Victron SmartSolar MPPT 75/10 Solar Controller
  • Victron BlueSolar MPPT 75/10 Solar Controller
  • Victron SmartSolar MPPT 250/85 Solar Controller

Victron SmartSolar MPPT 75/10 Solar Controller

In stock

Victron SmartSolar MPPT 75/10 Solar Controller

Victron solar charge MPPT controller for 12V or 24V. Victron's ultra-fast tracking of maximum power point achieves up to 30% more power than conventional controllers. For 145W solar panels in 12V and up to 290W systems in 24V systems. Available in two different PV input plug in.

Connector

Victron SmartSolar MPPT 75/10 Solar Controller

Victron's SmartSolar MPPT 75/10 controller is one of the most optimized regulators, both in battery charge management and in maximizing the energy extracted from the solar panel.

The dimensioning is simple, in battery systems at 12V the recommended power is 145W, if this is exceeded the controller will limit the power to 145W. For 24V systems this value increases to 290W.

You can use any model of photovoltaic solar panel satisfying:

  • The maximum open circuit voltage will not exceed 70V
  • The short-circuit current must be at most 13A. Greater intensity could damage the controller.
  • The photovoltaic voltage must be at least 5V more than the voltage of the battery to start, and 1V at least during operation.

Main features

  • Battery voltage: automatic detection of 12V / 24V
  • Nominal PV power: 145W (12V), 290W (24V)
  • Nominal load current: 13A
  • Size: 100 x 113 x 40 mm
  • Weight: 0.5 kg

See datasheet in DOWNLOAD section for more information.

App for mobile phone with VE.Direct port (optional).

SS-MPPT-250/85-MC4

Specific References

EAN13
8719076050896

Download

Datasheet

Victron SmartSolar 75/10-100/20 Datasheet

Download (277.01KB)