Victron SmartSolar MPPT 150/100 Solar Controller

Victron SmartSolar MPPT 150/100 Solar Controller

Victron's SmartSolar MPPT 150/100 controller is one of the most optimized regulators, both in battery charge management and in maximizing the energy extracted from the solar panel.

The dimensioning is simple, in battery systems at 12V the recommended power is 1450W, if this is exceeded the controller will limit the power to 1450W. For 24V systems this value increases to 2900W, reaching up to 5800W in 48V systems.

You can use any model of photovoltaic solar panel satisfying:

• The maximum open circuit voltage will not exceed 145V
• The short-circuit current must be at most 70A. Greater intensity could damage the controller.
• The photovoltaic voltage must be at least 5V more than the voltage of the battery to start, and 1V at least during operation.

Main features

• Battery voltage: automatic detection of 12V / 24V / 48V
• Nominal PV power: 1450W (12V), 2900W (24V), 5800W (48V)
• Nominal load current: 100A
• Size: Models Tr: 216 x 295 x 103 mm / Models MC4: 246 x 295 x 103mm
• Weight: 4.5 kg

See datasheet in DOWNLOAD section for more information.

App for mobile phone with VE.Direct port (optional).