Solar Inverter GoodWe GW20K-DT Three-Phase
Goodwe 20000W three-phase solar inverter with SetApp configuration, specially designed for self-consumption installations without battery. It is part of the DT series, so it includes 2 MPPT solar trackers, which makes it ideal for installations with panels oriented in different directions. Thanks to its reliable grid support capability, high degree of protection against water and dust and wide voltage range it is suitable for commercial and industrial rooftop and small to medium sized systems.
The GoodWe solar inverters of the DT series are recognized for the following features:
- They cover a high power range.
- 5-inch LCD front display.
- Export control.
- 30% photovoltaic oversizing.
- 30% lighter.
- IP65 protection which provides watertightness against humidity and dust, and allows to be installed inside or outside the house.
- Lightweight design of only 39 Kg.
Technical datasheet:
|
Model
|
GW20K-DT
|
|
PV Input Data |
|
|
Max. DC input power (W)
|
26000
|
|
Max. DC input voltage (V)
|
1000
|
|
MPPT Range (V)
|
260~850
|
|
Starting voltage (V)
|
250
|
|
Full load MPPT range (V)
|
470~850
|
|
Nominal input voltage DC (V)
|
620
|
|
Max. input current (A)
|
22/22
|
|
Max. short circuit current (A)
|
27.5/27.5
|
|
No. of MPP trackers |
2 |
|
No. of imput strings per tracker
|
2 |
|
AC output data
|
|
|
Nominal output power to the grid (VA)
|
20000
|
|
Max apparent power output to the grid (VA)
|
20000
|
|
Rated output voltage (V)
|
400, 3L/N/PE
|
|
Nominal output frequency (Hz)
|
50/60
|
|
Max AC output current to the grid (A) |
30
|
|
Output power factor
|
~1 (Adjustable from 0.8 conductive to 0.8 inductive)
|
|
THDi output (In nominal output)
|
>1.5%
|
|
Efficiency
|
|
|
Max. efficiency
|
98.4%
|
|
Euro efficiency
|
98.1%
|
|
General data
|
|
|
Operating temp. range (°C)
|
-25~60
|
|
Relative humidity
|
0~100%
|
|
Operating altitude (m)
|
≤4000
|
|
Noise (dB)
|
<45
|
|
Weight (kg)
|
39
|
|
Size (width*height*length mm)
|
516*650*203
|
|
Degree of protection
|
IP65
|
|
Self-consumption at rest (W) Datasheet: |
<1
|
|
Topology
|
Transformerless
|
GW20K-DT
Data sheet
- Power (kW)
- 20 - 29.9
- Phase Type
- Three-phase
- Max Current Input (A)
- 20+
- Inverter Type
- Not hybrid
Specific References
16 other products in the same category:
Goodwe 20000W three-phase solar inverter with SetApp configuration, specially designed for self-consumption installations without battery. It is part of the DT series, so it includes 2 MPPT solar trackers, which makes it ideal for installations with panels oriented in different directions. Thanks to its reliable grid support capability, high degree of protection against water and dust and wide voltage range it is suitable for commercial and industrial rooftop and small to medium sized systems.