Only available with purchase of the Inverter
The SMA Energy Meter is a high performance meter for intelligent energy management in photovoltaic installations with equipment SMA. It stands out for its simplicity, flexibility and high performance.
Able to calculate the electrical measurement values communicated through Ethernet in the local network. The photovoltaic generation of others inverters Photovoltaic and data on network injection and acquired electricity can communicate to systems SMA With a high level of precision. The integration of SMA Energy Meter establishes an ideally coordinated system configuration that guarantees the highest performance and stability with the best cost savings and greater self-consumption.
2 year warranty.
The vatimeter SMA Energy Meter-20 is characterized by the following
- - Quick installation Plug-and-play
- - Graphic visualization of current measurement values in the Sunny Portal and in the local web interface
- - DIN rail assembly with space savings in domestic distribution thanks to its compact housing
- - Flexible use in applications> 63 thanks to external current transformers
- - Suitable for universal use regardless of the existing energy counter
- - Three-phase and bidirectional rapid reading for effective energy management
- - Ideal coordination with devices SMA to ensure that control tasks are done stably
Technical data:
|
Model |
Smart SMA
|
|
Communication
|
|
|
Connection to the local router
|
via Ethernet cable (10/100 Mbit / S, RJ45 plug)
|
|
Tickets (voltage and current)
|
|
|
Nominal voltage
|
230 V / 400 V
|
|
Frequency
|
50 Hz / ± 5%
|
|
Nominal current / limiting current by line conductor
|
5 A / 63 A (> 63 A can be connected via external current transformers)
|
|
Start-up current
|
|
|
Connecting cross section
|
10 mm² at 16 mm² 1) (for fusion of 63 a)
|
|
Couple for screw terminals
|
2.0 nm
|
|
Environmental conditions in operation
|
|
|
Room temperature
|
-25 ° C A + 40 ° C
|
|
Storage temperature range
|
-25 ° C A + 70 ° C
|
|
Protection class (according to IEC 62103)
|
II
|
|
Degree of protection (according to IEC 60529)
|
Ip2x
|
|
Maximum permissible value for relative humidity (without condensation)
|
5% to 90%
|
|
Elevation above MSL
|
0 m to 2000 m
|
|
General data
|
|
|
Dimensions (w / h / d)
|
70 mm / 88 mm / 65 mm
|
|
Upper hat rail wide units
|
4
|
|
Weight
|
0.3 kg
|
|
Location of assembly
|
Switching cabinet or meter
|
|
Type of assembly
|
Mounting on top hat rail
|
|
Danger
|
2 LED
|
|
Own consumption
|
|
|
Measurement accuracy, measuring cycle
|
1%, 1000 ms
|
|
Functions
|
|
|
Warranty
|
2 years
|
|
Certificates and permissions (most available upon request)
|
www.SMA-Solar.com
|
|
Designation of type
|
Emeter-20
|