Victron BlueSolar MPPT 100/20 Solar Controller
In stock
Victron BlueSolar MPPT 100/20 Solar Controller
Victron MPPT solar charge controller for 12V, 24 or 48V systems. Victron's ultra-fast maximum power point tracking achieves up to 30% more power than conventional controllers. For 290W of solar panel in 12V systems, 580W in 24V systems and 1160W in 48V systems.
Victron BlueSolar MPPT 100/20 Solar Controller
The BlueSolar MPPT 100/20 controller from Victron is one of the most optimized controllers, both in the management of the battery charge and in the maximization of the energy extracted from the solar panel.
The sizing is simple, in 12V battery systems the recommended power is 290W, if this is exceeded the controller will limit the power to 290W. For 24V systems this value increases to 580W and for 48V systems it increases to 1160W.
Any model of photovoltaic solar panel can be used with respect:
- The maximum open circuit voltage shall not exceed 100V.
- The short-circuit current must be a maximum of 20A. A higher current could damage the controller.
- The photovoltaic voltage must be at least 5V higher than the battery voltage to start up, and 1V higher at least during operation.
Main features
- Battery voltage: automatic detection of 12V / 24V / 48V
- Nominal PV power: 290W (12V), 580W (24V), 1160W (48V)
- Nominal load current: 20A
- Size: 100 x 113 x 60 mm
- Weight: 0.65 kg
See datasheet in DOWNLOAD section for more information.
App for mobile phone with VE.Direct port (optional).
BS-MPPT-100/20
Specific References
16 other products in the same category:
In stock
Victron BlueSolar MPPT 100/20 Solar Controller
Victron MPPT solar charge controller for 12V, 24 or 48V systems. Victron's ultra-fast maximum power point tracking achieves up to 30% more power than conventional controllers. For 290W of solar panel in 12V systems, 580W in 24V systems and 1160W in 48V systems.