SELF-CONSUMPTION OFF-GRID SOLAR KIT 3000 W and 6000 Whbattery per day

Solar Kit Components

Solar panel of 275 Wp to 24V (1640x990 mm) polycrystalline provides good performance in direct radiation conditions suitable for solar installations whether residential or commercial. Its polycrystalline cells also help improve performance in conditions of diffused light and high temperatures allowing a high degree of power generation throughout the year, particularly in southern Europe. Each of the modules allows easy connection to the next solar panel of the series (string) or to the cable back to the inverter (homerun) through its MC4 connectors or equivalent. Optimal balance of cost and performance for small generators that will enjoy good yield and guarantees throughout the life of your solar installation. For more technical information, refer to the panel's technical sheet if available.

Axpert VM 3K Plus solar Inverter 3000W tied to grid with 1 MPPT and 93,1% performance. The MPPT (maximum power point tracking) provides the solar inverter with the ability to identify the optimum operating point in order to maximize solar radiation at every moment of the day and year. The solar panels are connected in series with each other to subsequently connect to the inverter's input quickly using a plug and play type solar connector (usually MC4). The input voltage ranges from 24to80 V according to the different configurations. The Axpert VM 3K Plus inverter is robust, compact and being an economical option ensures more than adequate functionality of our reliable and durable residential solar installation without problems in its operation. For more technical information, refer to the inverter technical data sheet.

Batteries of lead acid BAE 5 PVS with maintenance (the levels must be checked on a regular basis) allow the energy generated by the panels to be stored when it is not consumed at the moment. Subsequently, when necessary, the batteries are discharged to feed the consumption at night time or when solar generation is not enough.This type of batteries are low in antimony, with a lifespan of up to 3150 cycles and a range of operating temperature of -20ºC - 55ºC. For more information refer to the technical sheet

Mounting structure provides the necessary fixation of the solar panels to the roof. The connection of the panels to the aluminum structure is easy and simple, providing significant savings in the time of solar installation on the roof. The solar mounting system provides superior panel performance since they are optimally oriented given the latitude of southern Europe

Specific 4mm² solar electric cable for solar installations with double insulation to be able to make the different serial or parallel connections between the solar panels and subsequently connect to the inverter's DC input. The same cable can be used if necessary to connect the panels to the charge controller (for off-grid systems). The 4mm² cable section allows the current to be transmitted efficiently without excessive voltage drops, managing the system voltage while ensuring the correct operation of the solar installation in high temperature ranges (derating).

Solar connectors (MC4) compatible with the connectors of the solar panels and the input of the inverter by means of a simple “plug and play” operation. These connectors will be used to easily crimp the solar electric cables and thus close the circuit between the output of the solar panel chains and the input of the inverter. The set consists of male / female couple / s necessary for rapid solar installation. The connector kit also comes with a metal stem so that it can be inserted into the plastic parts. Through a "click" sound we will make sure that the connectors have been connected correctly. By stretching the cable lightly, we will verify that the rod has been crimped correctly.

Technical data: