Inverter Off-Grid Charger Voltronic 11KW 48V Axpert Max II Twin 11k
The Voltonic Axpert Max II Twin 11k is a inverter Isolated charger of 11000VA / 11000W for batteries 48v, with exit Pure sinusoidal wave at 230VAC ± 5%, POWER OF PICO DE 22000VA and 93% efficiency. Incorporates Two MPPT regulators permitted 11000W photovoltaic field (5500W per entry), with a wide range of 90 to 450 VDC, 500 VDC maximum tension in open circuit and one 27A FV input current by MPPT (40A maximum in total). The Cargo current reaches 150A, both from the panels and from the network or the generator. Allows Parallel performance of up to 6 units, it has Two outings for intelligent management of loads and one Auxiliary output of 12VDC and 100W. Integrates WiFi with app for Android and iOS, 5 "LCD screen, State indication with RGB lights, Puerto for BMS and antipolvo kit.
Detailed technical characteristics
Power and output
- Model: Axpert Max II Twin 11k
- Nominal power: 11000VA / 11000W
- Parallel operation: Yes, up to 6 units
- POWER OF PICO (SURGE): 22000va
- Tension regulation AC (Battery mode): 230VAC ± 5%
- Waveform: Pure sinusoidal wave
- Efficiency (peak): 93%
- Transfer time: 10 ms (personal computers) / 20 ms (electronics)
- Outputs CA: 2 (Intelligent Management of Loads)
- Auxiliary CC output: 12 VDC ± 5%, 100W
Entrance
- Input voltage: 230 VAC
- Selectable voltage range: 170-280 VAC (personal computers) / 90-280 VAC (electronics)
- Frequency range: 50 Hz / 60 Hz (Automatic detection)
Drums
- Battery voltage: 48 VDC
- Load voltage in flotation: 54 VDC
- Protection against overload: 63 VDC
Solar charger and charger AC
- Type of regulator: Mppt (2 entries)
- Maximum power of the FV field: 11000w (5500W x 2)
- MPPT range at operating voltage: 90 - 450 VDC
- Maximum tension in open circuit (VOC): 500 VDC
- Maximum entry current FV: 27A x 2 (40th)
- Maximum current of solar load: 150 a
- Maximum load current CA: 150 a
- Maximum load current: 150 a
Physical data, Communication and Environment
- Dimensions (F x an x al): 158.4 x 503.6 x 530.8 mm
- Net weight: 20 kg
- Communication interface: USB / RS232 / RS485 / WIFI / dry contact
- Screen: LCD 5 "
- Humidity: 5% to 95% of relative humidity (without condensation)
- Operating temperature: -10 ° C to 50 ° C
- Storage temperature: -15 ° C at 60 ° C
- Security certification: EC
Benefits of the Voltronic Axpert Max II Twin 11k
The Max II Twin 11k is the power steps of the Axpert family for those who need Electrify completely a large house, a farm or a small productive installation without red. With 11kw continuous and 22000VA, You can simultaneously feed induction cuisine, pumps, air conditioning, tools and the rest of domestic consumption without starting the system.
Its main difference in front of the inverters isolated of lower rank is the MPPT: Two independent entrances up 5500w each allow you to distribute the solar panels on Two different orientations, For example, east and west, or two covers with different inclinations, without the performance of one penalty to the other. The range of 90 to 450 VDC It also facilitates the design of Strings with high power modules.
On the storage side, the 150th equivalent, at the voltage of floating 54 VDC, at a load power of some 8.1 kw, a figure that allows recovering large banks of lithium batteries In a few hours of sun. If solar production is not enough, the 150A CA Charger Work from the network or a generator set.
Intelligent Management of Loads
Two outings
The two outputs They allow to separate essential consumption of secondary consumption. Combined with the Timer of use and configurable prioritization of the CA / FV output, You can decide what loads you receive energy and when, protecting the autonomy of the battery.
Integrated 12VDC output
The Auxiliary output of 12VDC and 100W feeds directly small consumption in continuous, as CC fans, LED bulbs or router, without going through the conversion to alternates.
Parallel scalability
With up to 6 units in parallel, the theoretical capacity of the system reaches the 66 kVA, which makes Max II Twin on a solid base for agricultural holdings, rural accommodations or ships without electric domination.
Monitoring, maintenance and robustness
The Integrated wifi allows to follow the installation from the App for Android and iOS, the 5 "LCD screen and the RGB lights They show the status of the team at a glance, and the function USB on-the-go Facilitates data management. The Replaceable fan simplifies maintenance, the Integrated dust kit protects electronics in rural environments and their Independent battery design It allows you to continue feeding loads from the panels or the network without a battery connected.
To mount the photovoltaic field, review our Structures for Solar Panels. On Tienda Solar We help you configure the two MPPT inputs and dimension the battery bank, and in the Blog Tienda Solar You will find purchase guides and technical items prepared by experts for high-power isolated projects.
Frequently Asked Questions (FAQ)
1. What is the maximum entry current FV of Max II Twin 11k?
Each MPPT admits 27a, with a maximum of 40a Adding both entries. This value is key to choosing high-power modules and deciding how many strings are connected in parallel at each input.
2. Can I connect panels with different orientations?
Yes. When having Two independent MPPT up 5500w Each one can connect fields with different orientation or tilt without affecting the performance of the other.
3. How many units can be connected in parallel?
Until 6 units, which allows us to expand the power of the installation progressively.
4. What batteries are compatible?
Work with banks 48v. Has Communication port Pre-ordered for BMS (RS485, Can-bus or RS232) for managed batteries, and can also be used with lead banks such as AGM batteries or Gel batteries. It is convenient to confirm the compatibility of the protocol with the chosen battery.
5. What is the exit of 12Vdc for?
It is an auxiliary outlet of 12VDC ± 5% and 100W Designed to directly feed small consumption, such as fans, LED lighting or router.
6. Is it a hybrid inverter with injection to network?
Although it is commercially called hybrid because it combines panels, network and battery, it is a inverter Isolated (off-grid) That does not pour surpluses. For self-consumption connected to network with batteries, consult our inverters hybrid.
- Power (kW)
- 10 - 14.9
- Phase Type
- Single phase
- Max Current Input (A)
- 15 - 15.99
- Compatibility list
- Pylontech Force L2
Pylontech US2000C / US3000C / US5000
Pylontech US3000C
Pylontech US5000 / Force L2
Turbo Energy (Slim)