- New
The Stationary Battery Tab 12 OPzS 1500 it's a glass OPzS of 2v and four poles with a nominal capacity of 1,500 ah according to the DIN denomination, the largest of the series of 797 mm high from the manufacturer Their 12 tubular positive plates of great height, with alloy Bajo Antimony (≤1.65% SB), they exceed the 2,000 ah in slow downloads (2.226 Ah in C120 and 2,294 Ah in C240and deliver 1,701 Ah in C12, on a plant of solo 275 x 210 mm. It is a large-scale accumulation solution for industrial, microred, agricultural holders, telecommunications centers and high consumption solar installations. Your internal resistance of 0.225 MΩ and the Short circuit current from 9,000 to ensure stable tension with inverters of very high power. Offers 2,300 cycles 60% of DOD and one 20 year design life in flotation at 20 ° C, and it meets IEC 61427, IEC 60896-11, DIN 40736-1 and EN 50272-2.
Detailed technical characteristics
Electrical data
- Model: TAB 12 OPzS 1500
- Technology: OPzS, lead-open acid with positive tubular plate
- Nominal voltage: 2V
- Nominal capacity (denomination DIN, C10:) 1,500 Ah
- C240 Up to 1.85 V / element (20 ° C:) 2,294 Ah
- C120 Up to 1.85 V / element (20 ° C:) 2.226 Ah
- C48 Up to 1.80 V / element (20 ° C:) 2.024 Ah
- C24 up to 1.80 V / element (20 ° C:) 1.807 Ah
- C12 up to 1.80 V / element (20 ° C:) 1,701 Ah
- Internal resistance: 0,225 mΩ
- Short circuit current: 9,000 A
- Positive plates: 12
- Number of poles: 4
Mechanical data
- Long: 275 mm
- Width: 210 mm
- High no connectors: 797 mm
- High with installed connectors and covers: 811 mm
- Distance between poles: 140 mm
- Weight with electrolyte (approx.:) 115 kg
- Dry weight (approx.:) 81 kg
Materials and construction
- Positive plates: tube with special alloy bajo Antimony (≤1.65% SB)
- Negative plates: gridboat with optimized low antimony alloy
- Separators: Low resistance microporous PVC
- Electrolyte: diluted sulfuric acid
- Container: Transparent san high resistance to impact
- Cover: ABS robust
- Poles: brass insert M10 with rubber gasket, acid resistant and suitable for impedance measurement
- Connectors: screwed, with encapsulated head steel screws; flexible isolated and rigid optional
- Plugs: antideflages ceramics, also available in funnel version
Terms of use
- Cycles: 2.300 to 60% of DOD, 20 ° C
- Design life: 20 years in Standby, 20 ° C
- Recommended temperature: 10 ° C at 30 ° C
- Maximum temperature: 55 ° C
- Self: approx. 2.5% monthly at 20 ° C
- Maximum storage: 3 months at 20 ° C, , 2 months at 30 ° C or 1 month at 40 ° C
- Maintenance: low need of filling
Regulations and quality
- IEC 61427: batteries for photovoltaic systems
- IEC 60896-11: open-acid stationary batteries
- DIN 40736-1: elements OPzS
- EN 50272-2: stationary battery security
- European production with ISO 9001, , ISO 14001 and BS OHSAS 18001
Benefits of the stationary battery Tab 12 OPzS 1500
The 12 OPzS 1500 is designed for projects in which the surface of the battery room is the limiting factor. Occupies exactly the same plant as the 12 OPzS 1200 (275 x 210 mm), but take advantage of the height with tubular plates of 797 mm add 300 Nominal Ah more and raise the C120 1,908 to 2,226 ah. If there is sufficient free height, it is the most efficient way to concentrate energy per square meter floor.
More than 2,000 ah in slow downloads
With 2.226 Ah in C120, , 2,294 Ah in C240 and 2,024 Ah in C48, a single series string in series can cover consumption that with smaller models would demand several banks in parallel. Less Strings mean a more homogeneous current distribution, less connections and easier maintenance.
Firm answer before great powers
The internal resistance of 0.225 MΩ and the short circuit current from 9,000 to allow the bank to feed various systems inverters hybrid or inverters- paraglays in parallel or in three-phase configuration, maintaining stable tension during starter starters, compressors and machinery.
Life OPzS for decades
The tubular positive plate retains active matter during cycling and is the reason why OPzS they exceed flat plane batteries clearly, such as aGM batteries. Tab certifies 2,300 cycles 60% of DOD and 20 years of design life, with curves that show a significant increase in cycles when the daily discharge is more moderate.
Simple Bank Supervision
The transparent container it allows visually reviewing the level of electrolyte, and the poles with brass insert M10 admit the impedance measurement glass to glass, a key predictive maintenance tool in industrial and critical facilities.
Large-scale banks design
Energy and Bank Weight
Own guidance calculation on nominal capacity (it is not a manufacturer's data:)
- By glass: some 3 kWh in C10 and some 4,45 kWh in C120
- 24V Bank (12 glasses:) some 36 kWh nominal in C10 and some 1,380 kg electrolyte
- 48V Bank (24 glasses:) some 72 kWh nominal in C10 and some 2,760 kg electrolyte
Height, manipulation and bench
With 811 mm tall with connectors and some 115 kg by glass, the bank requires robust benches of a single level or low-rise, checking the soil carrying capacity and lifting mechanical means for discharge and placement of the vessels.
Protections and loading equipment
The short circuit current from 9,000 to it should be considered when selecting fuses and continuous disconnectors, which must be installed as close as possible to the bank. The inverter solar or regulator must admit lead-acid batteries open and configure with the tensions of the TAB manual, which are not listed on the Technical Sheet. The distance between 140 mm poles it is the same as that of the 12 OPzS 1200.
To generate the energy you need a bank on this scale, combine it with solar panels high power mounted on structures for solar panels, or part of one of our solar kits isolated. If you prefer to compare with a technology without maintenance, consult our lithium batteries. On Tienda Solar we help you with all the material material, and in the Blog Tienda Solar you will find purchase guides and technical items prepared by experts.
Frequently Asked Questions (FAQ)
1. When is the 12 OPzS 1500 instead of the 12 OPzS 1200?
When the battery room has little surface but height sufficient. Both glasses occupy 275 x 210 mm on the floor and have the same distance between poles, but the 12 OPzS 1500 811 mm with connectors versus 660 mm and offers 2.226 Ah in C120 facing 1,908 ah. If the height is limited by cabinets or shelves, the 12 OPzS 1200 is the alternative.
2. How is a vessel of 115 kg manipulated?
For its weight, the download and placement of each glass must be done with mechanical means (transparent, forklift or hoist) and always in a vertical position, avoiding blows and dumps. During manipulation, gloves, protective glasses and safety footwear should be used.
3. Why does the manufacturer's table show C10 capacity?
The nominal capacity of 1,500 Ah is the one that gives name to the model according to the DIN nomenclature for batteries OPzS. The Tab Technical Sheet details the capabilities for regimes 12 to 240 hours (from C12 to C240), which are commonly used to size backup systems and isolated solar installations.
4. Can I install the bank on the outside?
It is not recommended. TAB indicates a working range of 10 ° C at 30 ° C with a maximum of 55 ° C, and both heat and extreme cold affect life and ability. The right thing is a closed technical place, ventilated according to EN 50272-2 and protected from direct and weathering solar radiation.
5. Is it adequate for the support of an industrial ship or a farm?
Yes. With 1,701 Ah in C12 and 1.807 Ah in C24 per glass, it allows to sustain important loads for many hours, and its 20 year design life in flotation, it is ideal for industrial backup systems, irrigation pumps, farms or telecommunications centers.
6. What advantages have a similar capacity lithium battery?
The OPzS they stand out for their robustness, its long trajectory in stationary applications and their tolerance to demanding conditions of use. The lithium batteries, on the other hand, do not require filling and allow you to take advantage of a greater depth of discharge. The choice depends on the budget, space and capacity for maintenance installation.