• New
APSYSTEMS CABLE BUS AC Y3 | 1 meter | DS3 and...
APSYSTEMS CABLE BUS AC Y3 | 1 meter | DS3 and EZ1 series

APSYSTEMS CABLE BUS AC Y3 | 1 meter | DS3 and EZ1 series

ACC390
€17.18
Tax included

The AC Y3 bus cable from Apsystems is the essential component to guarantee a safe and efficient interconnection in facilities with microinversores. This single-phase 1 meter length cable and section of 2,5mm² It has been specifically designed to support the requirements of the DS3 and EZ1 series systems, allowing a robust connection between the equipment and the electrical network. On Tienda Solar We highlight its excellent construction quality with cable type H07RN-F 3G, which offers superior resistance to weathering and UV radiation. Thanks to its certification Ip67, guarantees total sealing in exterior environments, being a key part for any Solar Kit Looking for long-term reliability. Its design facilitates a quick and professional installation, minimizing losses due to drop in tension and ensuring that the energy of your photovoltaic plates Arrive at your home with maximum technical safety.

 

Professional connectivity: ACSYSTEMS CABLE AC Y3 of 1M

The BUS AC Y3 cable It is not just an electric driver, but an engineering solution designed by Apsystems to simplify the deployment of microinversores in residential and commercial covers. This cable allows you to create the "spine" of alternating current of the installation, where each microinversor is connected tightly and securely.

Durability and safety abroad

On Tienda Solar we know that the components of an installation of solar energy They must withstand extreme conditions. The cable Y3 has a rubber isolation H07rn-f, the highest standard for mobile and fixed outdoor applications, capable of resisting oils, moisture and variable temperatures. With a nominal tension up 0.6 / 1.0kv, this cable guarantees that the alternating current flow is stable under any operational circumstance.

Simplified installation for self-consumption kits

This 1 meter cable is the ideal measure for installations where the microinverters are placed adjacent under the photovoltaic plates. Its termination allows a clean connection with the proprietary APSystems connectors, eliminating the need for additional splicing boxes on the roof, which reduces the points of possible failure and improves the aesthetics of the installation.

Key Points of Cable Y3 of Apsystems:

  • Section 2.5mm²: Optimal dimensioning to minimize electrical resistance and maximize system efficiency.

  • IP67 protection: Totally sealed in front of dust and temporary immersion, ideal for its location under the panels.

  • Material H07RN-F 3G: Composed of high mechanical strength and flexibility, facilitating the laying by the structure.

  • Standard colors coding: Clara phase identification (brown), neutral (blue) and earth (yellow / green) for an installation without errors.

  • VDE and ROHS certification: Compliance guarantee with European Electrical Safety and Environmental Regulations.

  • Total compatibility: Designed to work in perfect harmony with the DS3 series and systems of Balcony Kits EZ1 series.

Summary technical sheet:

  • Length: 1 meter

  • Driver's Section: 2.5 mm².

  • Cable type: H07RN-F 3G 2.5mm².

  • Nominal voltage: 450 / 750V (max 0.6 / 1.0kv).

  • Grade of sealing: Ip67.

  • Identification of threads: Brown (L), blue (N), yellow / green (PE).

Frequently Asked Questions (FAQ)

  1. Can I use this cable with microinvestors from other brands? It is not recommended. This cable is specifically designed with electrical and insulation specifications Apsystems To guarantee compatibility with its connectors and the correct functioning of the DS3 and EZ1 series.
  2. Is it necessary to protect this cable with tube if it goes on the roof? Although the cable H07rn-f It is extremely resistant and suitable for outdoor, it is always a good practice to use fixing accessories to prevent the cable from directly touching the roof or cumulative moisture, prolonging the life of your Solar Kit.
  3. How many microinvestors can I connect on a single bus line? This will depend on the power of installed microinverters and local regulations. However, the section of 2.5mm² From this cable allows to handle raised currents with a minimum voltage drop.
  4. Is this cable come with the included AC connector? This model is the bus cable section for extension. Make sure you review if on your request Tienda Solar You also need the final connectors or termination plugs to guarantee the total seal of the AC bus.
  5. Can this cable be cut to adjust the measurement? Yes, the cable can be cut and peeled to make connections in derivation boxes if necessary, always respecting the color code to avoid damage to the Solar investors.