Electric car charger Wallbox 7,4kw Single-phase...
Electric car charger Wallbox 7,4kw Single-phase...
Electric car charger Wallbox 7,4kw Single-phase Press MAX with cable 5m white
Electric car charger Wallbox 7,4kw Single-phase Press MAX with cable 5m white

Electric car charger Wallbox 7,4kw Single-phase Press MAX with cable 5m white

(CMX2-0-2-4-8-002)
€755.05
Tax included

The Wallbox Press Max of 7.4kw is an electric vehicle charger in 3 designed to Housing supply single-phase of 230V, with a Nominal current of 32a and Integrated 5 meter cable with type 2 connector. Your Freight current is adjustable 6A to 32A, so that it can be adapted to the hired power From the home without the need to expand it. Incorporate series Static loading and, adding a external meter, allows Dynamic power management, Load with solar surpluses and MID. It is configured by WiFi and Bluetooth from the App and the portal of Wallbox, indicates its status through a RGB LED Ring Halo and it is compatible with Ocpp. With protection IP55 / IK10, 6MA DC residual current detection, Range of operation -30 ° C to 50 ° C and a single size 198 x 201 x 99 mm and 1.3 kg Without cable, it fits in any garage or facade.

 

Detailed technical characteristics

General Specifications

  • Model: Wallbox Press Max
  • Version: With integrated cable (tethered)
  • Color: White
  • Cable length: 5 m
  • Charging mode (IEC 61851-1): 3
  • Dimensions: 198 x 201 x 99 mm (without cable)
  • Weight: 1.3 kg (without cable)
  • Operating temperature: -30 ° C to 50 ° C (full power up 40 ° C; Above power reduction can be applied)
  • Storage temperature: -40 ° C to 70 ° C

Electrical specifications

  • Charging power: 7,4kw
  • Nominal voltage CA: 230V ± 10%
  • Nominal current: 32A (single-phase)
  • Configurable current: 6A to the nominal current
  • Connector type (IEC 62196-2): Type 2
  • Section of the input cable: up to 13 mm²
  • Nominal frequency: 50Hz / 60Hz
  • Degree of protection: IP55 / IK10
  • Overvoltage category: CAT III
  • Residual current detection: DC 6MA
  • Differential (RCCB): External Mandatory (according to local regulations)
  • Additional protections: Optional external shunt (Disconnection by contact welding)

User interface and communications

  • Connectivity: WiFi, Bluetooth
  • User identification: App and Portal Wallbox
  • User interface: App and Portal Wallbox
  • Status information: LED RGB Halo, App and Portal Wallbox
  • Energy management included: Static loading
  • Optional energy management: Dynamic loading, solar load, external MID counter (Requires external meter)
  • External Communication: Ocpp, API and SDK for Partners

Regulations

  • Standards: IEC 61851-1, IEC 62196-2
  • Policies: Red 2014/53 / EU, ROHS 2011/65, UK SMART CHARGING REGULATIONS

Benefits Wallbox Press MAX 7.4KW

Most housing in Spain have supply single-phase, and for them the Press Max of 7.4kw is the option that makes the most of a line of 230V and 32A. In practice, a night load at this power allows you to replace the kilometers of daily use of almost any electric vehicle within a few hours, and much faster than with a conventional domestic plug.

The key to installing it without startup on the invoice is in your Adjustable current from 6A and in the Static loading Included: A limit is set according to the contracted power and the charger never exceeds it. To go a step further, with a external meter the dynamic management, which reduces the load power when other appliances are lit at home and recovers it when they turn off.

If you have self-consumption, the Optional solar load Allows you to allocate the surplus of your solar panels, Reducing the cost of each recharge. The 5-meter cable It covers the usual distance between the garage wall and the vehicle's jack.

¿Single-phase of 7.4kw or three-phase?

When to choose 7,4kw

Is the logical choice if your home has supply single-phase, which is the most common case in the residential field. In addition, many vehicles limit the load in monophasic alternating current, so the actual power will also depend on On-board charger of the car.

When to rate a three-phase version

If you have supply three-phase and your vehicle admits more power in AC, the Pulsar Max range is also available in versions of 11kw and 22kw.

Designed for day to day

The RGB LED Ring Halo show at a glance if the car is loading, waiting or with any incidence, and from the App and the portal of Wallbox The loader is managed and monitored remotely. Its protection IP55 / IK10 allows mounting it abroad, and the 6MA DC residual current detection integrated simplifies electric protection, since it is enough with a External differential type A.

To close the circle, combine the charger with inverters hybrid and lithium batteries It also allows loading with solar energy stored during the day. On Tienda Solar we advise you to integrate the recharge in your installation, and in the Blog Tienda Solar You have guides and technical articles developed by experts on electric mobility and self-consumption.

Frequently Asked Questions (FAQ)

1. Does Press Max 7,4kw work with my single-phase installation?

Yes. It is designed for 230v single-phase with a nominal current of 32a, adjustable from 6a To adapt to the contracted power.

2. Do I have to increase the contracted power to install it?

Not necessarily. Thanks to the Configurable current and at Static loading Included, you can limit the power of the charger. With a external meter optional, the dynamic management Adjust the load in real time according to the consumption of the house.

3. How is the charger controlled?

By App and the portal of Wallbox, with connection by WiFi or Bluetooth. The user identification is also performed from the APP and the portal.

4. Can it be used with a self-consumption installation?

Yes. With the optional function of solar load and a external meter, the charger can prioritize surpluses of your installation. If you are starting, consult our Solar kits.

5. What a differential do I need?

A External differential type A, according to local regulations, since the charger integrates 6MA DC residual current detection.

6. Is it suitable for exterior?

Yes. Your envelope has protection Ip55 and Ik10 and it works between -30 ° C and 50 ° C, with full power up 40 ° C.