Microinverter Atmoce MI-1000-2m 1000W 2 in 1

Benefits Microinverter Atmoce MI-1000-2m

The great advantage of a microinverter in front of a inverter Central or String is that each panel (or in this case, each couple of ) Work independently. In the MI-1000-2m, this translates into a Energy efficiency up to 50% higher In facilities with partial shading, different roof orientations or punctual dirt on some modules, since a problem in a panel does not drag the performance of the rest of the system, something that is happening in facilities with inverters hybrid or inverters networking Conventional connected in series.

Its architecture MLPE (MODULE-LEVEL POWER ELECTRONICS) eliminates typical bottlenecks of centralized systems, while the MPPT efficiency of 99.9% It guarantees an almost total use of the available energy at every moment. At the level of security, the design incorporates Safe voltage for human operation below 60VDC, Zero Risk Electric Arc in DC and Quick shutdown at module level, especially relevant features in residential facilities with frequent access to the deck.

Quick installation and intelligent management

The MI-1000-2m highlights for a Commissioning in just 5 minutes, thanks to a lightweight design that simplifies both the installation and the subsequent maintenance (O & M). The system allows Diagnosis, control and intelligence at the module level, with operation and maintenance management supported by artificial intelligence for all system components, as well as the possibility of generating the design of the photovoltaic matrix directly from the roof photographs. In addition, it incorporates Active snow removal technology and Matrix phase configuration, Functions especially useful in installations exposed to cold climates.

Detailed technical characteristics

Input parameters:

• Compatibility of photovoltaic module: 54/108, 60/120, 66/132 and 72/144 cells (whole / stockings)
• Minimum voltage / maximum input: 16V ~ 60V
• Maximum power tracking voltage range: 33V ~ 55V
• Voltage range of MPPT: 16V ~ 60V
• Nominal input voltage: 42v
• Input voltage at startup: 22v
• Continuous maximum input current (per input PV): 20a
• Maximum input short circuit current (per input PV): 25a
• Survival class of Puerto CC: II
• Puerto CC feedback current: 0a
• Configuration of the photovoltaic set: 1x1 grounded matrix 1x1

Output parameters:

• Nominal voltage: 220/230 / 240V
• Voltage range: 176V ~ 276V
• Nominal output power: 1000w
• Maximum apparent power: 1000va
• Nominal output current (220V / 230V / 240V): 4.55A / 4,35A / 4,17A
• Maximum output current (220V / 230V / 240V): 4,77A / 4,57A / 4,38A
• Max. microinverters per circuit of 20a three-phase: 3
• Max. microinverters by circuit of the three-phase 25th: 4
• Max. microinverters By circuit of 32A three-phase: 5
• Nominal frequency: 50 / 60Hz
• Extended frequency range: 45Hz ~ 65Hz
• Power consumption at night: 0mw
• Total harmonic distortion (THDI):
• AC Overvoltage Protection: Type II

Efficiency parameters:

• Maximum efficiency: 98,2%
• EU efficiency: 97,7%
• MPPT efficiency: 99,9%

Mechanical parameters:

• Range of room temperature: -40 ° C ~ 65 ° C
• Storage temperature range: -40 ° C ~ 85 ° C
• Relative moisture range: 4% ~ 100%, condensing
• DC connector: Stäubli Mc4, 2 pairs
• AC connector: MT-02502-A, 1 Linking
• Dimensions (without support): 250 x 202 x 36mm
• Weight (without support): 2,1kg
• Refrigeration: natural convection
• Degree of protection: Ip67
• Maximum altitude: 3000m
• Noise:
• Communication: PLC
• Anti-Isla Protection: Yes

Certifications: IEC 62109-1 / -2 (safety), IEC 61000-6-1 / -2 / 3 / -4, EN 62920 (EMC), VDE 0124, VDE 4105, UTE 0126, EN 50549, EN 50530, AS 4777.2 (Compliance with electrical network).

Frequently Asked Questions (FAQ)

1. How many I can connect to a MI-1000-2m?
This microinverter managed by 2 Solar independently, each with its own MPPT input, which allows to optimize the individual production of each panel.

2. Is it suitable for installation abroad?
Yes, it has protection Ip67 and is classified for outdoor environmental category, with a range of operating temperature of -40 ° C to 65 ° C.

3. What advantage does it offer against a inverter Central or String?
When working each panel independently, energy efficiency can be up to 50% higher In facilities with partial shading, different orientations or punctual dirt, without a panel affects the performance of the rest.

4. How does the microinverter with the monitoring system?
By means of technology PLC (Power Line Communication), with a scope of up 350 meters, without the need for additional communication wiring.

5. What guarantee does this offer microinverter?
The manufacturer offers a upgrade of up to 25 years, in line with the usual lifespan of a residential photovoltaic installation. Consult more technical content in the Blog Tienda Solar.

Complete your installation in Tienda Solar with solar, solar and Solar kits for your photovoltaic system.