Solar Inverter Solax X1 – Mini – 1.1 – G3
In stock
That's perfect inverter the X1 Mini 1.1 achieves an efficiency of up to 96.5% with a very compact design and small dimensions. The output power can reach up to 1100W AC, with optimization by 1 MPPT. It allows up to a maximum input current of 12A and a voltage of 230V, although it starts with low voltages from 65V. It is equipped with convection cooling, with a standby consumption of less than 1W. This little guy inverter it also includes overcurrent protection, overload protection, DC isolation impedance monitoring, ground failure monitoring, DC injection monitoring and RCD and high temperature protection.
Product warranty offered ranges from 5 to 10 years, with CE certificate. The connection of this equipment with the solar panel arrays is very simple and could be installed both indoors and outdoors as it enjoys IP65 insulation.
|
Model |
X1 – 1.1 |
|
INPUT (DC) |
|
|
Max. PV array power (Wp)
|
1650 |
|
Max. DC Voltage (V) |
400 |
|
Nominal DC operating voltage (V) |
360 |
|
Max. input current (A) |
10 |
|
Max. short circuit current (A) |
12 |
|
MPPT voltage range (V) |
55-380 |
|
Start operating voltage (V) |
70 |
|
No. of MPP trackers |
1 |
|
Strings per MPP Tracker |
1 |
|
OUTPUT (AC) |
|
|
Nominal AC power (VA) |
1100
|
|
Max. AC power (VA) |
1210 |
|
Nominal grid voltage (AC voltage range) (V) |
220/230/240; 180-280 |
|
Nominal grid frequency/range (Hz) |
50/60; +-5 |
|
Nominal AC current (A) |
4.78 |
|
Max. AC current (A) |
5.3 |
|
Displacement power factor |
0.8 leading – 0.8 lagging |
|
THDi, rated power (%) |
<3 |
|
EFFICIENCY |
|
|
MPPT efficiency (%) |
99.9 |
|
Euro efficiency (%) |
95.5 |
|
Max. efficiency (%) |
97.1 |
|
POWER CONSUMPTION |
|
|
Standby consumption (Night) (W) |
<1 |
|
STANDARD |
|
|
Over voltage protection |
YES |
|
Over current protection |
YES |
|
DC isolation impedance monitoring |
YES |
|
Ground fault current monitoring |
YES |
|
DC injection monitoring |
YES |
|
RCD protection |
YES |
|
Safety |
IEC62109-1/-2 |
|
EMC |
EN61000-6-1; EN61000-6-3; EN61000-3-2; EN61000-3-3 |
|
Certification |
G98; AS4777; VDE4105; EN50549;CE10-21 |
|
ENVIRONMENT LIMIT |
|
|
Degree of protection (according to IEC60529) |
IP65 |
|
Operating temperature range (ºC) |
-25; +60 (derating at 45) |
|
Max. operation altitude (m) |
<2000 |
|
Humidity (%) |
0-100 (non-condensation) |
|
Storage temperature (ºC) |
-25; +60 |
|
Typical noise emission (dB) |
<25 |
|
DIMENSION AND WEIGHT |
|
|
Dimension (WxHxD) (mm) |
267*328*116 |
|
Weight (Kg) |
6 |
|
Cooling concept |
Natural |
|
Topology |
Non-isolated |
|
Communication interfaces |
Pocket WiFi (optional) / Pocket LAN (optional) / Pocket GPRS (optional) / Meter(optional) / RS485(optional) / DRM / USB-Upgrade |
|
LCD display |
Yes |
|
Standard warranty (years) |
5-10 |
Solax X1 - Mini - 1.1
Data sheet
- Power (kW)
- 0.5 - 0.9
- Phase Type
- Single phase
- Max Current Input (A)
- 14 - 14.99
Specific References
16 other products in the same category:
In stock
That's perfect inverter the X1 Mini 1.1 achieves an efficiency of up to 96.5% with a very compact design and small dimensions. The output power can reach up to 1100W AC, with optimization by 1 MPPT. It allows up to a maximum input current of 12A and a voltage of 230V, although it starts with low voltages from 65V. It is equipped with convection cooling, with a standby consumption of less than 1W. This little guy inverter it also includes overcurrent protection, overload protection, DC isolation impedance monitoring, ground failure monitoring, DC injection monitoring and RCD and high temperature protection.