Rack Pylontech PowerCube H2 for 12 modules + 1...
Rack Pylontech PowerCube H2 for 12 modules + 1 controller

Rack Pylontech PowerCube H2 for 12 modules + 1 controller

RPH2-12
€360.58
Tax included

The rack Pylontech PowerCube H2 12 + 1 is the structure designed to mount a system of High voltage lithium battery PowerCube H2 up 12 modules H48074 and 1 controller SC1000-100S In a single tower. According to the manufacturer's card, a complete PowerCube H2 system occupies 600 x 505 x 2130 mm and admits 5 to 12 modules of 3,55 kWh each, so that a complete tower reaches, as a guidance calculation, some 42.6 kWh at a nominal tension of some 576 V. The system works with a 96% efficiency, a depth of discharge of 90% and a maximum current of loading and unloading At, and communicates with the inverter for Modbus RTU and Can. It has certifications IEC 62619, UL 1973 and CE. It is the physical basis for high capacity storage projects in large housing, businesses and C & I facilities with inverters High voltage hybrids compatible.

 

Detailed technical characteristics

Rack data

  • Product: Rack PowerCube H2
  • Maximum configuration: 12 battery modules + 1 controller
  • Compatible battery module: Pylontech H48074
  • Compatible controller: Pylontech Sc1000-100s
  • Dimensions of the complete system (an x pr x al): 600 x 505 x 2130 mm

PowerCube H2 system data

  • Number of modules: from 5 to 12
  • System capacity: 3,55 kWh x modules no
  • System tension: 48 V X Modules No.
  • Maximum load voltage: 54 V X Modules No.
  • Minimum discharge tension: 43.5 V X Modules No.
  • Standard loading / unloading current: 14.8 a
  • Load current / normal discharge: 37 a
  • Load current / maximum discharge: At
  • Efficiency: 96%
  • Depth of discharge: 90%
  • Communication: Modbus RTU / Can
  • Weight of the system: 77 kg + 32 kg per module
  • Lifetime: 10+ years
  • Operating temperature: 10 to 40 ° C
  • Storage temperature: -20 to 60 ° C
  • Humidity: 5 to 95%
  • Altitude: less than 2000 m
  • Certifications: IEC 62619, UL 1973, CE

Battery Module H48074

  • Chemistry: Lithium Ferrophosphate (LifePO4)
  • Capacity: 3,55 kWh
  • Nominal voltage: 48 V
  • Nominal capacity: 74 ah
  • Voltage range: 45 to 54 V
  • Dimensions: 442 x 390 x 132 mm
  • Weight: 32 kg
  • Communication: RS232, Can
  • Protection: Ip20
  • Certification: Un38.3

Driver SC1000-100S

  • Working tension: 200 at 1000 VDC
  • Maximum loading / unloading current: 100 a
  • Own consumption: 8 W
  • Dimensions: 442 x 390 x 132 mm
  • Weight: 8.5 kg
  • Communication: Modbus RTU / Can
  • Protection: Ip20

Benefits of the Rack Pylontech PowerCube H2 12 + 1

A tower for up to 42.6 kWh

The rack is sized for Maximum configuration of the PowerCube H2: 12 Modules H48074 and its controller. As an indicative reference, with the 12 installed modules, the system adds some 42.6 kWh of nominal capacity in a single tower 600 x 505 mm of plant, a storage density difficult to get with low voltage batteries.

Modular growth

The PowerCube H2 admits 5 to 12 modules, so the 12 + 1 rack allows you to start with the necessary capacity today and leave free hollows to expand the system later within the same furniture, without changing the structure.

High voltage, more efficiency

When connecting the modules in series, the system works at voltages of several hundred volt. This reduces the necessary current for the same power, allows lighter wiring and contributes to the 96% efficiency of the system. Is the configuration that use the inverters hybrid High voltage more common in self-consumption with storage.

Certified

The PowerCube H2 system has certifications IEC 62619 and UL 1973, international references in security lithium batteries For stationary storage, in addition to the marking EC.

Planning a PowerCube H2 system

Weight and location

The manufacturer's card indicates a weight of 77 kg plus 32 kg per module. As a guidance calculation, a complete tower with 12 modules Round 461 kg, so it must be installed on a floor capable of supporting that load, in a premises with temperature between 10 and 40 ° C and below 2000 m altitude

Choice of the number of modules

With a minimum of 5 modules (some 17.75 kWh orientative) and a maximum of 12, the system covers from large housing to small businesses. The resulting voltage must be compatible with the battery range of the inverter chosen.

Complete the installation

Combines the system with solar panels of high power and a ISolar Nversor High voltage hybrid compatible with Pylontech, or consult our Solar kits.

On Tienda Solar You will find modules, drivers and accessories Pylontech, and in the Blog Tienda Solar You have purchase guides and technical items prepared by experts.

Frequently Asked Questions (FAQ)

1. What does "12 + 1" mean?

That the rack has capacity for 12 battery modules H48074 and 1 controller SC1000-100S, the maximum configuration of the PowerCube H2 system.

2. How much capacity does a complete system reach?

Each module H48074 provides 3,55 kWh. As an indicative calculation, with 12 modules the system adds some 42.6 kWh of nominal capacity, with a depth of discharge of the 90%.

3. Can I install less than 12 modules?

Yes. The PowerCube H2 works with a minimum of 5 modules and a maximum of 12, so you can start with less capacity and expand the system later within the same rack.

4. What inverters Are they compatible?

Inverters hybrids high voltage compatible with the protocol of Pylontech for Can or Modbus RTU, whose battery voltage range is adjusted to that of the system according to the number of installed modules. Check with our technical team before purchase.

5. How much does the complete system weigh?

According to the manufacturer, 77 kg plus 32 kg for each module. With 12 modules, the total round 461 kg As a guiding calculation, so it is important to verify the resistance of the soil.

6. What certifications does the system have?

The PowerCube H2 system has certifications IEC 62619, UL 1973 and EC, and the H48074 modules have transport certification Un38.3.

Customers who bought this product also bought: