Victron BlueSolar MPPT 100/30 Solar Controller

Victron BlueSolar MPPT 100/30 Solar Controller

Victron's BlueSolar MPPT 100/30 controller is one of the most optimized regulators, both in battery charge management and in maximizing the energy extracted from the solar panel.

The dimensioning is simple, in battery systems at 12V the recommended power is 440W, if this is exceeded the controller will limit the power to 440W. For 24V systems this value increases to 880W.

You can use any model of photovoltaic solar panel satisfying:

• The maximum open circuit voltage will not exceed 100V
• The short-circuit current must be at most 35A. Greater intensity could damage the controller.
• The photovoltaic voltage must be at least 5V more than the voltage of the battery to start, and 1V at least during operation.

Main features

• Battery voltage: automatic detection of 12V / 24V
• Nominal PV power: 440W (12V), 880W (24V)
• Nominal load current: 30A
• Size: 130 x 186 x 70 mm
• Weight: 1.3 kg

See datasheet in DOWNLOAD section for more information.

App for mobile phone with VE.Direct port (optional).