WALL BOX Pulsar WALL BOX 7m Cable Tipo 2 White
Electric car charger Wallbox 22kw Three-phase...
WALL BOX Pulsar WALL BOX 7m Cable Tipo 2 White
Electric car charger Wallbox 22kw Three-phase Press Max with cable 7m white

Electric car charger Wallbox 22kw Three-phase Press Max with cable 7m white

(PLP2-M-2-4-9-001 | 41-114050)[B]
€901.89
Tax included

The charger Wallbox Press Max of 22kw is a recharge point in Mode 3 (IEC 61851-1) to 400V three-phase installations, with a Nominal current of 32a per phase and 7 meter integrated cable with type 2 connector. The load current is Configurable from 6A to the nominal, which allows adapting it to the power available in each home, garage or business. Includes Static loading of load (Static Load Management) and admits, with a external meter, Dynamic power management, solar load and MID. It is controlled by WiFi and Bluetooth from the App and the portal of Wallbox, he shows his status with a RGB LED Ring Halo and it is compatible with Ocpp For its integration on management platforms. Offers protection IP55 / IK10, 6MA DC residual current detection and it works between -30 ° C and 50 ° C, in a compact body 198 x 201 x 99 mm and 1.3 kg without cable.

 

Detailed technical characteristics

General Specifications

  • Model: Wallbox Press Max
  • Version: With integrated cable (tethered)
  • Color: White
  • Cable length: 7 m
  • Charging mode (IEC 61851-1): 3
  • Dimensions: 198 x 201 x 99 mm (without cable)
  • Weight: 1.3 kg (without cable)
  • Operating temperature: -30 ° C to 50 ° C (full power up 40 ° C; Above power reduction can be applied)
  • Storage temperature: -40 ° C to 70 ° C

Electrical specifications

  • Charging power: 22kw
  • Nominal voltage CA: 400V ± 10%
  • Nominal current: 32A (three-phase)
  • Configurable current: 6A to the nominal current
  • Connector type (IEC 62196-2): Type 2
  • Section of the input cable: up to 13 mm²
  • Nominal frequency: 50Hz / 60Hz
  • Degree of protection: IP55 / IK10
  • Overvoltage category: CAT III
  • Residual current detection: DC 6MA
  • Differential (RCCB): External Mandatory (according to local regulations)
  • Additional protections: Optional external shunt (Disconnection by contact welding)

User interface and communications

  • Connectivity: WiFi, Bluetooth
  • User identification: App and Portal Wallbox
  • User interface: App and Portal Wallbox
  • Status information: LED RGB Halo, App and Portal Wallbox
  • Energy management included: Static loading
  • Optional energy management: Dynamic loading, solar load, external MID counter (Requires external meter)
  • External Communication: Ocpp, API and SDK for Partners

Regulations

  • Standards: IEC 61851-1, IEC 62196-2
  • Policies: Red 2014/53 / EU, ROHS 2011/65, UK SMART CHARGING REGULATIONS

Benefits Wallbox Press MAX 22KW

The Wallbox Press Max, in his version of 22kw, it is designed for those who have supply three-phase And they want the maximum power margin in alternating current. With 32A per phase at 400V, you can deliver the highest AC charging power that supports Type 2 standard, so that the limiting factor becomes the On-board charger of the vehicle, Not the recharge point. This makes it an investment prepared for future car changes.

Your Configurable current from 6A allows you to install it today although the contracted power is limited, and Static loading Including avoids passing the set limit. If a external meter, the charger can Adjust the power in real time depending on the consumption of the housing and activate the Solar charging mode, which prioritizes the energy of the solar panels To load the car with surplus instead of network energy.

The 7-meter cable It provides flexibility in wide garages, seats with the car parked in different positions or vehicles with the loading in the back, without the need for extensionrs.

Safety and Robustness for any location

IP55 / IK10 protection

The envelope with Ip55 Resists powder and water jets, and classification Ik10 ensures maximum resistance to impacts, so it can be installed both in garage and outdoors.

Continuous leak detection

The 6MA DC residual current detection integrated allows you to combine it with a Differential Type A, more usual and economical than one type B. The manufacturer indicates that the external type A differential is mandatory according to local regulations.

Operation with extreme temperatures

Opera -30 ° C to 50 ° C, keeping the Full power up to 40 ° C.

Smart load with solar energy

Combining a charger as pressing Max with a self-consumption installation is one of the most effective ways to reduce cost per kilometer. With the external meter Optional and a system based on inverters hybrid and lithium batteries, the surplus of noon can be used to the car instead of being poured into the network. If you still do not have panels, our Solar kits They are a good starting point.

On Tienda Solar We help you integrate the recharge of the vehicle into your photovoltaic installation, and in the Single store bloga You will find purchase, comparative and technical articles prepared by experts on electric mobility and self-consumption.

Frequently Asked Questions (FAQ)

1. Do I need three-phase installation for Press Max 22KW?

Yes. To reach the 22kw Supply is required three-phase at 400V with 32A by phase. The current is configurable from 6a, so you can adjust to the available power.

2. Does my car will charge 22KW?

Depends on On-board charger of the vehicle. Pulsar Max delivery up 22kw, but each car limits the AC power accepting; If you admit less, the charger automatically adapts to that limit.

3. Can I charge the car with my solar boards?

Yes, with the optional function of solar load, which requires installing a external meter. So the charger prioritizes surpluses of your installation solar panels.

4. What differential protection needs?

Integrates 6MA DC residual current detection, so you need a External differential type A, according to the applicable local regulations.

5. Can it be installed abroad?

Yes. It has protection Ip55 in front of dust and water e Ik10 in front of impacts, and it works between -30 ° C and 50 ° C.

6. Can it be integrated into a fleet management system or a community?

Yes. It is compatible with the Protocol Ocpp and has API and SDK For partners, which facilitates its integration into recharge management platforms.