The Voltronic parallel kit for Axpert King 5K (reference 31-010245-00g) is the accessory that allows you to connect several inverters Isolated Axpert King of 5000VA / 5000W to work Parallel on a common CA output, adding its power. Is formed by a communication card and the communication wiring necessary to synchronize the equipment, and it is the form of expand the capacity of an existing off-grid installation without replacing the inverter already installed. The system admits Up to 9 units in parallel, which raises the theoretical power available up to 45 kVA. Needed A kit for each inverter that is incorporated into the parallel, and all units must be same model and share a battery bank of 48v. With a weight of solo 0.28 kg, it is installed in the inverter Following the manufacturer's parallel assembly guide.
Detailed technical characteristics
Accessory data
- Product: Parallel Kit for Axpert King 5k
- Reference: 31-010245-00g
- Ean: 8435438801400
- Content: communication card and communication wiring for the parallel connection
- Weight: 0.28 kg
Compatibility
- Series: Axpert King
- Model: Axpert King 5K (5000VA / 5000W, battery 48 VDC)
- Maximum number of units in parallel: 9
- Kits needed: 1 for each inverter that is added to the system in parallel
Data inverter Compatible (Axpert King 5K)
- Nominal power: 5000VA / 5000W
- Battery voltage: 48 VDC
- Input voltage AC: 230 VAC (range 110-280 VAC)
- Frequency: 50/60 Hz (Automatic detection)
- Exit tension regulation: 230 VAC ± 5%
- Waveform: Pure sinusoidal wave
- Transfer time: 0 ms
- POWER OF PICO: 10000VA for 5 s
- Solar charger: Mppt
Benefits of parallel kit for Axpert King 5K
An isolated installation rarely remains equal over the years: Appliances, a more powerful pump, a workshop or a second home. With this parallel kit, grow does not involve disassembling the inverter existing Add a second King 5K Axpert (or up to a total of 9) and connect them to work as a single system.
This brings three clear advantages. The first is the phase scalability, which allows you to distribute the investment over time. The second is the redundancy: In a multi-equipment system, the power is distributed among several units instead of relying on a single inverter. The third is the System coherence, since all teams share the same AC output and the same bank of lithium batteries lead 48v.
In addition, each inverter Added incorporates its own MPPT regulator, so when expanding the system also increases the ability to connect more solar panels and load the battery bank more quickly.
How to plan a parallel system
Orientation power according to number of equipment
- 2 units: until 10 kVA theoretical
- 3 units: until 15 kVa theoretical
- 9 Units: until 45 kVA theoretical
Basic installation requirements
- Make the assembly with the Fully disconnected system.
- Follow Manufacturer parallel installation guide For the Axpert King series.
- Use inverters pattern, all with batteries 48 VDC.
- Verify firmware and communication settings of each unit before start-up.
Where it makes sense to expand in parallel
It is the usual solution when an isolated housing remains short of power, when an agricultural exploitation incorporates new machinery or when a technical center needs more capacity without renouncing the Transfer 0 ms of Axpert King. If you are assessing the enlargement, in Tienda Solar We help you review the compatibility of your teams, and in the Blog Tienda Solar You will find purchase guides and technical items prepared by experts on isolated systems and inverters solar.
Frequently Asked Questions (FAQ)
1. How many kits do I need to connect several inverters in parallel?
Needed A kit for each inverter That is incorporated into the system in parallel. Check the manufacturer's installation guide to confirm the exact configuration according to the number of computers.
2. How many Axpert King 5K can I connect in parallel?
Until 9 units of the model of 5 kVA, what is a theoretical power of up 45 kVA.
3. Can I mix different models in the parallel?
No. All units must be same model and work with a battery bank 48 VDC.
4. What does the kit include?
A communication card and the communication wiring For the parallel connection. The AC power wiring and DC of the installation is not part of the kit.
5. What batteries can be used in a parallel system?
A common bank of 48v, either AGM batteries, Gel batteries or lithium with BMS, dimensioned for the total power of the set of inverters.
6. Is it compatible with the Axpert King Rack version?
This kit is referenced for the Axpert King 5K. If you have the Rack version, contact us before purchase to confirm the appropriate parallel accessory.