0
No products in the cart.
Hybrid Inverter GoodWe GW8K-ET three phase
GoodWe 8000W 48V three-phase hybrid inverter with SetApp configuration. It has an efficiency of 98.2% and a maximum input current of 12.5A. This inverter group stands out for its efficiency, energy management and easy installation.
This hybrid inverter has a three-phase emergency power output with three-phase current. This inverter leaves nothing to be desired thanks to the high voltage battery connection and together with 2 independent MPP trackers. This device is configured up to date via the app and sends its data to the free GoodWe SEMS portal via the integrated WiFi interface. Includes a three-phase smart meter with folding current transformers.
5-year warranty.
€1,942.12
21% IVA incluido
GoodWe ET series is characterised by the following features:
- - Peak shaving: Intelligent battery charging management, the GoodWe acts as an intelligent power management system, it can be programmed to charge from the grid when the electricity price is cheaper and use the power during peak hours.
- - Powering critical loads: small appliances such as refrigerators, routers, lamps, computers and other household appliances can be connected to the inverter's back-up power supply. When the grid is down, the system connects to the back-up power source within milliseconds.
- - Increased self-consumption: during sunrise and sunset the electrical energy produced by the solar panels optimises the household's self-consumption, the surplus is used to charge the batteries and can be used when needed, at night or when there is no photovoltaic production.
- - They have an integrated Uninterruptible Power Supply (UPS) function.
- - Lightweight design of only 25Kg.
In the following link you may see the accessories supplied with the product: https://drive.google.com/file/d/1Ff2LdriFav_-nDAu3yWzJ746g6_ACbiQ/view?usp=sharing.
Datasheet:
|
Model
|
GW8K-ET
|
|
Battery input data
|
|
|
Battery Type
|
Lithium-ion
|
|
Battery voltage range (V)
|
180~600
|
|
Max. charging current (A
|
25
|
|
Max. discharge current (A)
|
25
|
|
Charging strategy for lithium-ion battery
|
Self-adaptation to BMS
|
|
PV string input data
|
|
|
Max. DC input power (W)
|
9600
|
|
Max. DC input voltage (V)
|
1000
|
|
MPPT Range (V)
|
380~850
|
|
Starting voltage (V)
|
180
|
|
Minimum Supply Voltage (V)
|
210
|
|
Full load MPPT range (V)
|
240~850
|
|
Nominal input voltage DC (V)
|
620
|
|
Max. input current (A)
|
12.5/12.5
|
|
Max. short circuit current (A)
|
12.5/12.5
|
|
No. of MPP trackers
|
2
|
|
AC output data
|
|
|
Apparent nominal output power to the grid (VA)
|
8000
|
|
Max apparent power output to the grid (VA)
|
8800
|
|
Max. apparent power from the grid (VA)
|
15000
|
|
Rated output voltage (V)
|
400/380, 3L/N/PE
|
|
Nominal output frequency (Hz)
|
50/60
|
|
Max AC output current to the grid (A)
|
13.5
|
|
Max AC current from the mains (A)
|
22.7
|
|
Output power factor
|
~1 (Adjustable from 0.8 conductive to 0.8 inductive)
|
|
THDi output (In nominal output)
|
>3%
|
|
Efficiency
|
|
|
Max. efficiency
|
98.2%
|
|
Max. battery efficiency on charge
|
97.5%
|
|
Euro efficiency
|
97.2%
|
|
General data
|
|
|
Operating temp. range (°C)
|
-35~60
|
|
Relative humidity
|
0~95%
|
|
Operating altitude (m)
|
≤4000
|
|
Noise (dB)
|
<30
|
|
Weight (kg)
|
24
|
|
Size (width*height*length mm)
|
415*516*180
|
|
Degree of protection
|
IP66
|
|
Self-consumption at rest (W)
|
<15
|
|
Topology
|
No transformer
|
GW8K-ET
Data sheet
- Power (kW)
- 6 - 9.9
- Phase Type
- Three-phase
- Max Current Input (A)
- 12 - 12.99
- Compatibility list
- BYD HVS / HVM
- Compatibility list
- Dyness Tower T7 / T10 / T14 / T17 / T21
Specific References
16 other products in the same category:
Inverter Outback GVFX3048E 3000W, 48Vdc 220 AC, 40A charger, grid connection available
€1,666.51
-36%
€2,603.92
GoodWe 8000W 48V three-phase hybrid inverter with SetApp configuration. It has an efficiency of 98.2% and a maximum input current of 12.5A. This inverter group stands out for its efficiency, energy management and easy installation.
This hybrid inverter has a three-phase emergency power output with three-phase current. This inverter leaves nothing to be desired thanks to the high voltage battery connection and together with 2 independent MPP trackers. This device is configured up to date via the app and sends its data to the free GoodWe SEMS portal via the integrated WiFi interface. Includes a three-phase smart meter with folding current transformers.
5-year warranty.