• Online only
Solar regulator 20A Steca Solarix MPPT 2010...
Solar regulator 20A Steca Solarix MPPT 2010 12V-24V

Solar regulator 20A Steca Solarix MPPT 2010 12V-24V

Reg20AStecaMPPT2010
€264.99
Tax included

SOLAR CHARGE CONTROLLER 20A STECA SOLARIX MPPT 2010 12V-24V

Solar charge controller Steca 20A from Solarix MPPT line with automatic adjustment to 12V or 24V systems. Highly efficient controller with maximum power point monitoring technology (MPPT), especially suitable for use with panels normally used for grid connection.

 

SOLAR CHARGE CONTROLLER 20A STECA SOLARIX MPPT 2010 12V-24V

The Steca regulators of the Solarix MPPT line have the latest technology to guarantee full power under all conditions of use, as well as optimal and professional care of the battery pack, all with a modern finish and outstanding protection functions.

The Steca Solarix MPPT 2010 model allows you to power the batteries with up to 20A of load current and the loads of consumption in DC with up to 10A.

 

Solarix MPPT 2010

Operating performance

System voltage

12 V (24 V)

Nominal power

250 W (500 W)

Max. DC-DC efficiency

> 98 %

Own consumption

10 mA

DC input side

MPP voltage

15 V (30 V) < Vmodule<< 100 V

Open circuit voltage solar module (at minimum operating temperature)

**17 V ... 100 V (34 V … 100 V)

Module current

18 A

DC output side

Battery Charge current

20 A

Load current

10 A

End-of-charge voltage

13,9 V (27,8 V)*

Boost charge voltage

14,4 V (28,8 V)*

Equalisation charge

14,7 V (29,4 V)*

Reconnection voltage (LVR)

12,5 V (25 V)*

Deep discharge protection (LVD)

11,5 V (23 V)*

Operating conditions

Ambient temperature

-25 °C … +40 °C

Fitting and construction

Terminal (fine / single wire)

16 mm2 / 25 mm2 - AWG 6 / 4

Degree of protection

IP 32

Dimensions (X x Y x Z)

187 x 153 x 68 mm

Weight

aprox. 900 g

* see manual

**CAUTION: If an open circuit voltage of more than 75 V or 100 V is supplied to the connected solar module, the controller will be destroyed. When selecting the solarmodule, it is important to bear in mind that the open circuit voltage should never exceed 75 V or 100 V over the entire working temperature range. When using solar modules with a maximum open circuit voltage of between 60 and 100 V (over the entire temperature range), all installation steps must be carried in accordance with protection class II.

 

All product reviews comply with DIRECTIVE (EU) 2019/2161