• Online only
  • On sale!
  • -5%
Solar Inverter Victron MultiPlus-II 48/8000/110-100
Solar Inverter Victron MultiPlus-II 48/8000/110-100
Solar Inverter Victron MultiPlus-II 48/8000/110-100
Solar Inverter Victron MultiPlus-II 48/8000/110-100
Solar Inverter Victron MultiPlus-II 48/8000/110-100
Solar Inverter Victron MultiPlus-II 48/8000/110-100
Solar Inverter Victron MultiPlus-II 48/8000/110-100
Solar Inverter Victron MultiPlus-II 48/8000/110-100

Solar investor Victron Multiplus-II 48/8000 / 110-100

MPII-48/8000/110-100
€1,282.50 €1,350.00 -5%
Tax included

The inverter charger Victron Multiplus-II 48/8000 / 110-100 It is the most advanced energy management solution for 48V systems that require maximum power and versatility. With a nominal capacity of 8000VA (6400W) And an impressive 15KW power peak, this team combines the intelligence of the original multiplus with multigrid network technology. On Tienda Solar We recommend the multiplus-II for its ability to Ultra fast automatic switching (SAI function) and its total compatibility with lithium batteries. Thanks to its functions PowerControl and Powessist, this inverter Avoid overloads in limited sources (generators or network) and optimize the photovoltaic self-consumption by external current sensors. Is the key component for Hybrid investors High performance, offering total remote control and industrial reliability supported by the leading guarantee of Victron Energy.

 

Victron Multiplus-II 48/8000: Professional power and intelligent management

The Victron Multiplus-II 48/8000 / 110-100 is a multifunctional device that integrates a powerful inverter Pure sine wave, a sophisticated battery charger and a high-speed transfer switch on a single robust housing. Designed for 48V systems, this 8kVA model is ideal for housing with high consumption, nautical applications or systems of solar energy that require a critical management of the load.

Powessist and self-consumption optimized

On Tienda Solar We highlight the technology Powerassist, exclusive Victron, which allows the multiplus-II to supplement the power of a limited source (such as a generator or a port socket) with battery power when the demand exceeds the established limit. In addition, this inverter is prepared for the ESS (ENERGY STORAGE SYSTEM), allowing to optimize the use of your solar panels To prioritize self-consumption and minimize dependence on the electrical network. Its function anti-islanding Integrated complies with the strictest regulations, facilitating its use in network injection installations around the world.

Flexibility and alternating current outputs

The multiplus-II series stands out for its versatility. Has Two AC outputs: The main output has a "NO-BREAK" transfer function that assumes the supply in less than 20 milliseconds in case of blackout, protecting computers and electronic equipment. The second exit only is activated when there is AC available at the entrance, ideal for heavy loads that should not download the storage (as electric thermos). Compatible Solar investors Network and Regulators MPPT, this equipment allows you to configure and monitor the entire system remotely through the VRM portal (Victron Remote Management) using a GX device (Cerb GX or similar).

Summary technical sheet:

  • Nominal power: 8000 VA / 6400 W.

  • Power peak: 15000 W.

  • Battery voltage: 48 V.

  • Maximum load current: 110 a.

  • Switching current: 100 a.

  • Maximum efficiency: 95%.

  • Double output CA: Yes (main with SAI function).

  • Dimensions: 624 x 363 x 206 mm.

  • Weight: 42 kg.

  • Protection: Short circuit, overload, battery voltage and temperature.

Frequently Asked Questions (FAQ)

  1. What is the difference to the original multiplus multiplus-II? The multiplus-II inherits the robustness of the original model but adds a more stylized design, less consumption at rest and, most importantly, certification anti-islanding Internal to facilitate legalizations in network and self-consumption systems.
  2. Can I use this inverter with lithium batteries Pylontech or Dyness? Yes, it is fully compatible. On Tienda Solar We recommend combining it with a device GX (like the GX CERB) To establish a perfect communication via Can-Bus between the BMS of the lithium batteries and the inverter Victron.
  3. What is the powersist function? It is a function that prevents a network limiter or generator by jumping overload. If your consumption exceeds what the network can give, the multiplus-II takes the difference of the batteries to cover the demand peak instantaneously.
  4. Can I connect several multiplus-II 8000 in parallel or three-phase? No. Unlike 3KVA and 5KVA models, models of 8kva and 10kva of the multiplus-II series do not allow Parallel operation or three-phase configurations. If you need more power, you must opt for a Quattro model or units of lower power in parallel.
  5. What maintenance does this equipment require? Maintenance is null Thanks to its refrigeration by smart fans and solid state electronics. It is only recommended to periodically review the connections of the battery cables to ensure that they maintain the correct tightening torque.
Power (kW)
3 - 5.9
Compatibility list
Dyness BX51100
Dyness Power Box
Pylontech Force L2
Pylontech US2000C / US3000C / US5000
Pylontech US3000C
Pylontech US5000 / Force L2
Turbo Energy (Slim)

Customers who bought this product also bought: