0
No products in the cart.
SolarEdge Battery SE10kWh
SolarEdge 10000W Monofásico inverter with SetApp and EnergyNet configuration. It has an efficiency of 98% and a maximum input current of 16.5A. These inverters stand out for their efficiency, light weight and easy installation.
The inverter maximises solar energy harvesting by combining digital control technology with an efficient power conversion architecture. The fixed voltage technology ensures that the inverter is always operating at an optimal input voltage, regardless of the number of modules in a string or environmental conditions. Inverter monitoring receiver data and power optimiser performance data from each solar array can be transmitted to the web.
12-25 year warranty.
€7,371.20
21% IVA incluido
SolarEdge SE monofásico solar inverters are characterised by the following features:
- - Noise level suitable for residential environments – No external fan
- - Superior efficiency (98%)
- - Small, lightest in its class, and easy to install
- - Built-in module-level monitoring
- - Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp
- - Internet connection through Ethernet or Wireless (Wi-Fi, ZigBee Gateway, Cellular)
- - IP65 – Outdoor and indoor installation
- - Fixed voltage inverter for longer strings
- - Smart Energy Management control
Datasheet:
|
Usable Energy (100% depth of discharge)
|
9700
|
|
Continuous Output Power
|
5000 |
|
Peak Output Power in Backup (for 10 seconds)
|
7500
|
|
Peak Roundtrip Efficiency
|
>94.5
|
|
Warranty(1)
|
10
|
|
Voltage Range
|
350-450
|
|
AC Frequency (Nominal)
|
50/60 ± 5 Hz
|
|
Maximum Continuous Output Current
|
16 A
|
|
Grids Supported - Three Phase
|
3 / N / PE (WYE with Neutral)
|
|
Utility Monitoring, Islanding Protection, Configurable Power Factor, Country Configurable Thresholds
|
Yes
|
|
INPUT
|
|
|
Maximum DC Power
|
13500 W
|
|
Transformer-less, Ungrounded
|
Yes
|
|
Maximum Input Voltage
|
900 Vdc
|
|
Nominal DC Input Voltage
|
750 Vdc
|
|
Maximum Input Current
|
16.5 Adc
|
|
Reverse-Polarity Protection
|
Yes
|
|
Ground-Fault Isolation Detection
|
700 kΩ Sensitivity
|
|
Maximum Inverter Efficiency
|
98 %
|
|
European Weighted Efficiency
|
97.6%
|
|
STANDARD COMPLIANCE
|
|
|
Safety
|
IEC-62103 (EN50178), IEC-62109
|
|
Grid Connection Standards
|
VDE 0126-1-1, VDE-AR-N-4105, AS-4777, G83 / G59
|
|
Electromagnetic Compatibility (EMC)
|
SolarEdge Home Wave Inverter, StorEdge Single Phase Inverter with HD-Wave Technology
|
|
INSTALLATION SPECIFICATIONS
|
|
|
AC Output
|
Cable Gland - diameter 15-21 mm
|
|
DC Input (PV)
|
2 MC4 pairs
|
|
Dimensions (H x W x D) with StorEdge Interface
|
790 x 1179 x 250 |
|
Storage Temperature (more than 3 months)
|
-10 to +30
|
|
Weight
|
30 to +60
|
|
Storage Temperature (less than 3 months)
|
Internal Fan
|
|
Operating Temperature Range
|
-40 to +60 C
|
|
Protection Rating
|
IP65 — Outdoor and Indoor
|
SOLAREDGE10KW-AZ
Specific References
16 other products in the same category:
SolarEdge 10000W Monofásico inverter with SetApp and EnergyNet configuration. It has an efficiency of 98% and a maximum input current of 16.5A. These inverters stand out for their efficiency, light weight and easy installation.
The inverter maximises solar energy harvesting by combining digital control technology with an efficient power conversion architecture. The fixed voltage technology ensures that the inverter is always operating at an optimal input voltage, regardless of the number of modules in a string or environmental conditions. Inverter monitoring receiver data and power optimiser performance data from each solar array can be transmitted to the web.
12-25 year warranty.