• On sale!
LV HUB FOR BATTERIES
PYLONTECH LV HUB FOR BATTERIES
LV HUB FOR BATTERIES
PYLONTECH LV HUB FOR BATTERIES

Communication hub Pylontech For 5 Strings LV-Hub

LV-HUB-PT
€542.42
Tax included

The Pylontech Lv-hub is the communications concentrator that allows you to join Up to 5 battery groups of low voltage of 48V in a single storage system and present them before the inverter as a single battery. According to the manufacturer, each group may include Up to 8 US2000B Plus or US3000 modules, so the lv-hub is the key piece to build banks of lithium battery Great capacity in large homes, shops and small industries. Communicates with the inverter for Can (500 Kbps, with selectable termination resistance of 0 or 120 Ω) or by Rs485 (9600 or 115200 baud), and manages up to 5 groups in both protocols. Work 48 VDC, it has a consumption of solo 2 W and a compact rack format 442 x 150 x 44 mm with a weight of 3.5 kg. Offers protection Ip20, a life of 15 years and a rank of operation -20 to 60 ° C.

 

Detailed technical characteristics

Electrical and communication data

  • Model: Lv-hub
  • Manufacturer: Pylontech
  • Operating voltage: 48 VDC
  • Communication interfaces: CAN / RS485
  • System consumption: 2 W
  • Can: until 5 groupsspeed 500 Kbps, termination resistance 0/120 Ω
  • Rs485: until 5 groupsspeed 9600/115200 BAUD

Management capacity

  • Groups of batteries per hub: maximum
  • Modules by group (according to manufacturer): Up to 8 US2000B Plus or 8 US3000

Mechanical and environmental data

  • Dimensions: 442 x 150 x 44 mm
  • Weight: 3.5 kg
  • Degree of protection: Ip20
  • Lifetime: 15 years
  • Operating temperature: -20 to 60 ° C
  • Storage temperature: -40 to 80 ° C

Front panel elements

  • Ports Can in and Can out
  • Port Rs232
  • Links For battery groups
  • Dip switch Address (Add) and reset
  • LED indicators state and number of groups
  • Ignition switch feeding

Benefits Pylontech Lv-hub

Batteries Pylontech Low voltage are connected in parallel forming groups or "batteries" of several modules, each with a master battery that manages communication. When a project needs more capacity than a single group admits, the Lv-hub Gather the information of all of them and delivery to inverter For a single link, so that the system behaves like a single large battery.

Up to 5 groups of batteries in a single system

With capacity for 5 groups up 8 modules Each one, the LV-Hub allows us to manage up 40 modules In total. As a guidance reference, with US2000B plus modules of 2.4 kwh they reach some 96 kwh, and with US3000 modules 3,55 kWh, some 142 kwh. These figures place the LV-Hub in the field of large residential, commercial and small industry systems with inverters hybrid of 48V.

Flexible communication by CAN or RS485

Hub adapts to the protocol of inverter: Can 500 Kbps with selectable termination resistance, or RS485 to 9600 or 115200 BAUD. This flexibility facilitates its integration with most equipment compatible with batteries Pylontech.

Minimum consumption and long life

With a consumption of only 2 W and one Lifetime 15 years, LV-Hub hardly influences the energy balance of the installation and is designed to accompany the lithium batteries throughout his life.

Compact rack format

Their 442 mm width and 44 mm high They allow you to integrate it into a rack cabinet next to the batteries, maintaining an orderly installation and with the centralized communication wiring.

How a system is installed with LV-Hub

Topology of the system

Each group of batteries has a master battery that connects to one of the LV-Hub link ports. According to the manufacturer's schemes, each master battery is identified with a distinct configured by means of your DIP switches, and the HUB sends the joint information to inverter for Can or by Rs485.

Food and configuration

The LV-Hub works 48 VDC and has an address switch (Add), reset and LED indicators showing the status and number of groups detected, which simplifies start-up and diagnosis.

Project planning

A system of this capacity requires correctly dimensioning the power wiring, protections and power of the inverter. If you are designing an installation from scratch, you can combine the batteries with solar panels High power and choose the inverter solar adequate, or starting from one of our Solar kits.

On Tenta You will find batteries Pylontech, inverters and accessories, and in the Blog Tienda Solar You have purchase guides and technical items prepared by experts.

Frequently Asked Questions (FAQ)

1. What is LV-HUB for Pylontech?

It serves to connect Several battery groups of low voltage to the same inverter. The Hub collects the information of each group and sends it to inverter for a single link Can or Rs485, so that the assembly functions as a single battery.

2. How many batteries can I connect with an LV-Hub?

Until 5 groups, and according to the manufacturer each group admits Up to 8 US2000B Plus or US3000 modules. In total, 40 modules.

3. What communication protocol does it use with the inverter?

Can work by Canto 500 Kbps With the termination resistance of 0 or 120 Ω, or by Rs485to 9600 or 115200 BAUD. In both cases it manages up 5 groups of batteries.

4. How is each group of batteries identified?

Each group has a master battery that connects to the Hub. According to the schemes of Pylontech, each one is configured with a different address Through your DIP switches, allowing LV-Hub to distinguish groups.

5. Is US2000C, US3000C or US5000 compatible?

The technical sheet of the LV-Hub expressly mentions the models US2000B Plus and Us3000. For other models of the US series, consult with our technical team before purchase to confirm the compatibility with the Version of Hub and firmware.

6. How much do you consume and what food do you need?

The LV-Hub consumes alone 2 W and he works 48 VDC, the same nominal voltage of the battery system.

Customers who bought this product also bought: