- Online only
- On sale!
In stock
Victron BlueSolar MPPT 150/45 Solar Controller
Victron solar charge MPPT controller for 12V, 24V or 48V systems. Victron's ultra-fast tracking of maximum power point achieves up to 30% more power than conventional controllers. For 650W solar panesl in 12V and up to 2600W systems in 48V systems. Available in two different PV input plug in.
Victron BlueSolar MPPT 150/45 Solar Controller
Victron's BlueSolar MPPT 150/45 controller is one of the most optimized regulators, both in battery charge management and in maximizing the energy extracted from the solar panel.
The dimensioning is simple, in battery systems at 12V the recommended power is 650W, if this is exceeded the controller will limit the power to 650W. For 24V systems this value increases to 1300W, reaching up to 2600W in 48V systems.
You can use any model of photovoltaic solar panel satisfying:
- The maximum open circuit voltage will not exceed 145V
- The short-circuit current must be at most 50A. Greater intensity could damage the controller.
- The photovoltaic voltage must be at least 5V more than the voltage of the battery to start, and 1V at least during operation.
Main features
- Battery voltage: automatic detection of 12V / 24V / 48V
- Nominal PV power: 650W (12V), 1300W (24V), 2600W (48V)
- Nominal load current: 45A
- Size: Models Tr: 185 x 250 x 95mm /Models MC4: 215 x 250 x 95mm
- Weight: 3 kg
See datasheet in DOWNLOAD section for more information.
App for mobile phone with VE.Direct port (optional).