Control and base unit BYD BCO + for Battery-Box...
Control and base unit BYD BCO + for Battery-Box HVS + / HVM + 16541149-00

Control and base unit BYD BCO + for Battery-Box HVS + / HVM + 16541149-00

B-BOX-HVM-BMS
€546.76
Tax included

The Control unit BYD BCU + Based (ref. 16541149-00) is the component that starts and governs each tower of lithium battery BYD Battery-Box HVS + and HVM +. Integrate Battery control unit (BCU), who supervises the modules Lifepo4, and the soil base on which they are stacked by Patented internal plug-in connection, without wiring between modules. Manage the CAN / RS485 communication with the inverter, the Automatic setting of the SOC, the remote diagnosis and the OTA Updates, and allows you to expand the tower at any time and with any state of charge thanks to Integrated Rolling Optimizer. In the HVS range + controls 2 to 5 modules of 2.56 kWh, that is, 5.12 to 12.8 kWh by tower, with 12.8 kW of loading and unloading and a maximum of 38.4 kwh With three towers. Offers protection Ip55, installation indoor and 10 years warranty.

 

Detailed technical characteristics

Data of the BCU + unit with base

  • Manufacturer's reference: 16541149-00
  • Composition: Battery control unit (BCU +) and floor base for Battery-Box tower
  • Compatibility: BYD Battery-Box HVS + and BYD Battery-Box HVM +
  • Not compatible with: previous generation Battery-Box Premium HVS / HVM
  • Dimensions (at x an x PR:) 267 x 610 x 282 mm (value calculated from the tower dimensions published by BYD)
  • Weight: 14.1 kg approx. (calculated value from the tower weights published by BYD)
  • Communication with the inverter: CAN / RS485
  • Management functions: automatic setting of the SOC, , remote diagnosis and oTA Update
  • Rocking: integrated rolling optimizer, possible extension with any SOC
  • Degree of system protection: IP55
  • Installation: indoor / outdoor, assembly standing on floor
  • Operating temperature: -10 ° C to +50 ° C (with power reduction between -10 ° C and +5 ° C)
  • Storage moisture: 5% to 95%
  • Maximum altitude: less than 3,000 m
  • System certifications: VDE2510-50 / IEC62619 / EC / UKCA / UN38.3
  • Applications: networking, , network connection with backup (backup) and isolated (off-grid)
  • Warranty: 10 years (subject to the conditions of the limited warranty charter of BYD)

Tower configurations BYD Battery-Box HVS + with a BCU +

ModelHVS + modulesUseful energyNominal voltageTension rangeDimensions (x an x PR)Weight
HVS + 5.125,12 kWh204.8 V160 - 230.4 V747 x 610 x 282 mm91.1 kg
HVS + 7.737,68 kWh307.2 V240 - 345.6 V987 x 610 x 282 mm129.6 kg
HVS + 10.2410.24 kWh409.6 V320 - 460.8 V1227 x 610 x 282 mm168.1 kg
HVS + 12.8512.8 kwh512 V400 - 576 V1467 x 610 x 282 mm206.6 kg
  • HVS + module: 2,56 kWh, , 102.4 V, , 38.5 kg
  • Chemistry of cell: lithium Ferrophosphate (LifePO4)
  • Maximum output current: 25 A
  • Peak current: 55 A for 15 S
  • Maximum loading / tower discharge: 12.8 kW
  • Full cycle efficiency (round-trip:) ≥ 95%
  • Maximum system capacity: 38.4 kwh (3 towers HVS + 12.8)


Benefits of the Control and Base unit BYD BCU + for Battery-Box HVS + / HVM +

The BCU + it is the brain of the Battery-Box tower. Without it, the modules of lithium battery of BYD they can not communicate with the inverter neither operate safely, because it is the unit that measures, protects and coordinates the whole whole. That is why it is the piece that is acquired when mounting a new tower, when adding a tower in parallel or when replacing a damaged unit.

In front of other modular storage solutions, the approach of BYD it stands out in three measurable aspects:

  • Extension without load status restrictions. The integrated rolling optimizer allows you to incorporate new modules together with others who have already been in service and with any SOC, without having to download or match the tower before. It is a real advantage against systems that force them to expand only within a short window after installation.
  • Remote maintenance. The remote diagnosis and the oTA Updates they reduce displacements of the installer and maintain the firmware a day throughout the system life.
  • Safety of chemistry LifePo4. BYD manufactures cells lithium ferrophosphate since 2002 and accumulates more than 1 million systems installed in more than 100 countries, with a security design that covers from the cell to the pack. The set is low certified VDE2510-50 and IEC62619.

In addition, the tower works with a complete cycle efficiency equal to or greater than 95% and it offers 10 years warranty, figures that place it in the head group of residential high voltage batteries. When compatible with the main ones inverters hybrid single-phase and three-phase of the market, it fits in both new installations and systems extensions with solar panels already in operation.

What function does the BCU + comply with a Battery-Box tower?

Each tower BYD it consists of three stacked elements: the floor base, the control unit BCU + and between 2 and 5 HVS + modules (or the corresponding HVM + modules). The BCU + concentrates:

  • The cAN / RS485 COMMUNICATION with the inverter, which is what indicates how much power you can upload or download at each moment.
  • The automatic setting of the SOC, which calibrates the state of charge so that the inverter work with reliable data.
  • The automatic configuration detection (smart configuration), which identifies how many modules the tower has.
  • The system protections and the management of rolling between modules.

The base, on the other hand, holds the tower on the ground and is part of the system of patented internal plug-in connection, which eliminates the wiring between modules and accelerates the assembly.

BCU + for HVS + or for HVM +: How to choose the right tower

The same BCU + with base serves for the two new generation ranges, so the decision depends on the modules and the inverter:

  • Battery-Box HVS +: modules 2,56 kWh and 102.4 V. A tower reaches 512 V Nominal with 5 modules, which reduces the current to 25 A and it makes it ideal for inverters with high voltage battery range.
  • Battery-Box HVM +: it uses modules of lower voltage and greater unitary capacity, so the tower works with lower tensions and higher currents. Is the option for inverters whose battery range does not reach the voltages of the HVS +.

Before choosing, check that the inverter figure in the compatibility list of BYD for the range and number of envisaged modules. If you are looking for other storage options, in our category lithium batteries you will find high and low voltage alternatives.

Installation and extension of the system

The assembly is simple and fast: the base is placed, the BCO + is coupled and the modules are stacked on it, without screws or cables between blocks thanks to the internal connection. The tower admits installation indoor with protection IP55, always within the range of -10 ° C to +50 ° C and below 3,000 m altitude.

To overcome the capacity of a single tower, they can be connected until 3 towers HVS + 12.8 and reach 38.4 kwh. Each tower needs your own bCU + unit with base, so this reference is essential both in the first assembly and in each expansion in parallel. If you are dimensioning a complete system from scratch, our kits sº

olares gather panels, inverter and battery in a single purchase.

Why buy your BCU + in Tienda Solar

On Tienda Solar we work daily with professional and particular self-consumption installers, and we help you to verify the compatibility between your inverter, the number of modules and the BCU version before placing the order. If you want to deepen the dimensioning of batteries, the choice between high and low voltage or the maintenance of LIFEPO4 systems, in the Blog Tienda Solar you will find purchase guides, tips and technical content prepared by experts in the sector.


Frequently Asked Questions (FAQ)

1. The BCO + is compatible with my batteries BYD Battery-Box Premium HVS or ancient HVM?

No. The BCU + Based (16541149-00) it is designed exclusively for the new generation HVS + and HVM +. The Premium HVS / HVM Towers of Previous Generation use your own BCU and can not be combined with modules or control units "+."

2. Do I need a BCU + for each battery tower?

Yes. Each Battery-Box tower is mounted on its own base and with his own control unit BCU +. If you install 3 towers HVS + 12.8 to get to 38.4 kwh, you will need 3 units BCU + based.

3. Can I expand the battery later if it has been working on time?

Yes. Thanks to integrated rolling optimizer, , BYD allows you to add modules at any time and with any state of charge (SOC), without needing to previously equalize the existing tower. You just have to respect the maximum of 5 hVS + modules per tower.

4. With what inverters works the BCU +?

The tower communicates by CAN / RS485 and it is compatible with the main ones inverters single-phase and three-phase of the market, both in systems network connected, , back like isolated. We recommend you review the compatibility list of BYD or consult our range of Inverters solar to choose an approved team.

5. Can the Battery-Box HVS + tower be installed on the outside?

Yes. The system has protection IP55 and is approved for installation indoor, with a rank of operation -10 ° C to +50 ° C. Keep in mind that between -10 ° C and +5 ° C a power reduction occurs, so it is convenient to protect it from direct sun exposure and extreme temperatures.

6. What guarantee does the BCU + have?


The Battery-Box HVS + system has 10 years warranty, subject to the conditions of the limited warranty charter of BYD. If you need help with a guarantee procedure, the equipment Tienda Solar it accompanies you in the process.

Battery Voltage (V)
+ 48
Battery Energy (kWh)
2 - 3

Customers who bought this product also bought: