Solar inverter SAJ R6 25kW - three phase
Solar inverter SAJ R6 25kW - three phase

Inverter networking SAJ 25kw Three-phase 3 MPPT R6-25K-T3-32

R6-25K-T2-32
€1,293.49
Tax included

The SAJ R6-25k-t3-32 is a inverter networking three-phase of 25 kW with 3 mppt, designed for self-consumption in industrial buildings, agricultural holdings, shops, hotels, neighborhood communities and high-consumption homes supply three-phase. Admits 37,500 WP photovoltaic field, a 150% of its nominal power, with 32 A per mppt and 2 Strings by MPPT, that is, Up to 16 a per string, compatible with the most current high-power panels. Your MPPT range 180 to 1000 V and the maximum tension of 1100 V They allow long chains and less wiring. Delivery 25,000 W a network with a Maximum efficiency of 98.8% and European 98.5%. Integrate protection against overvoltages Type II in DC and Type III in AC, GFCI and DCI monitoring, and Optional AFCI. With Ip65, 35.5 kg, communication Wi-Fi, Ethernet or 4G and guarantee of 5 years expandable to 25, It is a robust solution for C & I projects.

 

Detailed technical characteristics

Entrance (DC)

  • Maximum FV power: 37,500 WP (STC)
  • Maximum input voltage: 1100 V
  • MPPT voltage range: 180 to 1000 V
  • Nominal input voltage: 600 V
  • Starting voltage: 200 V
  • Maximum input current: 32/22/22 A
  • Maximum short circuit: 38.4 / 38.4 / 38.4 A
  • Strings by MPPT: 2/2/2
  • MPPT number: 3

Departure (AC)

  • Nominal output power: 25,000 W
  • Maximum apparent power: 25,000
  • Nominal current (230 Vac:) 36.3
  • Maximum output current: 41.7 A
  • Nominal voltage / range: 3L + NO + PE; 220/380, 230/400, 240/415 V; 180-280 / 312-485 V
  • Frequency / range: 50/60 Hz; 44-55 / 54-65 Hz
  • Thdi: less than 3%
  • Power factor: 0.8 capacitive to 0.8 inductive

Efficiency

  • Maximum efficiency: 98.8%
  • European efficiency: 98.5%

Protections

  • Monitoring DCI, GFCI and network: integrated
  • AC grounding detection: integrated
  • Short circuit protection: integrated
  • DC insulation resistance detection: integrated
  • DC overvoltage protection: Type II
  • AC overventions protection: Type III
  • Anti-isla protection: AFD
  • AFCI Protection: optional

Interface

  • AC connection: bornero
  • DC connection: MC4
  • Display: LED + APP (Bluetooth)
  • Communication ports: RS232 + RS485 (RJ45) + DRM (RJ45)
  • Communication: Wi-Fi / Ethernet / 4G
  • Board monitoring 24/7: optional

General data

  • Topology: transformer
  • Night consumption: less than 0.6 W
  • Operating temperature: -40 at +60 ° C
  • Refrigeration: intelligent forced ventilation
  • Humidity: 0 to 100% without condensation
  • Altitude: 4000 m (reduction above 3000 m)
  • Noise: less than 50 DBA
  • Degree of protection: IP65
  • Assembly: rear panel (mural)
  • Dimensions (at x an x PR:) 473 x 659.4 x 240 mm
  • Weight: 35.5 kg
  • Warranty: 5/10/15/20 / 25 (according to option)
  • Certifications: IEC / EN 62109-1 / 2, EN 61000-6-1 / 2/3/4, IEC 61683, IEC 60068-2, IEC 62116, IEC 61727, VDE 0126-1-1 / A1, CEI 0-21, VDE-AR-N 4105, AS / NZS 4777.2, G98 / G99, NBR 16149, NBR 16150, C10 / 11, RD 1699, UNE 206006, UNE 206007, EN 50438

Benefits Inverter SAJ R6-25K-T3-32

3 MPPT for complex covers

Industrial and agricultural covers are rarely homogeneous: ships with two waters, skylight, areas with shadows of enclosures or extensions with different orientation. With 3 Independent MPPT, the R6-25K-T3-32 allows to separate up to three groups of panels and that each one works at its optimum point, maximizing annual production.

16 A by String for high power panels

Each MPPT admits 2 strings and 32 A in total, that is, until 16 A by String. This allows you to connect without limitations solar panels bifacial and large format that dominate today the C & I market, whose current exceeds 13 A.

High voltage: long chains, less wiring

With a maximum tension of 1100 V and a MPPT range of 180 to 1000 V, long strings can be formed with many serial panels, which reduces the number of chains, the necessary cable section and the losses in direct current.

Efficiency of 98.8%

A maximum efficiency of 98.8% and european 98.5% they mean that, in a 25 kW installation, conversion losses are minimal. Throughout the useful life, every tenth efficiency translates into thousands of additional kWh.

Serial security

Overvoltage protection Type II in DC and Type III in AC comes integrated, which simplifies the Protection Table. Isolation detection, GFCI and DCI monitoring and the option of AFCI against electric arcs complete a prepared equipment for industrial use covers.

Design of an installation with SAJ R6-25K-T3-32

Orientative

Up 37,500 WP, the inverter admits, as a guidance reference, between 50 and 65 large format panels according to its unit power, distributed in until 6 strings (2 by MPPT). The exact number must be calculated with the open circuit voltage of the panels at the minimum temperature of the location.

Supply and protections

The team works in 3L + N + PE at 400 V and has a maximum output current of 41.7 A by phase, a key data to dimension the line and magnetothermal and differential protection in the table.

Assembly and options

For the deck you have structures for solar panels coplanar, inclined and floor. If you need storage, consult our inverters hybrid; if you are looking for other powers, review the category of inverters networking or the solar kits. On Tienda Solar we help you with the dimensioning and in the Blog Tienda Solar you have technical guides prepared by experts.

Frequently Asked Questions (FAQ)

1. How many panel kWP does the SAJ R6-25K-T3-32?

Until 37.5 kWp (37,500 WP), distributed in 3 MPPT with 2 strings each one, a maximum tension of 1100 V and 32 A by MPPT.

2. What does the suffix "-32" mean of the model mean?

Indicates maximum entry current by MPPT: 32 A. As each MPPT has 2 Strings, each chain supports up to 16 a, suitable value for high power panels.

3. Is it suitable for self-consumption in an industrial ship?

Yes. It's a inverter three-phase of 25 kW with 3 MPPT, Protection IP65, protections against integrated overvoltages and certifications RD 1699, UNE 206006 and UNE 206007 to legalize self-consumption facilities in Spain.

4. Does it make noise?

Used intelligent forced ventilation, with a sound level inferior to 50 dBA. It is suitable for covers, technical rooms or facades, but it is recommended not to install it together with rest areas.

5. Does it include protection against electric arcs (AFCI?)

Protection AFCI is available as optional. Overvoltage protections Type II (DC) and Type III (AC) they are integrated as standard.

6. How is it monitored?

By App SAJ by Bluetooth and with connectivity Wi-Fi, Ethernet or 4G. Optionally allows load monitoring 24/7 to analyze the consumption of the installation.

Power (kW)
20 - 29.9
Phase Type
Three-phase
Max Current Input (A)
20+