Unipilar Sun Cable H1Z2Z2-K 6mm² 1500V Red Roll...
Unipilar Sun Cable H1Z2Z2-K 6mm² 1500V Red Roll...
Unipilar Sun Cable H1Z2Z2-K 6mm² 1500V Red Roll 500 m
Unipilar Sun Cable H1Z2Z2-K 6mm² 1500V Red Roll 500 m

Unipilar Sun Cable H1Z2Z2-K 6mm² 1500V Red Roll 500 m

Tienda Solar
€681.50

(€1.65 /m)

Tax included

The 6 mm² unifilar solar cable 6 mm² in red It is usually used to identify the positive pole In the direct current wiring of photovoltaic installations, from the panel strings to the inverter, the regulator or protective boxes. Meets the norm In 50618 and is prepared for a 1500 V DC voltage, with a driver of Class 5 flexible tinned copper formed 84 yarns of 0.283 mm that guarantees a maximum resistance of solo 3.39/km. Its isolation and cover of Reticulated XLPE They resist continuous exposure to the weather, with essays against UV, ozone, acids, alkalis and impacts -40 ° C. It is Free of halogens and low emission of fumes, it admits 70 a air 60 ° C of room temperature, supports 250 ° C for 5 s short-circuit and offers a 24-year-old service life. With 6.4 mm of outer diameter, it is supplied in Roll of 500 m For installers.

The minimum purchase order quantity for the product is 10.

 

Detailed technical characteristics

Identification

  • Designation: H1Z2Z2-K 1 x 6 mm²
  • Standard: EN 50618: 2014
  • Color: red
  • Presentation: Roll of 500 m
  • Use: DC Wiring in photovoltaic installations
  • Marked: EC, H1Z2Z2-K, 1.0 kV AC / 1.5 KV DC, halogen-free and low smoke emission

Driver

  • Material: tinker
  • Class: 5 (flexible) according to IEC 60228
  • Training: 84 yarns of 0.283 mm
  • Diameter of the driver: 3,02 mm
  • Maximum resistance at 20 ° C: 3.39/km

Isolation and cover

  • Isolation: Xlpe, medium thickness 0.7 mm (minimum 0.53 mm)
  • Diameter on isolation: 4.60 mm
  • Cover: Xlpe, medium thickness 0.8 mm (minimum 0.58 mm)
  • Outside diameter: 6.4 mm
  • Minimum insulation resistance: 499 MΩ · km at 20 ° C and 0,499 MΩ · km at 90 ° C

Electrical tensions and tests

  • Nominal voltage: 1500 V DC / 1.0 KV AC
  • Test voltage: 6.5 KV AC for 5 min
  • DC trial of isolation: 1800 V for 240 h at 85 ° C in 3% NaCl, without drilling

Admissible intensity (60 ° C Environment, 120 ° C Max in driver)

  • An air cable: 70 a
  • A cable on surface: 67 a
  • Two cables in contact on surface: 57 a

Conditions of service and durability

  • Working temperature: -40 to +90 ° C
  • Maximum short circuit temperature: 250 ° C, 5 S
  • Minimum curvature radius: 6 times the diameter
  • Thermal resistance index: Ti 120
  • Lifetime: 25 years or more
  • Resistance tests: UV (EN 50289-4-17), ozone (in 50396), acids and alkalis (EN 60811-2-1), Impact at -40 ° C (EN 60811-1-4), Flame (IEC 60332-1-2)

Benefits of Solar Cable H1Z2Z2-K 6 mm² red

Clear polarity, installation without errors

An investment of polarity on the continuous side can damage the inverter or prevent installation from starting. Use Red cable for positive and black for the negative allows each driver to identify at a glance during assembly, in the connection to the inverters solar And in future revisions, especially when there are several strings in parallel.

Low strength for high current panels

The solar panels current large format exceed 13 A. With 3.39/km, the 6 mm² section maintains the voltage drop under long-run control, so that more energy arrives at inverter And the installation yields a better year after year.

Electrical safety with wide margin

Nominal tension 1500 V DC, the essay A 6.5 kV AC and the isolation test A 1800 V for 240 h In saline atmosphere they give a very broad security margin in residential, commercial and self-consumption systems with inverters hybrid.

Resistant in the toughest conditions

The Reticulated XLPE maintains its properties between -40 and +90 ° C, Resist the Sun, ozone and chemical agents and supports low temperature shock. Is the basis of your 24-year-old service life.

Halogen-free

In case of fire, it does not emit corrosive halogenous gases and produce little smoke, which improves the safety of people and protects nearby equipment.

Installation Tips

Dimensioning the section

The appropriate section depends on the current, the length of the stretch and the tension permissible. The 6 mm² is a habitual choice for long runs or raised currents; The installer must confirm it according to the applicable regulations.

Connections and terminals

Use connectors Mc4 compatible with 6 mm² and adequate crimper, and avoid mixing connectors from different manufacturers to ensure reliable and sealed contact.

Laying and fixing

Respects a minimum curvature radius of 6 times the diameter (a few 38 mm as an indicative calculation) and fix the cable to the Structures for Solar Panels With UV resistant flanges, without leaving stretching or in contact with edges.

Find the rest of the material for your installation, from Solar kits to protections and connectors, in Tienda Solar, and consult in the Blog Tienda Solar Our technical guides developed by experts.

Frequently Asked Questions (FAQ)

1. Is the red cable always used for the positive?

It is the most common convention in photovoltaic installations: Red for the positive and black for the negative. Follow it systematically facilitates assembly and maintenance and reduces the risk of polarity errors.

2. Do you have any technical difference with the black cable?

No. Both colors share the same construction and characteristics: H1Z2Z2-K 1 x 6 mm², 1500 V DC, Class 5 tinned copper conductor and XLPE isolation. Just change the color of the cover.

3. How many meters does the roll include?

The product is supplied in Roll of 500 m, A format designed for installers and projects with several Strings or facilities.

4. What standard does it comply with?

It is manufactured according to the EN 50618: 2014, the specific European standard for cables of photovoltaic systems, with class 5 conductor according to IEC 60228 and behavior in front of the flame according to IEC 60332-1-2.

5. Is it used to connect batteries?

This cable is designed for the Fotovoltaic wiring in continuous current. The connections between battery E inverter They usually require larger sections by loading and unloading currents; Check the battery documentation and the inverter.

6. Can it be used abroad without protection?

Yes, it is designed for the weather, with resistance to UV, ozone and chemical agents. Even so, it is convenient to fix it correctly and protect it under tube in the sections exposed to mechanical damage.

Customers who bought this product also bought: