Microinverter Atmoce MI-1200-2m 1200W 2 in 1

Benefits Microinverter Atmoce MI-1200-2m

As a standing model of the series, the MI-1200-2m is designed for installations with Solar of higher individual power, allowing the performance of each module to maximize. Like the rest of the family, each microinverter manage its 2 entries completely independently, which translates into a Energy efficiency up to 50% higher In facilities with partial shading, different orientations or punctual dirt, versus configurations with inverters hybrid or inverters networking Connected in series.

The MPPT efficiency of 99.9% ensures that practically all the energy available in the tracking voltage range (39V to 55V In this model) it takes advantage effectively. At the security level, it incorporates Safe voltage for human operation below 60VDC, Zero Risk Electric Arc in DC and Quick shutdown at module level, guarantees especially relevant in facilities of greater power such as those that usually use this model.

Quick installation and intelligent management

The MI-1200-2M shares the same agile installation philosophy as the rest of the series: Commissioning in just 5 minutes, lightweight design for a simpler installation and maintenance, and Diagnosis, control and intelligence at the module level. The management and maintenance management (O & M) driven by artificial intelligence covers all the components of the system, while the Design of the photovoltaic matrix generated from photographs Simplifies significantly the planning process of the installation. Incorporate Active snow removal technology and Matrix phase configuration For more demanding installation scenarios.

Detailed technical characteristics

Input parameters:

• Compatibility of photovoltaic module: 54/108, 60/120, 66/132 and 72/144 cells (whole / stockings)
• Minimum voltage / maximum input: 16V ~ 60V
• Maximum power tracking voltage range: 39V ~ 55V
• Voltage range of MPPT: 16V ~ 60V
• Nominal input voltage: 42v
• Input voltage at startup: 22v
• Continuous maximum input current (per input PV): 20a
• Maximum input short circuit current (per input PV): 25a
• Survival class of Puerto CC: II
• Puerto CC feedback current: 0a
• Configuration of the photovoltaic set: 1x1 grounded matrix 1x1

Output parameters:

• Nominal voltage: 220/230 / 240V
• Voltage range: 176V ~ 276V
• Nominal output power: 1200w
• Maximum apparent power: 1200va
• Nominal output current (220V / 230V / 240V): 5,45A / 5,22A / 5,00A
• Maximum output current (220V / 230V / 240V): 5,73A / 5,48A / 5.25A
• Max. microinverters per circuit of 20a three-phase: 3
• Max. microinverters by circuit of the three-phase 25th: 3
• Max. microinverters By circuit of 32A three-phase: 4
• Nominal frequency: 50 / 60Hz
• Extended frequency range: 45Hz ~ 65Hz
• Power consumption at night: 0mw
• Total harmonic distortion (THDI):
• AC Overvoltage Protection: Type II

Efficiency parameters:

• Maximum efficiency: 98,2%
• EU efficiency: 97,7%
• MPPT efficiency: 99,9%

Mechanical parameters:

• Range of room temperature: -40 ° C ~ 65 ° C
• Storage temperature range: -40 ° C ~ 85 ° C
• Relative moisture range: 4% ~ 100%, condensing
• DC connector: Stäubli Mc4, 2 pairs
• AC connector: MT-02502-A, 1 Linking
• Dimensions (without support): 250 x 202 x 36mm
• Weight (without support): 2,1kg
• Refrigeration: natural convection
• Degree of protection: Ip67
• Maximum altitude: 3000m
• Noise:
• Communication: PLC
• Anti-Isla Protection: Yes

Certifications: IEC 62109-1 / -2 (safety), IEC 61000-6-1 / -2 / 3 / -4, EN 62920 (EMC), VDE 0124, VDE 4105, UTE 0126, EN 50549, EN 50530, AS 4777.2 (Compliance with electrical network).

Frequently Asked Questions (FAQ)

1. How many I can connect to a MI-1200-2m?
This microinverter managed by 2 Solar independently, each with its own MPPT input, being the most powerful model of the MI series.

2. Is it suitable for installation abroad?
Yes, it has protection Ip67 and is classified for outdoor environmental category, with a range of operating temperature of -40 ° C to 65 ° C.

3. What is the difference to MI-1200-2m from the rest of the series?
Is the model with Greater nominal output power (1200W) of the range, indicated for Solar of higher individual power within the compatibility range of the equipment.

4. How does the microinverter with the monitoring system?
By means of technology PLC (Power Line Communication), with a scope of up 350 meters, without the need for additional communication wiring.

5. What guarantee does this offer microinverter?
The manufacturer offers a upgrade of up to 25 years, in line with the usual lifespan of a residential photovoltaic installation. Consult more technical content in the Blog Tienda Solar.

Complete your installation in Tienda Solar with solar, solar and Solar kits for your photovoltaic system.