- On sale!
Inverter Solar charger Axpert Max E 11kw 48V Solitia 96-346071-00g
The Axpert Max E-11000 is a inverter Solar charger of 11 kW and 48 V to Isolated and backup systems, that integrates inverter of pure sine wave, Solar Charger MPPT and battery charger from network or generator. Admits 11,000 WP of panels with 2 FV entries from 18 a and a MPPT range of 90 to 450 V, which allows long chains and less direct current wiring. Charge the battery with up 150 a, both from the panels and from the network or a generator, and delivery 22,000 VA of peak for starter and compressor startup. Highlights for its Independent battery design, which allows you to run with solar energy although there is no connected battery, by Wi-Fi integrated with mobile app, the BMS, the antipolvo kit built-in and the Substitutable fan. Supports up to 6 units in parallel And it offers configurable timers to prioritize the use of solar energy or network.
Detailed technical characteristics
General data
- Model: Axpert Max E-11000 (Reference 96-346071-00g)
- Nominal power: 11,000 VA / 11,000 W
- Parallel operation: up to 6 units
- Battery voltage: 48 V DC
AC
- Nominal voltage: 230 V AC
- Selectable range: 170-280 V AC (computer equipment) / 90-280 V AC (electronics)
- Frequency: 50/60 Hz (Automatic detection)
- Compatible sources: Electric network or generator
AC
- Voltage regulation (Battery mode): 230 V AC ± 5%
- POWER OF PICO: 22,000 VA
- Maximum efficiency: 93%
- Transfer time: 10 ms (computer equipment) / 20 ms (electronics)
- Waveform: pure-stenoidal
- Void consumption: Less than 70 W
Drums
- Flotation voltage: 54 V DC
- Overload protection: 63 V DC
Solar charger and BC charger
- Type of regulator: Mppt
- Number of FV entries: 2
- Maximum FV power: 11,000 W
- MPPT range: 90 to 450 V DC
- Maximum tension in open circuit (VOC): 500 V DC
- Maximum FV input current: 18 a x 2
- Maximum current of solar load: 150 a
- Maximum current current AC: 150 a
- Maximum total load current: 150 a
Communication and functions
- Interfaces: USB, RS232, RS485, Wi-Fi, dry contact
- Monitoring: Wi-Fi integrated with app for Android and iOS
- USB on-the-go: Yes
- BBS port: reserved
- State indication: RGB lights
- Independent Battery Design: Yes
- Timers of use AC / FV and priorities: configurable
- Antipolvo kit: integrated
- Fan: replaceable
Physical and environmental data
- Dimensions (PR X AL): 147.4 x 432.5 x 553.6 mm
- Net weight: 18.4 kg
- Operating temperature: -10 to 50 ° C
- Storage temperature: -15 at 60 ° C
- Humidity: 5 to 95% non-condensation
- Rules: EC
Benefits of the Axpert Max E-11000
High voltage FV: Long chains and less losses
Unlike inverters Isolated with low voltage FV, the MAX and works with an MPPT range of 90 to 450 V and up 500 V in open circuit. This allows you to connect many solar panels In series, reduce the continuous wiring section and limit long run losses, something usual in farms and country houses.
It works even without battery
Thanks to his Independent battery design, The equipment can feed loads directly with solar energy even if there is no connected battery. It is useful during start-up, in maintenance or diurnal uses.
150 A from Panels or from Network
With 150 a of load so much solar and AC, can quickly recharge large banks of lithium batteries 48 V, taking advantage of the sun's hours or a generator for the shortest possible time.
Prepared for demanding environments
The antipolvo kit integrated and the Substitutable fan Facilitate maintenance in ships, agricultural stores or dust areas, where the equipment without filter usually suffer.
Scalable
With up to 6 units in parallel, the system can grow, as a guidance calculation, until some 66 kW of nominal power.
Planning a system with Axpert Max E
Solar field
Distribute the panels between the 2 entries, respecting the 18 a per entrance and the 500 V of maximum voltage at the minimum temperature of the place. For the assembly you have Structures for Solar Panels.
Drums
The team works with batteries 48 V. To take advantage of the 150 a loading, the battery must admit that current; Check the compatibility of the BMS with the inverter.
What to keep in mind
Is a inverter For isolated systems (OFF-GRID): It is not designed to inject surpluses to the network. For self-consumption with pouring, compare with our inverters hybrid. More options in inverters solar and Solar kits of Tienda Solar, and dimensioned guides in the Blog Tienda Solar.
Frequently Asked Questions (FAQ)
1. Does the Axpert Max E-11000 have 2 MPPT?
Yes. It has 2 FV entries from 18 a each, with an MPPT range of 90 to 450 V and a maximum FV power of 11,000 W.
2. Can it work without batteries?
Yes. Your Independent battery design It allows you to feed loads with solar energy without a connected battery, although to have energy at night or in cuts you need battery.
3. How many teams can I put in parallel?
Until 6 units, which allows us to expand the power of the system.
4. What is the difference with the Axpert Ultra 11K?
The Ultra Add double input (network and generator), double programmable output, integrated current transformer and GFCI / RSD / AFCI options, with up 12,000 WP. The Max E is a simpler solution with 11,000 WP, 150 A load and Wi-Fi.
5. Can I connect it to a generator?
Yes. The AC entry is compatible with Electric network or generator, and the equipment can charge the battery from them with up 150 a.
6. Do you include Wi-Fi?
Yes. Integra WiFi for monitoring from the mobile app (Android and iOS).
- Power (kW)
- 10 - 14.9
- Phase Type
- Single phase
- Max Current Input (A)
- 15 - 15.99
- Compatibility list
- Pylontech Force L2
Pylontech US2000C / US3000C / US5000
Pylontech US3000C
Pylontech US5000 / Force L2
Turbo Energy (Slim) - MPPT
- 2