Your cart
There are no more items in your cart
BMS for Sunwoda Lithium Battery Suiss (Control Unit)
€699.00
Tax included
The BMS (Battery Management System) for the Sunwoda Lithium Battery Sunss It is the intelligent control component indispensable for the operation of any SUESS storage tower. This master unit is placed at the top of the system and is responsible for managing communication between the battery modules and the inverter solar. Thanks to its advanced technology, the BMS monitors critical parameters in real time such as the voltage, the current and temperature of each lithium cell, guaranteeing a safe operation and prolonging the useful life of the system up to the 6,000 cycles. With its design "Stack and play", it is physically coupled to 5.12kWh modules without the need for complicated interconnection cables. Includes communication interfaces CAN and RS485, in addition to connectivity WiFi Integrated for remote monitoring through the official Sunwoda app, allowing firmware and diagnostic updates at a distance.
BMS Sunwoda Suuss: The brain of your self-consumption
The BMS control unit is the operating heart of the SUESS lithium battery. Without this component, the storage modules can not interact with the inverter Neither manage loads safely. It is in charge of converting a set of lithium cells into an intelligent and reliable energy system.
Advantages of the Sunwoda BMS control unit
-
Intelligent Management of Cells: The BMS constantly balances the load between the different modules of the lithium battery, ensuring that everyone works uniformly and avoiding premature aging of the cells.
-
Industrial grade security: It incorporates protections of hardware and software against overvoltages, deep discharges, short circuits and overheating. In case of detecting any anomaly, the BMS disconnects the system automatically to protect the house.
-
Wi-Fi connectivity Integrated: Allows you to connect the Lithium battery to the Internet to monitor the load status (SOC) and the consumption history from your smartphone, in addition to allowing remote preventive maintenance by the technical service.
-
Wireless design (Wireless Connection): Its quick connection architecture allows the BMS to communicate with the lower modules simply when stacking, eliminating the disorder of cables and minimizing the fault points.
-
Multi-inverter compatibility: The BMS firmware is designed to be compatible with the communication protocols of the main manufacturers of hybrid investors (Solis, Deye, Victron, Goodwe, etc.).
Technical characteristics (BMS unit)
-
Function: Charging / unloading and communications management.
-
System compatibility: 5.12KWH Torres Suisss A 20.48kWh.
-
Communication interfaces: CAN 2.0 / RS485 / Wi-Fi.
-
Nominal operating current: Up to 100A / 200A (depending on system configuration).
-
Protection: IP54 (suitable for indoor and exteriors under cover).
-
Display / indicators: State LED (SOC, Alarms, Operation).
-
DC disconnection: 250A integrated circuit breaker.
Frequently Asked Questions (FAQ)
- Can I install the lithium battery modules without this BMS? No. The BMS is mandatory for each battery tower. Is the device that "translates" the energy of the cells so that the inverter I can understand and use it.
- How many modules can a single BMS control? A single BMS SuESS can manage from 1 to 4 lithium battery modules (a maximum of 20.48kwh per tower). For higher capabilities (up to 60kWh), several towers are installed, each with its own BMS, connected in parallel.
- What does this control unit include? Generally includes the control electronics, the DC protection switch, the Wi-Fi antenna for monitoring and the connection terminals for the inverter and the grounding.
- How do I know if the BMS is working properly? The front of the BMS has LED indicators showing the load level and system status. Also, before any errors, you will receive a real-time notification through the Sunwoda app on your mobile.
- On sale!
Tap to zoom
