- New
The Solis S6-EH1P8K-L-Plus is a hybrid inverter single-phase of 8 kw of the Solarrator series, designed to work with Low voltage batteries of 40 to 60 Vso lithium like lead-acid. Your first advantage is the storage power: Load and download the battery to 8 kW up 190 a, and delivery 8 kW backup with an overload of 200% for 10 seconds and switching in less than 10 ms. The second is his photovoltaic field: admits 16 KW of recommended FV power (160% of its nominal power) in 2 MPPT with 4 Strings, MPPT Rank of 90 to 435 V and 16 a per entry. The third is his versatility: Entry for generator, up to 6 units in parallel, Late of existing facilities and operation isolated only with panels. Includes Industrial LCD Screen 7 inches, protection Ip66 and certification NTS 631 Type A.
Detailed technical characteristics
DC input (photovoltaic)
- Maximum recommended FV power: 16 kW
- Usable maximum FV power: 12.8 kW
- Maximum input voltage: 500 V
- Nominal voltage: 330 V
- Starting voltage: 90 V
- MPPT voltage range: 90 – 435 V
- Maximum input current: 32 A / 32 A
- Maximum current per input DC: 16 A
- Maximum short circuit: 40 A / 40 A
- Number of MPPT / maximum number of strings: 2/4
Drums
- Type of battery: ion-lithium / lead-acid
- Battery voltage range: 40 – 60 V
- Maximum loading / unloading power: 8 kW
- Maximum loading / unloading current: 190 A
- Number of battery ports / bMS ports: 1/1
- Communication with battery: CAN / RS485
Exit AC (Network)
- Nominal output power: 8 kW
- Maximum apparent output power: 8 kVA
- Nominal network voltage: L / N / PE, 220 V / 230 V
- Nominal frequency: 50 Hz / 60 Hz
- Nominal output current: 36.4 A / 34.8 A
- Power factor: greater than 0.99 (adjustable 0.8 capacitive to 0.8 inductive)
- Thdi: lower than 3%
AC Entrance (Network)
- Input voltage range: 187 – 253 V
- Maximum input current: 50 A
Output AC (backup)
- Nominal power: 8 kW
- Maximum apparent power: 2 times the nominal power for 10 s
- Switching time: less than 10 ms
- Nominal voltage: L / N / PE, 220 V / 230 V
- Nominal frequency: 50 Hz / 60 Hz
- Nominal current: 36.4 A / 34.8 A
- Maximum current current AC (PASSSTHROUG:) 50 A
- THDV (Linear Load:) lower than 2%
AC input (generator)
- Maximum entry power: 8 kW
- Nominal input current: 36.4 A / 34.8 A
- Nominal input voltage: 1 / N / PE, 220 V / 230 V
- Nominal frequency: 50 Hz / 60 Hz
Efficiency
- Maximum efficiency: 96.2%
- European efficiency: 96.1%
- Maximum battery charge efficiency from FV / from AC: 95.3% / 93.9%
- Battery discharge efficiency: 93.8%
Protections
- Protection against outflowing overcurrent: Yes
- Isolation resistance monitoring: Yes
- Residual current detection: Yes
- Integrated FV Precioner: Yes
- Reverse polarity protection DC: Yes
- Protection class / overvoltage category: I / II (FV and Battery), III (Network, backup and generator)
- AFCI 2.0 Integrated: optional
- Anti-isla protection: Yes
General data
- Dimensions (width × high × background:) 335 × 560 × 253 mm
- Weight: 23.5 kg
- Topology: no insulation (FV), with insulation (battery)
- Own consumption: less than 40 W
- Operating room temperature: -25 ° C to +60 ° C
- Relative humidity: 0 – 100%
- Degree of protection: IP66
- Emission of noise (typical:) less than 65 dB (A)
- Refrigeration: redundant smart ventilation
- Maximum performance altitude: 3000 m
- Network connection rules: NTS 631 Type A, , IN 50549-1, , IEC 62116, , IEC 61727, , IEC 60068, , IEC 61683, , IN 50530, , CEI 0-21, , G98, , G99, , NRS 097-2-1, , MEA, , PEA, , NBR 16149, , NBR 16150
- Security Standards / CEM: IEC / EN 62109-1 / -2, , EN 61000-6-2 / -3
Connections and Communication
- FV connection: mC4 connectors
- Battery connection: bornero
- AC connection: bornero
- Screen: 7 "LCD", , Bluetooth and app
- Serial interfaces: WiFi + LAN + Bluetooth, , CAN-BMS, , CAN-Parallel × 2, , RS485-Meter, , RS485, , DRM, , SAY, , DO × 2
- Optional interfaces: 2G / 3G / 4G
Benefits Hybrid Inverter Solis S6 8kw
Solis is one of the manufacturers of inverters with greater world presence, and its series Solar S6-EH1P-L-PLUS is designed for houses and small businesses that need real autonomy against network cuts. The model of 8 kW is the ideal option when the demand exceeds what they cover inverters hybrid of 5 or 6 kW, without leaping to a three-phase installation.
Low voltage batteries: maximum freedom of choice
Unlike high-voltage hybrids, depending on specific batteries, the S6-EH1P8K-L-Plus works with any battery of 40 to 60 V, either lithium or of lead-acid. This opens the door to use lithium batteries 48 v of multiple manufacturers, or even gel batteries in facilities that already have them. With 190 A load and unloading current, the battery can contribute the 8 kW full of the inverter.
8 kW backup with peaks of 200%
In isolated mode, the inverter delivery 8 kW nominal and supports a 200% overload for 10 seconds, enough to start engines, water pumps and air conditioning equipment without the system to fall. Switching backup occurs in less than 10 ms, and the passage of step up 50 A it allows to feed the loads from the network through the inverter when there is supply. In addition, the user can configure the battery level reserved for backup and prioritize the critical charges with the intelligent management of loads.
Overdimensioned FV of 160% with 4 Strings
The S6 8kw admits 16 kW solar panels, a 160% of its nominal power, scattered in 2 MPPT with 2 strings each. Have 4 entrances facilitates distributing modules in various orientations or skirts, and 90 v start voltage with a MPPT range of 90 to 435 V it allows you to take advantage of low irradiance hours.
Generator, parallel and coupling AC
The Solarrator series is designed for demanding facilities. Has specific entry for generator with various forms of connection and automatic control, allows you to connect up to 6 inverters in parallel to expand the capacity of the system and is compatible with existing photovoltaic installations connected to Network, incorporating pouring and use control in isolated mode. It can also work in mode isolated alone with panels, without battery, reducing the initial investment.
Prepared for Spain: NTS 631 Type A
Between its network connection rules figure the NTS 631 Type A, the technical monitoring standard applicable to generation modules connected to the network in Spain, together with the IN 50549-1. This simplifies the legalization of the installation with the distributor. To this add protection IP66, the operation between -25 ° C and +60 ° C and the option of AFCI 2.0 for detection of electric arcs.
Intelligent management and 7-inch screen
The inverter is prepared for virtual plants (VPP) and for optimization strategies based on artificial intelligence that help maximize savings. Your 7-inch industrial LCD screen facilitates local configuration, and connectivity WiFi, LAN and Bluetooth series allows remote monitoring through the app.
Solar field configuration: Orientation example
The Solis S6 8kw has a maximum voltage of 500 V input, lower than that of many inverters 600 v, so the strings should be somewhat shorter. Each entry admits 16 A, with a maximum of 40 A short circuit by MPPT.
Like orientative example (own calculation, not included in the file), with a panel 590 W, , VOC 51,88 V and ISC 14.48 A, the VOC A -10 ° C the 56.6 V per module, so that each string could include up 8 modules (approx. 453 V). With 3 8 panel strings some 14.2 kWp, below 16 kW recommended. The final design must be validated with the minimum temperature of the site and the sizing tool Solis.
For the assembly of the modules you will need some structures for solar panels appropriate to the deck, and if you prefer a set already calculated, check our solar kits.
For what facilities are you appropriate?
- Housing with high consumption: aerotermia, electric vehicle charger, pool or air conditioning.
- Zones with unstable network or frequent cuts, thanks to his backup of 8 kW and switching in less than 10 ms.
- Farms and country houses that combine panels, batteries and generator.
- Existing facilities who want to add storage while maintaining their inverter of network.
- Small business that need to expand power with several inverters in parallel.
Buy the inverter Solis S6 8kw in Tienda Solar
On Tienda Solar we offer installers and individuals Spain and Portugal inverters hybrids, lithium and lead batteries, panels and structures of first brands, along with technical advice to configure each system. If you want to compare inverters of low and high voltage, learn to dimension a 48 V battery or prepare a generator installation, visit the Blog Tienda Solar, where our technicians publish purchase guides and specialized items.
Frequently Asked Questions (FAQ)
1. What batteries can I connect to Solis S6-EH1P8K -L-PLUS?
Any battery with a tension 40 to 60 V, of ion-lithium or lead-acid. For lithium batteries with BMS, communication is made by CAN or RS485. With a stream of 190 A, the inverter you can upload and download 8 kW. Always check the compatibility list of Solis to ensure communication with the BMS.
2. Can it work without battery?
Yes. The inverter supports operation isolated alone with panels, which allows you to start without battery and add it later. In this way, the available power depends on solar production at all times.
3. Is it valid to legalize an installation in Spain?
Among the Network Connection Standards of its Technical Sheet Figure The NTS 631 Type A, applicable in Spain, together with the IN 50549-1. Even so, the specific documentation required may vary according to the distributor, so it is advisable to review it before processing.
4. Can I connect a generator?
Yes. It has a aC input Specific for generator up 8 kW, with different connection methods and automatic control starter, ideal for isolated homes or areas with prolonged cuts.
5. Can you connect several inverters in parallel?
Yes. The series admits up to 6 units in parallel thanks to its two ports CAN-Parallel, which allows us to expand the system's power as the needs grow.
6. Do you make noise?
The 8 kW model uses refrigeration by redundant smart ventilation, with a typical noise emission less than 65 dB (A). It is recommended to install it in garage, protected technical or exterior room, away from bedrooms. If you are looking for an alternative to add storage without changing inverter, you can also assess the batteries Plug & Play.
- Power (kW)
- 6 - 9.9
- Phase Type
- Single phase
- MPPT
- 2
- Inverter Type
- Hybrid