0
No products in the cart.
Solar Controller EPSolar LS1024B 12V-24V 10A
Solar regulator line LS-B from manufacturer EPSOLAR is characterized by a good finish with casing with aluminum heatsink, which protect them from high temperatures and allow use in all conditions. They are equipped with an RJ45 port allows connection to a PC (with an additional USB connector) or to a remote panel type MT-50.
It is a line of regulators particularly suitable for small installations of photovoltaic solar energy, exterior lighting, traffic signaling, monitoring, boats, etc ...
Features:
|
Model |
LS1024B |
LS2024B |
LS3024B |
|
Nominal System Voltage |
12 / 24VDC |
||
|
Rated Battery Current |
10A |
20A |
30A |
|
Maximum PV input voltage |
50V |
||
|
Grounding |
Common positive |
||
|
Self-consumption |
8.4mA(12V)，7.8mA(24V) |
||
|
Temp. compensation |
-3mV/℃/2V（25℃ ref） |
||
|
Equalize charging voltage |
Sealed: 14.6V, Flooded: 14.8V, User-defined: 9~17V |
||
|
Boost charging voltage |
Gel: 14.2V, Sealed: 14.6V, Flooded: 14.8V, User-defined: 9~17V |
||
|
Float charging voltage |
Gel /Sealed /Flooded: 13.8V, User-defined: 9~17V |
||
|
Low voltage reconnect voltage |
Gel /Sealed /Flooded: 12.6V, User-defined: 9~17V |
||
|
Low voltage disconnect voltage |
Gel /Sealed /Flooded: 11.1V, User-defined: 9~17V |
||
|
Working temp. |
-35℃~+55℃ |
||
|
Humidity |
≤95% (NC) |
||
|
Enclosure |
IP30 |
||
|
Dimension |
138.6x69.3x37mm |
159.6x81.4x47.8mm |
200.6x101.3x57mm |
|
Terminal |
4mm2 |
10mm2 |
10mm2 |
|
Net weight |
0.13kg |
0.3kg |
0.5kg |
EPSLS1024B
Specific References
16 other products in the same category:
Solar Controller EPSolar LS1024B 12V-24V 10A
Solar charge controller from EPSolar line LS-B to handle up to 10A of load from the photovoltaic modules to battery banks of 12V or 24V.