The Fronius Ohmpilot 9.0-3 is a Consumption regulator for photovoltaic surpluses that derives the solar energy left over Electric Termos Resistances, Inertia Accumulators, Infrared Heating or Towellers. Its main technical advantage is the Continuous regulation from 0 to 9 kW through Modulation by pulse width (PWM), which adjusts the power to the actual surplus at any time with a Harmonic distortion THDI less than 3%. In configuration Three-phase work 3 x 230 V with Maximum input current of 3 x 16 a and Output current of 3 x 13 a, and also supports use single-phase up to 3 kW. It is integrated with all the inverters Fronius through Fronius Datamanager 2.0 and Fronius Smart, with communication WLAN, LAN or RS485. Includes anti-over, Minimum temperature setting, compatibility with Power dynamic limitation from 0 to 100% and wall mounting with protection Ip54 and only 3.9 kg.
Detailed technical characteristics
Input data
- Frequency: 50 Hz
- Maximum entry current (IAC MAX:) 16 A (single-phase) / 3 x 16 a (three-phase)
- Input voltage: 230 V (single-phase/ 3 x 230 V (three-phase with neutral)
Output data
- Maximum output power: 3 kW (single-phase) / 9 kW (three-phase), both with continuous regulation
- Frequency: 50 Hz
- Nominal output current (IAC NOM:) 13 A (single-phase/ 3 x 13 a (three-phase)
- Output voltage: 230 V (single-phase/ 3 x 230 V (three-phase with neutral)
- Harmonic distortion (THDI:) lower than 3%
General data
- Type of power regulation: modulation by pulse width (PWM)
- Dimensions (at x an x PR:) 350 x 280 x 110 mm
- Weight: 3.9 kg
- Degree of protection: IP54
- Installation: wall mount
- Ambient temperature: 0 ° C to 40 ° C
- Admissible humidity: 0% to 99%, without condensation
- Certifications and regulations: EC, AT 61000-6-2, AT 61000-6-3, AT 61000-3-2, AT 61000-3-3, EN 300 328
Integration in the system
- Inverters compatible: all the inverters Fronius
- Requirements: Fronius Datamanager 2.0 and Fronius Smart
- Datamanager integrated as standard in: Fronius Symo, Symo Hybrid, Primo, Green and Eco
- Communication with the inverter: LAN / WLAN / RS485
- Connection scheme temperature sensor: PT1000
- Additional compatibility: Fronius ENERGY PACKAGE
Benefits Fronius Ohmpilot 9.0-3
In an installation of self-consumption, each kwh poured the network is paid well below what it costs to buy it. The Ohmpilot turns that surplus in hot water or useful heat inside the house. According to Fronius, a family with a mean water consumption can cover most of its hot water with solar energy from april to october.
Continuous regulation, not steps
The relays and conventional surplus contactors only light or turn off the resistance, so they waste energy when the surplus does not reach its rated power. The ohmpilot modulate the power continuously from 0 to 9 kW with technology PWM. If your solar panels generate 1.2 kW surplus, resistance receives exactly that power and the surplus is entitled to the entire.
Network quality and EMC conformity
With a THDI of less than 3% and compliance with standards IN 61000 of electromagnetic compatibility, the ohmpilot activate consumptions in a clean and reliable way. In this way protects the network and avoids interference with other housing equipment.
Native integration with inverters Fronius
The Ohmpilot is compatible with all inverters solar Fronius. You just need a Fronius Datamanager 2.0, which is already integrated as standard in the Symo, Symo Hybrid, Primo, Galvo and Eco, and a Fronius Smart to measure the flow of energy at the connection point. Both can rear on inverters already installed.
Intelligent priorities with batteries and heat pumps
In systems with inverters hybrid and lithium batteries, the ohmpilot completes energy management and takes the surplus that is not stored or consumed. In addition, it can coordinate with other sources of heat, as gas heaters, and combine with heat pumps.
Ohmpilot Applications 9.0-3
Electric Term and Accumulators of ACS
Is your main use: control the electrical resistance of the thermo or interactor to heat the sanitary water with solar surplus. The temperature sensor PT1000 it allows controlling the temperature of the tank.
Heating inertial deposits
In housing with inertial deposit, the ohmpilot can derive up 9 kw surplus heat and reduce the use of the boiler.
Infrared heating and electric towel rails
You can also regulate infrared radiant panels and radiators towel, which expands the use of surplus beyond hot water.
Less wear of the heating system
When covering hot water with solar energy in the summer months reduces the wear of the main boiler and the cO2 emissions of housing.
Safety and Comfort Functions
- Anti-over protection: heating program for the prevention of legionella in the deposit.
- Minimum guaranteed temperature: it allows to set a minimum water temperature, although there is no solar surplus.
- Dynamic power limitation from 0 to 100%: compatible with installations with network pouring limitation, including zero pouring.
- Single start-up: the configuration is made from a specific web page and communication is by WLAN.
Installation recommendations
If you use three-phase resistances, , Fronius indicates that the neutral driver must be connected both in the input voltage and in the resistance. Also check that the strength power is consistent with the usual surplus of your installation and with the limits of 3 x 16 a of the equipment.
On Tienda Solar we help you integrate the ohmpilot into your installation Fronius or in a solar kit full. In the Blog Tienda Solar you will find guides about surplus management, aerothermia and photovoltaic, and technical advice elaborated by our experts to get the most out of your self-consumption.
Frequently Asked Questions (FAQ)
1. What exactly does the Fronius Ohmpilot?
Is a consumer regulator that detects photovoltaic surplus by Fronius Smart Meter and derives it to electrical resistances. It does it continue between 0 and 9 kW, so that the energy that is brown to the network becomes hot water or heat.
2. It works with inverters of other brands?
According to the technical sheet, the ohmpilot is compatible with all inverters Fronius and you need Fronius Datamanager 2.0 and Fronius Smart. The file does not mention compatibility with other brands.
3. Can I use it with a thermos single-phase?
Yes. In Configuration single-phase work 230 V with a maximum power of 3 kW, continuously adjustable. To take advantage of the 9 kw you need a three-phase resistance with the neutral connected.
4. Is it compatible with zero pouring facilities?
Yes. The ohmpilot is compatible with the power dynamic limitation from 0 to 100%, so you can take advantage of the over the thermos that, otherwise inverter i would have to cut.
5. Does it avoid the legionela if the water is heated only with sun?
The ohmpilot includes a legionela prevention system and allows you to fix a minimum temperature from the tank, so that the water reaches the appropriate temperatures although there are days with little surplus.
6. Can it be combined with a battery?
Yes. The ohmpilot manages the surplus that is after self-consumption, so it works with systems with storage. If you are looking for a simple storage solution and without work, you can also value the Batteries Plug & Play.