R5 SERIES 3600W 2MPPT SINGLE PHASE
R5 SERIES 3600W 2MPPT SINGLE PHASE

Inverter Solar SAJ R5 Series 3600W 2MPTPT single-phase

R5-3.6K-S2
€438.10
Tax included

The inverter SAJ R5-3.6k-s2-15 is a inverter networking single-phase of 3,68 kW with 2 independent MPPT, designed for housing whose roof combines two orientations or areas with different shadows. Admits 5400 WP of panels with 15 a maximum current per inlet (18 a short-circuit), a very broad MPPT range of 90 to 550 V and a maximum tension of 600 V, which gives great freedom when designing the chains. Delivery 3680 W a network, a power that fits with the usual limits of many single-phase facilities, with a Maximum efficiency of 98.0% and European 97.5%. Integrates DC switch, Overvoltage protections Type III In DC and AC, insulation monitoring, GFCI and DCI. Your housing Ip65 of 12.2 kg, natural refrigeration below 25 DBA and connectivity Bluetooth, Wi-Fi and app Complete a reliable team with 10 years warranty standard.

 

Detailed technical characteristics

Entrance (DC)

  • Maximum FV power: 5400 WP (STC)
  • Maximum input voltage: 600 V
  • MPPT voltage range: 90 to 550 V
  • Nominal input voltage: 360 V
  • Starting voltage: 100 V
  • Minimum input voltage: 80 V
  • Maximum input current: 15/15
  • Maximum short circuit: 18/18 A
  • MPPT number: 2
  • DC connectors by MPPT: 1/1
  • DC switch: integrated

Departure (AC)

  • Nominal output power: 3680 W
  • Maximum output power: 3680 VA
  • Nominal current (230 Vac:) 16.0
  • Maximum output current: 16.7 A
  • Nominal voltage / range: 220/230/240 V; 180 to 280 V
  • Frequency / range: 50/60 Hz; 45-55 / 55-65 Hz
  • Thdi: less than 2%
  • Power factor: 0.8 capacitive to 0.8 inductive
  • Connection: L + NO + PE

Efficiency

  • Maximum efficiency: 98.0%
  • European efficiency: 97.5%
  • MPPT efficiency: greater than 99.9%

Protections

  • Internal surge, DC insulation detection and network monitoring: integrated
  • Short AC and AC grounding detection: integrated
  • GFCI and DCI monitoring: integrated
  • DC and AC overvoltage protection: Type III
  • Thermal protection: integrated
  • Anti-isla protection: AFD

Interface

  • DC connection: MC4
  • AC connection: plug-in connector
  • Display: LED + Bluetooth / Wi-Fi + App
  • Communication ports: RS232 (USB) + RS485 (RJ45)
  • Communication mode: Wi-Fi / GPRS / 4G (optional)

General data

  • Topology: transformer
  • Night consumption: less than 0.2 W
  • Consumption in Standby: 6 W
  • Operating temperature: -40 at +60 ° C
  • Refrigeration: natural convection
  • Humidity: 0 to 100%
  • Altitude: 4000 m (reduction above 3000 m)
  • Noise: less than 25 DBA
  • Degree of protection: IP65
  • Assembly: rear panel (mural)
  • Dimensions (at x an x PR:) 389 x 367 x 143 mm
  • Weight: 12.2 kg
  • Warranty: 10 years (standard;); 15/20 / 25 years (optional)
  • Certifications: IEC 62109-1 / 2, IEC 61000-6-1 / 2/3 / 4, EN 50438, C10 / C11, IEC 62116, IEC 61727, RD 1699, UNE 206006, UNE 206007, CEI 0-21, AS 4777.2, NBR 16149, NBR 16150, VDE-AR-N 4105

Benefits Inverter SAJ R5-3.6K-S2-15

Two MPPT for real roofs

Many homes have panels in two skirts (east and west, for example) or a part of the roof affected by shadows of chimneys or trees. With 2 Independent MPPT, each group of panels works at its point of maximum power, avoiding the worst chain illuminated to penalize the other. It is a direct advantage in production against the inverters of a single entrance.

3,68 kW: A very common power in self-consumption

The power of 3680 W it is one of the most demanded in single-phase residential facilities, since it is adjusted to the typical contracted powers and the injection limits of many connection schemes. With an over-dimestone 5400 WP, the inverter expresses the production of the solar panels throughout the year.

Wide range of tension to design chains

The MPPT range of 90 to 550 V and the maximum tension of 600 V they allow mounting short or long chains according to the roof, even with a different number of panels in each MPPT. The current of 15 A perput is prepared for high power panels.

Integrated security

The team includes dC switch, protections Type III against overvoltages in DC and BC, insulation detection, , gFCI and DCI monitoring and thermal protection, reducing external components in the table.

Low consumption and silence

With a night consumption lower than 0.2 W, natural refrigeration and less 25 dBA, the inverter it is barely perceived on the day to day.

Planning an installation with R5-3.6K-S2-15

Distribution of panels between MPPT

The usual thing is to assign an orientation to each MPPT. Each entry admits 15 A and a chain, so the cast must respect the current of the panels and the maximum voltage of 600 V at the minimum temperature of the place.

Montage of the solar field

To fix panels on tilted roof, flat cover or floor, consult our structures for solar panels.

More options

If you want to incorporate storage, compare with our inverters hybrid; if you prefer other network powers, review the category of inverters networking or our solar kits. On Tienda Solar we advise you and in the Blog Tienda Solar you will find technical guides prepared by experts.

Frequently Asked Questions (FAQ)

1. Why 3.68 kW and not 4 kW?

The power of 3680 W correspond to 16 A.m. to 230 V, a reference value in many single-phase installations and connection regulations. Choosing this model facilitates adjusted to the hired power and the usual injection limits.

2. Can I put different number of panels in each MPPT?

Yes. Being Independent MPPT, each chain can have a different number of panels and orientation, as long as the 15 A per inlet and maximum tension 600 V.

3. How many panel WP do you admit?

Until 5400 WP, approximately a 147% of its nominal power, which allows to ovenex dime the solar field to produce more in winter and at times of low radiation.

4. Does it include DC switch?

Yes, the dC switch comes integrated on the team.

5. Can it be expanded with batteries?

Not directly: it is a inverter networking without battery entry. For storage you need a hybrid inverter or a battery with your own inverter coupled in AC.

6. How is production monitored?

Through Bluetooth or Wi-Fi with the app SAJ, which shows data in real time. Optionally, it supports communication GPRS or 4G

Customers who bought this product also bought: