0
No products in the cart.
Victron SmartSolar MPPT 100/50 Solar Controller
In stock
Victron SmartSolar MPPT 100/50 Solar Controller
Victron solar charge MPPT controller for 12V or 24V. Victron's ultra-fast tracking of maximum power point achieves up to 30% more power than conventional controllers. For 700W solar panels in 12V and up to 1400W systems in 24V systems. Available in two different PV input plug in.
€315.08
21% IVA incluido
Victron SmartSolar MPPT 100/50 Solar Controller
Victron's SmartSolar MPPT 100/50 controller is one of the most optimized regulators, both in battery charge management and in maximizing the energy extracted from the solar panel.
The dimensioning is simple, in battery systems at 12V the recommended power is 700W, if this is exceeded the controller will limit the power to 700W. For 24V systems this value increases to 1400W.
You can use any model of photovoltaic solar panel satisfying:
- The maximum open circuit voltage will not exceed 95V
- The short-circuit current must be at most 60A. Greater intensity could damage the controller.
- The photovoltaic voltage must be at least 5V more than the voltage of the battery to start, and 1V at least during operation.
Main features
- Battery voltage: automatic detection of 12V / 24V
- Nominal PV power: 700W (12V), 1400W (24V)
- Nominal load current: 50A
- Size: 130 x 186 x 70 mm
- Weight: 1.3 kg
See datasheet in DOWNLOAD section for more information.
App for mobile phone with VE.Direct port (optional).
SS-MPPT-250/85-MC4
Specific References
- EAN13
- 8719076050896
16 other products in the same category:
In stock
Victron SmartSolar MPPT 100/50 Solar Controller
Victron solar charge MPPT controller for 12V or 24V. Victron's ultra-fast tracking of maximum power point achieves up to 30% more power than conventional controllers. For 700W solar panels in 12V and up to 1400W systems in 24V systems. Available in two different PV input plug in.