Sungrow 5.12KWH SBS050 lithium battery
Sungrow 5.12KWH SBS050 lithium battery
Sungrow 5.12KWH SBS050 lithium battery
Sungrow 5.12KWH SBS050 lithium battery
Sungrow 5.12KWH SBS050 lithium battery
Sungrow 5.12KWH SBS050 lithium battery
Sungrow 5.12KWH SBS050 lithium battery
Sungrow 5.12KWH SBS050 lithium battery

Sungrow 5.12KWH SBS050 lithium battery

SBR3.2V114
€1,537.61
Tax included

The Sungrow SBS050 is a High voltage lithium battery with LifePO4 prismatic cells and a capacity of 5,12 kWh per module, designed for residential self-consumption systems with hybrid inverter. Your first key characteristic is the power: with a nominal tension of 102.4 V and 50 a of continuous discharge, a single module is capable of holding 5 kW output in isolated mode, with up to a 100% usable energy. The second is the modularity: admits 1 to 4 modules in parallel reached 20.48 kwh, without the need for additional connection box to expand. The third is his Simple and versatile installation: Design Plug and Play, Solo 182 mm background, Assembly on soil or wall and protection Ip55 for interior or exterior. Integrates protections against overvoltage, subtension, overcurrent and temperature, DC switch, communication Can and certifications A 38.3 and IEC 62619.

 

Detailed technical characteristics

System data

  • Type of battery: LifePO4, prismatic cell
  • Module capacity: 5,12 kWh
  • Nominal voltage: 102.4 V
  • Operating voltage range: 86.4 V – 116.8 V
  • Continuous nominal current: 30 A (Load) / 50 A (Download)
  • Maximum current: 50 A (Load) / 50 A (Download)
  • Usable energy: up to 100%
  • Power in mode isolated per module: 5 kW
  • Parallel configuration: from 1 to 4 modules (up to 20,48 kWh)
  • Indicators: SOC and state
  • Communication interface: CAN

Protections

  • Overvoltage / subtension protection: Yes
  • Protection against overcurrent: Yes
  • Overheate protection / low temperature: Yes
  • DC switch: Yes

General data

  • Dimensions (width × high × background:) 515 × 780 × 182 mm
  • Weight: 58 kg
  • Place of installation: indoor / outdoor
  • Assembly: floor support / wall
  • Operating temperature in load: 0 ° C to 55 ° C
  • Operating temperature in download: -20 ° C to 50 ° C
  • Degree of protection: IP55
  • Relative humidity Admissible: 0% – 95%, without condensation
  • Maximum performance altitude: 2000 m
  • Refrigeration: natural convection
  • Certifications: A 38.3, , IEC 62619

Benefits of the Sungrow SBS050 lithium battery

Sungrow is one of the world's largest manufacturers inverters and storage systems, and the SBS050 is its residential battery module of high voltage chemistry LFP. In front of many lithium batteries of low voltage 48 V, its architecture 102.4 V it allows to move more power with less current, which translates into less losses in the wiring and in a stronger response to high consumption.

5 kW of power with a single module

Many residential batteries of a similar capacity limit the discharge power and require installing several modules to cover the peaks of the housing. SBS050, on the other hand, admits 50 A of continuous discharge and the manufacturer indicates that a single module supports 5 kW output in isolated mode. This allows to feed the refrigerator, lighting, router or water pump during a blackout without having to ovenex dime the storage capacity.

Chemistry LIFEPO4: The safest option for home

The prismatic cells of iron and lithium phosphate (LIFEPO4) they are the reference in domestic storage for their thermal stability and his intrinsic safety. To this adds a refined battery management that supervises tension, current and temperature at all times, with protections against overvoltage, subtension, overcurrent and extreme temperatures, in addition to a dC switch integrated. Certification IEC 62619, the safety standard for lithium batteries in stationary applications, and A 38.3 for transportation support design.

Up to 100% of the ability available

Sungrow indicates that the SBS050 offers up to 100% usable energy. Unlike the aGM batteries or the gel batteries lead, they must work with partial downloads to not shorten their useful life, a LiFePO4 battery allows you to take advantage of practically all the stored energy, without maintenance and with a much lower weight per kWh.

Grow with your needs: from 5.12 to 20.48 kWh

The SBS050 is modular: you can start with a single module and expand 4 modules in parallel, reaching 10,24, , 15,36 or 20.48 kwh of total capacity. The expansion it does not require additional connection box, which simplifies installation and reduces costs when housing incorporates new consumption, such as an electric vehicle or a heat pump.

Slim design and flexible assembly

With only 182 mm background, the battery occupies very little space in garages, technical corridors or storage rooms. Can be installed on floor or wall, in indoor thanks to its protection IP55, and connects with a system Plug and play. The natural convection refrigeration it dispenses with fans, so its operation is silent.

Capacity according to the number of modules

In parallel modules Total capacity Approximate weight
1 5,12 kWh 58 kg
2 10.24 kWh 116 kg
3 15.36 kWh 174 kg
4 20.48 kwh 232 kg

The capacity and total weight are obtained by multiplying the data of a module by the number of units. To choose the appropriate capacity, the usual reference is the night-consumption from the house and the number of hours of autonomy that you want in case of blackout.

Installation and conditions of use

  • Temperature: battery load between 0 ° C and 55 ° C and download between -20 ° C and 50 ° C. In very cold exterior locations it is convenient to provide for a protected location to guarantee the load in winter.
  • Location: suitable for interior and exterior (IP55), with moisture up to the 95% without condensation and maximum altitude of 2000 m.
  • Weight: with 58 kg by module, wall installation requires a support and a marray capable of supporting the load, and handling must be performed between two people.
  • Communication: the battery communicates with the inverter for CAN. Before the installation it is essential to confirm in the official Sungrow list that the model and the version of the inverter they are compatible with SBS050.

With what equipment is the Sungrow SBS050 combined?

The SBS050 is part of a self-consumption system with storage next to one of the inverters hybrid of Sungrow compatible with its voltage range of 86.4 to 116.8 V and its communication CAN. Energy contribute it solar panels, and the inverter decide at all times whether to load the battery, cover consumption or exchange energy with the network. If you prefer a complete solution with all already dimensioned components, consult our solar kits.

Buy your Sungrow battery in Tienda Solar

On Tienda Solar we are specialists in energy storage and self-consumption for individuals and installers of Spain and Portugal, with batteries, inverters and panels of first brands and technical advice to choose the correct capacity. If you want to know how many kWh needs your home, how a battery works in mode backup or what is the difference between high and low voltage batteries, visit the Blog Tienda Solar, with purchase guides and technical items elaborated by experts.

Frequently Asked Questions (FAQ)

1. What capacity does the Sungrow SBS050 battery have?

Each module has 5,12 kWh of capacity with a nominal voltage of 102.4 V. Can be connected until 4 modules in parallel reach 20.48 kwh, without the need for additional connection box.

2. Why is a high voltage battery considered?

Because he works 102.4 V nominal, with a range of 86.4 to 116.8 V, compared to 48 or 51.2 V of the usual low voltage batteries. A greater tension allows transferring the same power with less current, which reduces losses and cable sections.

3. Can you feed the house for a blackout?

Yes, as long as the hybrid inverter have a backup function. According to Sungrow, a single module supports 5 kW output in isolated mode, thanks to his 50 A of continuous discharge. The duration of the supply depends on the consumption of the connected loads and the number of installed modules.

4. Can it be installed on the outside?

Yes. Your degree of protection IP55 it allows you to install it abroad, although a safe and sun from the sun is recommended. Keep in mind that the loading is only carried out between 0 ° C and 55 ° C, so a protected location is preferable in cold areas.

5. What advantages do you have in front of a lead battery?

Chemistry Lifepo4 it allows you to take advantage up to 100% of energy, it does not require maintenance and offers very high thermal security. Lead batteries, on the other hand, need partial discharges to preserve their useful life and are heavier by KWh stored. For simple installations without hybrid inverter, there are also the batteries Plug & Play.

6. With what inverter is it compatible?

With inverters hybrids Sungrow who admit its voltage range (86.4 to 116.8 V) and its communication CAN. Always consult the list of official compatibility of the manufacturer, as it depends on the model and the version of the inverter.

Battery Voltage (V)
+ 48
Battery Energy (kWh)
5 - 6