Goodwe 3048-EM single-phase grid-tie hybrid solar inverter that allows charging of solar batteries either through the solar panels or from the grid. The GoodWe 3000W AC model allows to connect 3900W of solar panel power with a maximum input voltage of 500V and maximum current of 11A.
This solar inverter is compatible with 48V batteries such as the Pylontech US2000 and US3000 or other lithium batteries of the same nominal voltage, its MPPT allow the optimization of the energy produced by the solar panels either for self-consumption or to charge the solar batteries.
The GoodWe GW5048-EM inverter has an efficiency of 97.7% and a product warranty of 5 years. High quality hybrid inverter compatible with 48V lithium batteries.
The GoodWe GW3048 is a hybrid solar inverter with 1 MPPT with input ready to connect 1 strings, with a maximum input current of 11A per string, with an operating voltage per MPPT between 280 to 500V per MPPT. This efficient inverter allows for easy installation in both residential and industrial areas.
One of the great advantages of the GW3048 inverter is that it is compatible with the vast majority of 48V lithium batteries, avoiding the use of high voltage batteries, which makes it easy to install and commission the inverter-battery system.
The GoodWe has a WiFi module that allows the monitoring of the production of the solar installation through the SEMS platform in the cloud that facilitates connectivity through any mobile device.
The GoodWe GW3048 single-phase inverter is only available for those self-consumption solar installations with grid connection that want to use 48V lithium solar batteries.
This inverter can be connected to the GoodWe Wattmeter to be able to monitor home consumption either from the grid or from the photovoltaic system.
The GoodWe hybrid series is undoubtedly a great value for money option recommended from Tienda Solar
In the following link you may see the accessories supplied with the product: https://drive.google.com/file/d/1Ff2LdriFav_-nDAu3yWzJ746g6_ACbiQ/view?usp=sharing.
Model |
GW3048-EM |
INPUT (DC) |
|
Max. PV array power (Wp)
|
3900 |
Max. DC Voltage (V) |
500 |
DC nominal Voltage (V) |
360 |
Max. input current (A) |
11 |
Max.shortcircuit current (A) |
13,8 |
Volatge range per MPPT (V) |
280-500 |
Start operating voltage (V) |
150 |
Number of MPPT trackers |
1 |
Number of strings per MPPT |
1 |
OUTPUT (AC) |
|
Nominal AC Power (VA) |
3000 |
Max. AC Power (VA) |
3000 |
Nominal Grid Voltage (AC) (V) |
220 |
Nominal frequency (Hz) |
50/60 |
Nominal AC current (A) |
18,8 |
Max. AC current (A) |
23,6 |
Power factor |
0.8 leading – 0.8 lagging |
THDi, power ratio (%) |
<2 |
DC OUTPUT (BATTERY) |
|
Operating Voltage (V) |
48V |
Battery recommended voltage (V) |
48V |
Max charge/discharge current (A) |
50A |
Battery Communication |
CAN/RS485
|
Protection against reverse connection |
YES |
PROTECTION |
|
Overvoltage protection |
YES |
Over current protection |
YES |
Monitoring of impedance DC |
YES |
Ground fault detectoin |
YES |
Grid injection monitoring |
YES |
Protection of RCD |
YES |
Safety |
IEC62109-1/-2 |
EMC |
EN61000-6-1; EN61000-6-3; EN61000-3-2; EN61000-3-3 |
Certificates |
G98; AS4777; VDE4105; EN50549; CE10-21 |
ENVIRONMENTAL |
|
Protection degree (IEC60529) |
IP65 |
Operating Temperature (ºC) |
-25; +60 (derating at 45) |
Max. altitude (m) |
<2000 |
Humidity (%) |
0-100 (non-condensation) |
DIMENSIONS AND WEIGHT |
|
Dimensions (WxHxD) (mm) |
347 X 432 X 175 |
Weight (Kg) |
16 |
Ventilation |
Natural |
Typology |
Non-isolated |
Interface de comunication |
WiFi / RS485 |
LCD display |
Yes |
Warranty (years) |
5 |
- Power (kW)
- 3 - 5.9
- Phase Type
- Single phase
- Max Current Input (A)
- 11 - 11.99
- Compatibility list
- Dyness BX51100
Dyness Power Box
Pylontech Force L2
Pylontech US2000C / US3000C / US5000
Pylontech US3000C
Pylontech US5000 / Force L2
Turbo Energy (Slim)