Solar inverter SolarEdge StorEdge HD-Wave 3.0kW
  • Solar inverter SolarEdge StorEdge HD-Wave 3.0kW

Solar inverter SolarEdge StorEdge HD-Wave 3.0kW

StorEdge single-phase inverter of 3000W with HD-Wave technology and SetApp configuration. It has an efficiency of 98.8% and a maximum input current of 9A. The StorEdge line stands out for its efficiency, reliability, simplicity and easy installation.

The design of this inverter works in such a way that if it is disconnected, it collects power from all the optimisers at a safe low voltage so that there is no danger of electrocution and work without problems. This power management, unlike classic grid connection systems in which all the panels are in a single series, the performance of each panel does not influence those connected to the same inverter, but they contribute the energy captured by each one of them.

12-year warranty.

The StorEdge family of solar inverters is characterized by the following features:

  • - Simple installation and inventory management.
  • - High reliability and efficiency.
  • - A single inverter manages PV, self-consumption and battery power.
  • - Allows connection of batteries from suppliers such as LG Chem RESU.
  • - Integrated module level monitoring.
  • - Designed to remove DC voltage and current during installation, maintenance or fire suppression.
  • - Fixed voltage inverter for longer strings.
  • - Outdoor and indoor installation.

Datasheet:

Model

SE3000H

OUTPUT

 

Rated AC Power Output

3000

Maximum AC Power Output

3000

AC Output Voltage (Nominal)

220 / 230

AC Output Voltage Range

184 - 264.5

AC Frequency (Nominal)

50/60 ± 5

Maximum Continuous Output Current

14

Total Harmonic Distortion (THD)

<3

Power Factor

1, adjustable -0.9 to 0.9

Utility Monitoring, Islanding Protection, Configurable Power Factor, Country Configurable Thresholds

Yes

Charge Battery from AC

Yes

INPUT (PV)

 

Maximum DC Power

6000

Transformer-less, Ungrounded

Yes

Maximum Input Voltage

480

Nominal DC Input Voltage

380

Maximum Input Current

9

Reverse-Polarity Protection

Yes

Ground-Fault Isolation Detection

600

Maximum Inverter Efficiency

99.2

European Weighted Efficiency

98.8

INPUT (BATTERY)

 

Compatible Batteries

LG Chem RESU7H, LG Chem RESU10H, LG Chem RESU10H Prime, LG Chem RESU16H Prime

Number of Batteries per Inverter

Single LG Chem RESU7H or RESU10H Two LG Chem RESU10H or RESU16H Prime batteries

Maximum Continuous Battery Charge and Discharge

5000

Max Input Voltage

480

Max Continuous Current

14

STANDARD COMPLIANCE

 

Safety

IEC-62109-1/2, AS-3100

Grid Connection Standards

IEC61727, IEC62116, EN 50438, VDE-AR-N-4105, VDE 0126-1-1, UTE_C_15-712, G83/2, G59/3, CEI-021, ÖNORM, TF3.2.1, C10-11, NRS 097-2-1

Emissions

IEC61000-6-2, IEC61000-6-3, IEC61000-3-11, IEC61000-3-12, FCC Part 15 Class B

INSTALLATION SPECIFICATIONS

 

AC Output - Supported Cable Diameter

9-16

AC - Supported Wire Cross Section

1-10

DC Input (PV)

1 x MC4

Battery Input

1 x MC4

Dimensions (H x W x D) with StorEdge Interface

450 x 370 x 174

Noise

< 25

Weight

10

Cooling

Natural Convection

Operating Temperature Range

-40 to +60

Protection Rating

IP65 — Outdoor and Indoor

SE3000H-RWS00BNO4

Data sheet

Power (kW)
3 - 5.9
Phase Type
Single phase
Max Current Input (A)
10-
Compatibility list
LG RESU

Specific References

Download

Ficha técnica

Download (303.39KB)