• New
Lithium battery module Solax Triple Power...
Lithium battery module Solax Triple Power...
Lithium battery module Solax Triple Power 3.1KWh T30 HV10230
Lithium battery module Solax Triple Power 3.1KWh T30 HV10230

Lithium battery module Solax Triple Power 3.1KWh T30 HV10230

85076000
€943.59
Tax included

l Solax Triple Power T30 HV10230 is a High voltage LiFePO4 lithium battery module of 102.4 V and Ah, the basic block with which Triple Power 3.0 storage systems are built SolaX. Your first key characteristic is the scalability: They are stacked with 1 to 4 modules under the same master controller Mc0600, going from 3.0 kWh to 12.2 kWh of total energy and 102.4 to 409.6 V of nominal voltage. The second is his durability, with more than 6000 cycles at 90% depth of discharge, 95% round trip efficiency and 10 years warranty. The third is his robustness: Protection Ip65 for interior and exterior and a loading range and unloading -30 ° C to 50 ° C thanks to its self-care technology with inverters SolaX Hybrid G4. Each module contributes 2.7 kWh usable, 2.5 kW nominal and 3.0 KW maximum power, and weigh 34.5 kg.

 

Detailed technical characteristics

Battery Module HV10230

  • Type of cell: LifePo4 (iron and lithium phosphate)
  • Nominal voltage: 102.4 V
  • Operating voltage range: 90 – 116 V
  • Nominal capacity: Ah
  • Total energy: 3.0 kwh (102.4 V × 30 Ah = 3.07 kWh)
  • Usable energy: 2.7 kwh (90% Dod, 0.2c at 25 ° C)
  • Nominal power: 2.5 kW
  • Maximum power: 3.0 kW
  • Recommended loading / discharge current: 25 A
  • Maximum loading / unloading current: 30 A (can vary according to the model of inverter)
  • Roundtrip Efficiency: 95%
  • Life in cycles: 6000 cycles at 90% dod
  • Expected lifespan / guarantee: 10 years
  • Dimensions (width × high × background:) 482.5 × 471.5 × 153 mm
  • Net weight: 34.5 kg

Operating conditions

  • Charging temperature range / unloading: -30 ° C to 50 ° C (heating integrated with inverter SolaX Hybrid G4)
  • Storage temperature: -20 ° C to 50 ° C (up to 3 months)
  • Relative humidity: 0 – 100%
  • Altitude: less than 3000 m
  • Degree of protection: IP65

Communication and control (through the MC0600)

  • Communication Battery – inverter: RS485 / CAN 2.0
  • Communication Battery – battery / BMS: CAN 2.0
  • Capacity indicator: 4 LED (25%, 50%, 75%, 100%)
  • Operating mode indicator: 1 LED
  • System switch: button × 1 + magnetothermal × 1
  • Master Driver MC0600: 482.5 × 173.5 × 153 mm, , 7.5 kg, admits 1 to 4 modules HV10230

Certifications

  • Rules: EC, , IEC 62619, , A 38.3, , IEC 62040, , UKCA
  • Classification of dangerous goods: Class 9

Benefits of the battery module Solax Triple Power T30

SolaX Power is one of the reference manufacturers in inverters hybrids and residential storage, and the range Triple Power 3.0 is your high-voltage battery system designed to work integrated with your own inverters hybrid. The HV10230 module is the piece that allows to dimension that system exactly tailored to each home.

High voltage architecture in series

Unlike the lithium batteries 48 v that are expanded in parallel, the triple power modules are connect in series: each HV10230 sum 102.4 V to the tension of the system, until reach 409.6 V with four modules. With the same maximum current of 30 A, the available power grows with each added module, passing from 3.0 kW to 12.2 kw of maximum power. Work at high voltage reduces currents, losses in wiring and thermal load in the inverter.

6000 cycles and 10 years warranty

Chemistry Lifepo4, considered the safest of stationary storage, allows you to overcome 6000 cycles at 90% depth of discharge, with a expected lifespan and 10 year warranty. As an indicative reference (own calculation), 6000 cycles of 2.7 kwh equivalent to more than 16,000 kWh of energy delivered throughout the life of the module, well above what the aGM batteries or traditional lead.

It works even at -30 ° C

Many lithium batteries stop charging below 0 ° C. Triple Power 3.0 incorporates a own heating technology , combined with a inverter SolaX Hybrid G4, expand the loading and discharge range until -30 ° C. Next to his protection IP65, this allows you to install it outdoors, garages without air conditioning or mountain areas without giving up performance in winter.

95% efficiency and overdrop protection

With a 95% round trip efficiency, very little energy is lost in each loading and unloading cycle. In addition, the system incorporates a automatic recharge technology that prevents the sobredescarga battery, one of the main causes of premature deterioration, and high-performance processors in the BMS for precise cell management.

Remote maintenance and complete certifications

The system allows diagnosis of failures, update and maintenance in remote, which streamlines technical support without displacement. Certification IEC 62619 (safety of stationary lithium batteries,), IEC 62040 (uninterrupted power systems,), A 38.3 (transport,), EC and UKCA.

Triple Power 3.0 System Configurations

Each system is formed by a master Driver MC0600 and between 1 and 4 modules HV10230. These are the official configurations according to the manufacturer's file:

System Modules HV10230 Nominal voltage Tension range Total energy Usable energy Nominal power Maximum power Total weight
TEE BAT-SYS-HV-3.0 1 102.4 V 90 – 116 V 3.0 kwh 2.7 kwh 2.5 kW 3.0 kW 42 kg
TEE BAT-SYS-HV-6.0 2 204.8 V 180 – 232 V 6.1 kwh 5.5 kWh 5.1 kW 6.1 kw 76.5 kg
TEE BAT-SYS-HV-9.0 3 307.2 V 270 – 348 V 9.2 kwh 8.3 kWh 7.6 kW 9.2 kw 111 kg
TEE BAT-SYS-HV-12.0 4 409.6 V 360 – 464 V 12.2 kwh 10.9 kwh 10.2 kw 12.2 kw 145.5 kg

The total weight includes the MC0600 (7.5 kg) plus the modules (34.5 kg each one) Before choosing the configuration, check that the voltage range of the resulting system is compatible with the battery input of the inverter.

How to mount the system

Design modular stack allows you to install the set on floor or wall: the MAC0600 master controller is placed on the HV10230 modules and the entire system is communicated internally by CAN 2.0, while the connection with the inverter it is done by RS485 or CAN 2.0. Take these points into account:

  • The module does not work on its own: need the master Driver MC0600, which acts as BMS of the system, integrates the switch and shows the load state.
  • Weight: each module weighs 34.5 kg, so in wall mounting we must verify the resistance of the marrow and always manipulate between two people.
  • Extension: being a serial connection, the extension changes the tension of the system; must be done respecting the manufacturer's indications and the limits of the inverter.

If you are designing an installation from scratch, you can combine the system with solar panels and a hybrid inverter SolaX, or choose one of our solar kits with all the components already sized.

Buy your battery module Solax on Tienda Solar

On Tienda Solar we are specialists in photovoltaic storage for individuals and installers Spain and Portugal, with batteries, inverters and panels of first brands and technical advice to configure each system. To learn how to dimension a battery, compare high and low voltage systems or understand the useful life of lithium batteries, visit the Blog Tienda Solar, where our experts publish purchase guides and technical items.

Frequently Asked Questions (FAQ)

1. Can I use a single HV10230 module without the MC0600?

No. The HV10230 module is a slave pack and you need the master Driver MC0600 to work. The MC0600 manages communication with the inverter, the BMS, the system switch and the LED indicators, and support 1 to 4 modules.

2. How much energy can I store with the Triple Power 3.0 system?

Since 3.0 kwh (2.7 kWh usable) with a module up 12.2 kwh (10.9 kWh usable) with four modules. The usable energy is calculated at 90% depth of discharge, at 0.2c and 25 ° C.

3. Is it compatible with inverters of other brands?

The Triple Power 3.0 system is designed for a optimized connection with inverters hybrids SolaX, and the heating function at low temperature requires a inverter SolaX Hybrid G4. For any other combination, see the list of manufacturer's compatibility.

4. Can it be installed on the outside?

Yes. Your degree of protection IP65, the admissible humidity of 0 to 100% and the operating range of -30 ° C to 50 ° C (with inverter Hybrid G4) allow you to install it abroad. Even so, it is advisable to protect it from the direct sun to prolong the useful life of the cells.

5. What is the useful life of the battery?

SolaX indicates more than 6000 cycles at 90% depth of discharge and one 10-year expected life, which coincides with the warranty period. The 95% round trip efficiency ensures that the stored energy is almost completely used.

6. What alternative exists if I do not have hybrid inverter?

The triple power system needs a hybrid inverter compatible. If your installation already has a inverter connection to network and you want to add storage without replacing it, you can assess the batteries Plug & Plaand, which connect directly to the existing installation.

Battery Voltage (V)
+ 48
Battery Energy (kWh)
3 - 4