0
No products in the cart.
Solar Inverter Solax X1 – Mini – 1.5 – S
Perfect single-phase grid connected photovoltaic inverter, for places with limited footprint, since the X1 - Mini – 2.0 - S reaches up to 96,5% efficiency with a very compact design and reduced dimensions. The power output can reach up to 1500W AC, being optimization by 1 MPPT. It has been designed to plug-in up to a maximum input current of 12A and a voltage of 230V, additionally it starts with low voltages from 65V. It is equipped with convection cooling, with a standby energy consumption lower than 1W. This small inverter also includes protections against over-currents, overloads, DC insulation impedance monitoring, ground fault monitoring, DC injection monitoring and RCD protection and high temperatures.
€372.03
€342.27
Save 8%
21% IVA incluido
Product warranty offered ranges from 5 to 10 years, with CE certificate. The connection of this equipment with the solar panel arrays is very simple and could be installed both indoors and outdoors as it enjoys IP65 insulation.
|
Model
|
X1 – 1.5 – S |
|
INPUT (DC) |
|
|
Max. PV array power (Wp)
|
2550 |
|
Max. DC Voltage (V)
|
400 |
|
Nominal DC operating voltage (V)
|
360 |
|
Max. input current (A)
|
12 |
|
Max. short circuit current (A)
|
14 |
|
MPPT voltage range (V)
|
55-380 |
|
Start operating voltage (V)
|
70 |
|
No. of MPP trackers
|
1 |
|
Strings per MPP Tracker
|
1 |
|
OUTPUT (AC) |
|
|
Nominal AC power (VA)
|
1500
|
|
Max. AC power (VA)
|
1650 |
|
Nominal grid voltage (AC voltage range) (V)
|
220/230/240; 180-280 |
|
Nominal grid frequency/range (Hz)
|
50/60; +-5 |
|
Nominal AC current (A)
|
6.52 |
|
Max. AC current (A)
|
7.2 |
|
Displacement power factor
|
0.8 leading – 0.8 lagging |
|
THDi, rated power (%)
|
<3 |
|
EFFICIENCY |
|
|
MPPT efficiency (%)
|
99.9 |
|
Euro efficiency (%)
|
96 |
|
Max. efficiency (%)
|
97.1 |
|
POWER CONSUMPTION |
|
|
Standby consumption (Night) (W)
|
<1 |
|
STANDARD |
|
|
Over voltage protection
|
YES |
|
Over current protection
|
YES |
|
DC isolation impedance monitoring
|
YES |
|
Ground fault current monitoring
|
YES |
|
DC injection monitoring
|
YES |
|
RCD protection
|
YES |
|
Safety
|
IEC62109-1/-2 |
|
EMC
|
EN61000-6-1; EN61000-6-3; EN61000-3-2; EN61000-3-3 |
|
Certification
|
G98; AS4777; VDE4105; EN50549;CE10-21 |
|
ENVIRONMENT LIMIT |
|
|
Degree of protection (according to IEC60529)
|
IP65 |
|
Operating temperature range (ºC)
|
-25; +60 (derating at 45) |
|
Max. operation altitude (m)
|
<2000 |
|
Humidity (%)
|
0-100 (non-condensation) |
|
Storage temperature (ºC)
|
-25; +60 |
|
Typical noise emission (dB)
|
<25 |
|
DIMENSION AND WEIGHT |
|
|
Dimension (WxHxD) (mm)
|
267*328*116 |
|
Weight (Kg)
|
6 |
|
Cooling concept
|
Natural |
|
Topology
|
Non-isolated |
|
Communication interfaces
|
Pocket WiFi (optional) / Pocket LAN (optional) / Pocket GPRS (optional) / Meter(optional) / RS485(optional) / DRM / USB-Upgrade |
|
LCD display
|
Yes |
|
Standard warranty (years)
|
5-10 |
Solax X1 - Mini - 1.5
Specific References
Perfect single-phase grid connected photovoltaic inverter, for places with limited footprint, since the X1 - Mini – 2.0 - S reaches up to 96,5% efficiency with a very compact design and reduced dimensions. The power output can reach up to 1500W AC, being optimization by 1 MPPT. It has been designed to plug-in up to a maximum input current of 12A and a voltage of 230V, additionally it starts with low voltages from 65V. It is equipped with convection cooling, with a standby energy consumption lower than 1W. This small inverter also includes protections against over-currents, overloads, DC insulation impedance monitoring, ground fault monitoring, DC injection monitoring and RCD protection and high temperatures.