Solar inverter SolarEdge StorEdge HD-Wave 6.0kW
  • Solar inverter SolarEdge StorEdge HD-Wave 6.0kW

Solar inverter SolarEdge StorEdge HD-Wave 6.0kW

StorEdge 6000W single-phase inverter with HD-Wave technology and SetApp configuration. It has an efficiency of 99% and a maximum input current of 16.5 A. StorEdge stands out for its efficiency, reliability, simplicity and easy installation.

The design of this inverter works in such a way that if it is disconnected, it collects power from all the optimisers at a safe low voltage so that there is no danger of electrocution and work without problems. This power management, unlike classic grid connection systems in which all the panels are in a single series, the performance of each panel does not influence those connected to the same inverter, but they contribute the energy captured by each one of them.

12-year warranty.

The StorEdge family of solar inverters is characterized by the following features:

  • - Simple installation and inventory management.
  • - High reliability and efficiency.
  • - A single inverter manages PV, self-consumption and battery power.
  • - Allows connection of batteries from suppliers such as LG Chem RESU.
  • - Integrated module level monitoring.
  • - Designed to remove DC voltage and current during installation, maintenance or fire suppression.
  • - Fixed voltage inverter for longer strings.
  • - Outdoor and indoor installation.

Datasheet:

Model

SE6000H

OUTPUT

 

Rated AC Power Output

6000VA

Maximum AC Power Output

6000VA

AC Output Voltage (Nominal)

220 / 230 Vac

AC Output Voltage Range

184 - 264.5 Vac

AC Frequency (Nominal)

50/60 ± 5 Hz

Maximum Continuous Output Current

27.5 A

Total Harmonic Distortion (THD)

<3 %

Power Factor

1, adjustable -0.9 to 0.9

Utility Monitoring, Islanding Protection, Configurable Power Factor, Country Configurable Thresholds

Yes

Charge Battery from AC

Yes

INPUT (PV)

 

Maximum DC Power

12000 W

Transformer-less, Ungrounded

Yes

Maximum Input Voltage

480 Vdc

Nominal DC Input Voltage

380  Vdc

Maximum Input Current

16.5  Adc

Reverse-Polarity Protection

Yes

Ground-Fault Isolation Detection

                           600 kΩ                          

Maximum Inverter Efficiency

99.2 %

European Weighted Efficiency

99 %

INPUT (BATTERY)

 

Compatible Batteries

LG Chem RESU7H, LG Chem RESU10H, LG Chem RESU10H Prime, LG Chem RESU16H Prime

Number of Batteries per Inverter

Single LG Chem RESU7H or RESU10H Two LG Chem RESU10H or RESU16H Prime batteries

Maximum Continuous Battery Charge and Discharge

5000 W

Max Input Voltage

480 Vdc

Max Continuous Current

14 Adc

STANDARD COMPLIANCE

 

Safety

IEC-62109-1/2, AS-3100

Grid Connection Standards

IEC61727, IEC62116, EN 50438, VDE-AR-N-4105, VDE 0126-1-1, UTE_C_15-712, G83/2, G59/3, CEI-021, ÖNORM, TF3.2.1, C10-11, NRS 097-2-1

Emissions

IEC61000-6-2, IEC61000-6-3, IEC61000-3-11, IEC61000-3-12, FCC Part 15 Class B

INSTALLATION SPECIFICATIONS

 

AC Output - Supported Cable Diameter

9-16 mm

AC - Supported Wire Cross Section

1-10 mm^2

DC Input (PV)

1 x MC4

Battery Input

1 x MC4

Dimensions (H x W x D) with StorEdge Interface

450 x 370 x 174 mm

Noise

< 25 dBA

Weight

10 kg

Cooling

Natural Convection

Operating Temperature Range

-40 to +60 C

Protection Rating

IP65 — Outdoor and Indoor

SE6000H-RWS00BNO4

Data sheet

Power (kW)
6 - 9.9
Phase Type
Single phase
Max Current Input (A)
16 - 16.99
Compatibility list
LG RESU

Specific References

Download

Ficha técnica

Download (303.39KB)

Manual

Solaredge_StorEdge_Manual

Download (1.42MB)

Garantia

Solaredge_Warranty

Download (670.12KB)