Inversor Híbrido Monofásico SAJ 6kW HS2-6K-S2

SAJ 6KW HS2-6K-S2: Maximum monophasic residential power, backup UPS Instant Instant and Smart Kit Chint DDSU666 for surplus control

Maximizing the degree of self-consumption in single-family homes with a high index of electricity demand requires compact solutions of great capacity that do not require complex pre-installations. The system SAJ HS2 - 6K - S2 represents the highest power step within the single-phase signature series, configuring a premium design energy center that brings together inverter and storage management in a single aesthetic tower block.

16A double MPPT for high power and 100A Chint network analyzer

The inverter integrates two followers of maximum independent power capable of processing a field of solar up 9000 WP. With a maximum input current from 16 A per channel, It is fully prepared to operate with total stability along with the latest generation photovoltaic modules and large cells. This commercial pack includes the key component for housing energy automation: 100A Smart Meter Chint DDSU666 and its amperimeter clamp (CT * 1). This device permanently analyzes household flows, sending signals in milliseconds to inverter to channel photovoltaic production towards internal consumption, store the surplus in lithium modules or execute the zero injection function dynamically. If you require setting a large solar field on tile roofs or metal covers to feed this system, we suggest explore our menu of structures for aluminum of high mechanical strength.

Storage management is based on an architecture of ferrophosphate lithium batteries (LifePO4) high voltage The pre-wired interior design of the blocks eliminates the presence of exposed cable hoses, allowing a clean modular scalability from 5 kWh to 20.0 kWh of total capacity. All the intelligent management of this accumulated energy is directly supported by the options that you can acquire in our specialized section of batteries of deep cycle.

Emergency function UPS 10 ms, silent cooling and outer IP65 immunity

The continuity of supply in the house is fully armored in the face of any failure of the commercial network. Thanks to its advanced electronics, the power backup mode (back-up) activates an emergency output at a time less than or equal to 10 ms, Ensuring that critical appliances and sensitive computer devices continue to be lit without suffering annoying reboots. With a weight of 25 kg in his chassis inverter and some dimensions of 354 x 626 x 365 mm, the SAJ HS2-6K-S2 replaces the noisy traditional fans by a system of natural Convection Refrigeration, maintaining its noise emissions below the Dba. The set has a structural protection index Ip65 suitable for assembly in garages or exterior facades. If you are evaluating projects that require a rolling in industrial three-phase networks or higher size, we recommend you consult our complete offer of inverters hybrid of leading brands of the sector.

Technical specifications (model SAJ Hs2-6k-s2):

Fotovoltaic DC Contact Input (DC INPUT):

• Maximum power of the ADMPEDIC FV field: 9,000 WP a STC conditions.

• Maximum voltage of cc: 550 V.

• Range of working voltage of the MPPT: 90 V at 500 V.

• Investment boot voltage: 100 V.

• Max Entry CC: 16 a / 16 (Double independent follower).

• Maximum short circuit current: 19.2 A / 19.2 A.

• Number of MPPT regulators: 2.

Parameters of output and network connection (AC ON-GRID):

• Nominal power output: 6,000 W.

• Maximum apparent output power: 6,000 VA.

• Sustained starting nominal current: 26.1 a operating at 230 Vac.

• Maximum current of current output: 27.3 a.

• Supported electric network configuration: Single-phaseL + N + PE).

• Nominal voltage of operation CA: 220 V, 230 V, 240 V (Dynamic range of 180V to 280V).

• Total Harmonic Distortion (THDI): less than 3%.

Emergency output parameters (AC Back-up / UPS):

• Maximum output power continues in backup: 6,000 VA.

• Maximum output current in backup: 26.1 a.

• Apparent power peak supported: 7,200 VA for a maximum of 60 seconds.

• Automatic switching time (UPS Switch Time): less than or equal to 10 ms.

Battery parameters and general operation:

• Chemical technology of the accumulator: Lithium Ferrophosphate (Lifepo4).

• Range of battery bank voltage: 85 V at 450 V.

• Maximum loading and unloading: 30 a / 30 a.

• Maximum storage capacity: Expandable in Tower Up 20.0 kwh.

• Degree of environmental protection: Sealing certification Ip65.

• Physical dimensions of the module Inverter: 354 x 626 x 365 mm.

• Net weight of the module Inverter: 25 kg.

Frequently Asked Questions (FAQ)

1. What functions does the 01A Chint DDSU66 meter kit and CT * 1 included? The smart meter Chint ddsu666 it works as the dynamic system analyzer. Together with the current transformer (Ct * 1), instantly monitor the general electrical consumption of your home. Thanks to this constant reading, the inverter SAJ 6KW HS2 intelligently regulates its power to cover domestic demand in real time, stores surpluses on lithium batteries or activates the function of zero injection to avoid the pouring of energy to the commercial network.
2. How does the inverter SAJ before an unforeseen cut of light on the street? The inverter it has a backup output with technology UPS advanced who commutes in a time less or equal to 10 milliseconds (10 ms) given a blackout. This supply change is so extremely fast that it is imperceptible to household appliances. Critical charges such as lighting, refrigerator, Internet router or computers will continue to run without interruptions or uncomfortable restarts using solar energy or battery bank.
3. What is the modular pre-wiring system of the HS2 range accumulation? The HS2 series is structured under an innovative all-in-one design that is installed in compact tower format. The module inverter 6KW is placed on top and LiFePO4 lithium batteries of 5 kWh are stacked directly below. When having a design pre-wiring, Internal power and data connections are automatically performed between chassis when the blocks fit. This eliminates the outer cables on the wall and allows you expand capacity clean up to 20 kWh.
4. Is the inverter SAJ of 6KW if it is placed in an area close to coexistence? No, it is an extraordinarily silent team. Being built with a system of natural Convection Refrigeration, the device dissipates internal heat passively through its rear aluminum radiator, dispensing completely from mechanical fans. This decreases its acoustic emissions by under 35 dBA (equivalent to the background sound in a quiet library), allowing its placement in garages, corridors or residential terraces without causing sound discomfort.