SolarEdge dual optimiser for modules up to 950W. It is a DC/DC converter that is connected to each solar module, turning them into smart modules. These optimisers increase the power output of photovoltaic systems by constantly monitoring the maximum power point (MPPT) of each individual module. In addition, the power optimisers monitor the performance of each module and communicate performance data to the SolarEdge monitoring platform for improved and cost-effective maintenance at the module level.
These optimisers are compatible with c-Si, thin-film and high-current modules.
25 year warranty.
The SolarEdge P series power optimisers offer the following features:
- - Specifically designed to work with SolarEdge residential inverters
- - Superior efficiency (99.5%)
- - Up to 25% more energy
- - Fast installation with a single bolt
- - Advanced maintenance with module-level monitoring
- - Module-level voltage shutdown for installer andfirefighter safety
- - Use with upto two PV modules connected in series or in parallel
Datasheet:
Model
|
P950
|
INPUT
|
|
Rated Input DC Power
|
950 W
|
Absolute Maximum Input Voltage (Voc)
|
125 Vdc
|
MPPT Operating Range
|
8 – 60 Vdc
|
Maximum Short Circuit Current (Isc) of Connected PV Module
|
14.1 Adc
|
Maximum Efficiency
|
99.5%
|
Weighted Efficiency
|
98.6%
|
OUTPUT DURING OPERATION
|
|
Maximum Output Curren
|
18 Adc
|
Maximum Output Voltage
|
80 Vdc
|
OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM INVERTER OR INVERTER OFF)
|
|
Safety Output Voltage per Power Optimizer
|
1 +/-0.1 Vdc
|
INSTALLATION SPECIFICATIONS
|
|
Compatible SolarEdge Inverters
|
Three phase inverters SE16K& larger
|
Maximum Allowed System Voltage
|
1000 Vdc
|
Dimensions (W x L x H)
|
129x 162 x 59 mm
|
Weight (including cables)
|
1064 gr
|
Input/Output Connector
|
MC4
|
Protection Rating
|
IP68 / NEMA6P
|