade conditions.
- PERC technology that gives the panel an extra yield of approximately 2% compared to solar panels that do not have this technology.
- Solar panels with very low or no degradation due to PID potential difference.
- PID quality control in the production line for each solar panel
- Anti-reflective glass surface treatment that improves the performance of the solar panel with diffuse radiation. Glass with low iron content that better dissipates the incident heat
- Photovoltaic panel with mechanical wind load capacity of 2.4kPa and snow load capacity of 5.4kPA.
- Solar panel tested under high corrosion conditions (Seberity -B) and certified by TUV
- Negative voltage coefficient which reduces the losses of the solar panel when operating under high temperatures.
-
Without a doubt the Mono Cheetah Half Cut series from Jinko Solar is a high quality and high performance solar panel with a very economical price.
STC features (1000 W/m2; T cell of 25ºC):
|
Model |
JKM340M-60H |
|
Peak Power (Wp) |
340 |
|
Tolerance |
0/+3% |
|
Voltaje at maximum power Vmpp (V) |
33,93 V |
|
Maximum power current Ampp (A) |
10,02 A |
|
Open circuit Voltaje (Voc) |
41,0 V |
|
Shortcircuit current (Isc) |
10,82 A |
|
Panel efficiency (%) |
20,15% |
|
# of cells |
60 Monocriystalline 156 x 156 mm Half Cut |
|
Dimensions |
1684 x 1002 x 40 mm |
|
Weight |
18,5 kg |
|
Glass |
3,2 mm & anti-reflectant (AR) |
|
Frame |
Anodized Aluminum |
JKM340M-60H
Specific References
Monocrystalline solar module PERC Jinko Solar 340 Wp (60 split cells)
Jinko Solar 340Wp (60 split cells) photovoltaic panel with PERC (Passive Emiter Rear Contact) technology with 20.15% efficiency. Positive tolerance 0/+3% for grid connected or isolated solar installations up to 1500V voltage. 10-year product warranty and 25 years of production.
The Jinko Cheetah mono solar panels in their different power variants (up to 345Wp) are composed of 60 split solar cells (virtually 120 cells) with 5 bus bar technology distributed in a 6-column and 20 row grid. This series of Jinko has difference from the Eagle series of the PERC technology which gives it superior efficiencies.