The Axpert King 3K is a inverter 3 kVA / 3000W solar charger for 24 V batteries whose differential feature is your Transfer time of 0 ms: When the network fails, the feeding of the loads is not interrupted, which makes it suitable for sensitive equipment such as Computers, Servers, Routers, Alarm Systems or Domestic Medical Equipment. Integrates inverter of pure sine wave, 60 A Solar MPPT Regulator up 1500 WP of panels and AC charger 60 a, with a maximum current of combined load of A.m.. Your LCD module is removable and can be installed at a distance from the equipment, incorporate Bluetooth for monitoring with Android app, function USB on-the-go and port reserved for BMS by RS485, Can-Bus or RS232.
Detailed technical characteristics
General data
- Model: Axpert King 3K (Reference 96-326008-00g)
- Nominal power: 3000 VA / 3000 W
- Parallel operation: Up to 9 units
- Battery voltage: 24 V DC
AC
- Nominal voltage: 230 V AC
- Voltage range: 110-280 V AC
- Frequency: 50/60 Hz (Automatic detection)
AC
- Voltage regulation: 230 V AC ± 5%
- Harmonic distortion (THDV): 3 % o less with linear load; 8 % o less with non-linear load
- POWER OF PICO: 6000 goes for 5 s
- Maximum efficiency: 93% In Red mode / 90% in battery mode
- Transfer time: 0 ms
- Waveform: pure-stenoidal
Drums
- Flotation voltage: 27 V DC
- Overload protection: 34 V DC
Solar charger and BC charger
- Type of regulator: Mppt
- Maximum FV power: 1500 W
- MPPT range: 30 to 115 V DC
- Maximum tension in open circuit (VOC): 145 V DC
- Maximum current of solar load: 60 a
- Maximum current current AC: 60 a
- Maximum total load current: A.m.
Communication
- Interfaces: USB, RS232, RS485, Bluetooth, dry contact
- Monitoring: Bluetooth with app for Android
- USB on-the-go: Yes
- BBS port: RS485, Can-bus or RS232
- Screen: Removable LCD module with multiple communications
Physical and environmental data
- Dimensions (PR X AL): 140 x 303 x 525 mm
- Net weight: 13 kg
- Operating temperature: 0 to 55 ° C
- Storage temperature: -15 at 60 ° C
- Humidity: 5 to 95% non-condensation
Benefits of the Axpert King 3K
0 ms: Uncuts for critical equipment
Most of inverters Loaders take between 10 and 20 ms in going from network to battery. With 0 MS Transfer, Axpert King maintains feeding without interruption, so computers, servers, payment terminals or power plants are not restarted when a cut occurs. Works, in practice, as a SAI solar.
Combined load of up to 120 A
The solar regulator 60 a and the AC charger of 60 a they can work at the same time, with a total current of A.m.. This allows recharging the bank of lithium batteries Or lead of 24 V in a short time when Sun and Network or Generator is combined.
Removable screen and Bluetooth monitoring
The Removable LCD module can be placed in a visible place, away from the technical room, and the Bluetooth Allows you to consult the status of the system from the mobile.
Communication with battery
Port BMS (RS485, CAN-BUS or RS232) allows compatible lithium batteries to communicate their load limits to the inverter, Protecting the cells.
Expandable up to 9 teams
With Up to 9 units in parallel, the system can grow if consumption increase, without replacing the initial equipment.
When to choose the Axpert King 3K
Typical applications
Small isolated homes, booths, offices, businesses or facilities that need backup For electronic equipment, with a battery bank of 24 V.
Solar field at low voltage
The MPPT controller works between 30 and 115 V with a maximum of 145 V in open circuit and 1500 WP. Normally this supposes short chains of 2 or 3 solar panels in series, depending on the tension of the panels and the minimum temperature of the place.
What to keep in mind
Is a inverter For isolated and backup systems, without a network injection. If you need more power or battery of 48 V, compare with others inverters solar and inverters hybrid. Find Structures for Solar Panels and Solar kits on Tienda Solar, and consult in the Blog Tienda Solar How to dimension an isolated system.
Frequently Asked Questions (FAQ)
1. What does it mean to have 0 more of transfer time?
That, when the network fails, the loads pass to feed on the battery without interruption. It is what allows you to use it for critical equipment that does not tolerate microcortes.
2. How many panels can I connect?
Until 1500 WP, with an MPPT range of 30 to 115 V and 145 V Maximum in open circuit. They are usually short chains of 2 or 3 panels in series, according to their tension.
3. What batteries do you admit?
Batteries 24 V. It has a port BMS by RS485, CAN-BUS or RS232 for compatible lithium batteries; It is convenient to confirm compatibility before installing.
4. Can it be parallel?
Yes, until 9 units in parallel.
5. How is it monitored?
Through Bluetooth with app for Android, from the Removable LCD or through the USB ports, RS232 and RS485.
6. What peak power do you admit?
6000 goes for 5 seconds, enough for the start of refrigerators or small pumps within its nominal power of 3000 W.
- Power (kW)
- 3 - 5.9
- Phase Type
- Single phase
- Max Current Input (A)
- 10-10.99
- MPPT
- 1