Solar inverter ZCS Azzurro connected to the grid with a rated power of 5 kW. This inverter the single-phase TLM-V3 series has 2 MPPTs, unlike the TL-V3 series which has only 1 MPPT. The inverter the 5 kW TLM-V3 series delivers a maximum efficiency of 98.4%. This inverter compact solar allows typically 5500W of panel power to be connected to the DC input with a maximum voltage of 600Vdc. This series of Azzurro AL inverters like the TL-V3 series includes anti-island, RCMU and ground failure protections. In order to operate comfortably this inverter it also has a circuit breaker on the dc part.

Communication with this inverter can be done via WiFi, 4G or Ethernet optionally or with RS-485 as standard. This inverter the ZCS Azzurro solar brand provides a quick installation with a 5-year warranty.

ZCS Azzurro grid-connected solar inverter with a rated power of 3 kW. This inverter the single-phase LITE series has 1 MPPT, delivering a maximum efficiency of 97.7%. This inverter compact solar allows typically 3300W of panel power to be connected to the DC input with a maximum voltage of 500Vdc. This series of Azzurro inverters includes anti-island, RCMU and ground failure protections. In order to operate comfortably this inverter it also includes a sectioning switch on the direct current part.

Communication with this inverter can be done via WiFi, 4G or Ethernet optionally or with RS-485 as standard. This inverter the ZCS Azzurro solar brand provides a quick installation with a 5-year warranty.

In stock

Solar powered inverter Deye a three-phase hybrid grid connection that allows the charging of low voltage (48V) solar batteries either via the solar panels or from the grid. The 8kW DEYE Hybrid model, allows output powers up to 8000W AC and connects up to 10400W of photovoltaic panel power just like its monophasic counterpart. The three-phase solar inverter is compatible with the vast majority of 48V battery brands such as Pylontech, Dyness, V-TAC, Deye, and so on. .What. Its 2 MPPTs allow the optimisation of the energy produced by the solar panels. It has protection against overcurrent, overload, ground failure monitoring, DC injection monitoring and RCD and high temperature protection. This inverter it can work both connected to the network and isolated. The product is guaranteed for 10 years.

Single-phase grid-connected hybrid solar inverter that allows the charging of solar batteries either through solar panels or from the grid. The DEYE Hybrid model of 8kW, allows output powers up to 8000W AC and connect up to 10400W of photovoltaic panel power. Solar inverter compatible with the vast majority of 48V battery brands such as Pylontech, Dyness, V-TAC, Deye, and so on. .What. Its 2 MPPTs allow the optimisation of the energy produced by the solar panels. It has protection against overcurrent, overload, ground failure monitoring, DC injection monitoring and RCD and high temperature protection. This inverter it can work both connected to the network and isolated. The product is guaranteed for 10 years.

In stock

Solar powered inverter Deye a three-phase hybrid grid connection that allows the charging of low voltage (48V) solar batteries either via the solar panels or from the grid. The 6kW DEYE Hybrid model, allows output powers up to 6000W AC and connects up to 7800W of photovoltaic panel power just like its monophasic counterpart. The three-phase solar inverter is compatible with the vast majority of 48V battery brands such as Pylontech, Dyness, V-TAC, Deye, and so on. .What. Its 2 MPPTs allow the optimisation of the energy produced by the solar panels. It has protection against overcurrent, overload, ground failure monitoring, DC injection monitoring and RCD and high temperature protection. This inverter it can work both connected to the network and isolated. The product is guaranteed for 10 years.

In stock

V TAC brand lithium battery TAC of 5,12 kWh with working voltage of 48 V for wall mount. This solar battery can be discharged up to 80% (DOD) and up to a total of 6000 cycles. It has a high discharge current to provide high-density energy in a point-to-point manner (charge/discharge current of 100A) with the nominal charge/discharge current of 20A at 25oC.

The VT48100E-W solar batteries are modular and can connect up to 15 modules of the same type in parallel. This LiFePO lithium battery and its BMS are compatible with the vast majority of inverter brands like Deye, GoodWe, SMA, The Voltronic, Growatt, Victron, Solis, Growatt, etc... with CAN or RS485 communication.

The VT48100E-W batteries offer a 10-year warranty and are CE certified.

In stock

Lithium battery V TAC with a storage capacity of 10 kWh with a working voltage of 48 V. This solar battery can be discharged up to 80% (DOD) and up to a total of 5000 cycles. It has a high discharge current to be able to provide high-density energy in a punctual manner (charge/discharge current of 120A) with the nominal charge/discharge current of 100A.

The AT48-200H batteries are modular and have a wall or stand mount system which makes them easier to install and more aesthetic. This LiFePO lithium battery and its BMS are compatible with the vast majority of inverter brands like Deye, GoodWe, SMA, The Voltronic, Growatt, Victron, Solis, Growatt, etc... with CAN or RS485 communication. The AT48-200H batteries can connect up to 15 modules in parallel.

It has a 10-year warranty and an CE certificate.

In stock

Lithium battery for V TAC solar installations with a storage capacity of 7,64 kWh at a working voltage of 48 V. This solar battery can be discharged up to 80% (DOD) and up to a total of 6000 cycles. It has a high discharge current to provide high-density power on a point-to-point basis (charge/discharge current of 100A).

The VT48160 batteries are modular and feature a wall mount system which makes them easier to assemble and more aesthetic. This lithium battery and its BMS are compatible with the vast majority of inverter brands like Deye, GoodWe, SMA, The Voltronic, Growatt, Victron, Solis, Growatt, etc... with CAN or RS485 communication. Up to 15 modules can be connected in parallel.

It has a 10-year warranty and an EC certificate.

In stock

Lithium battery of brand V TAC with a capacity of 9,6 kWh with a working voltage of 48 V. This solar battery can be discharged up to 80% (DOD) and up to a total of 6000 cycles. It has a high discharge current to provide high-density power on a point-to-point basis (charge/discharge current of 100A).

The VT48200B batteries are modular and allow up to 15 modules to be connected in parallel. This lithium battery and its BMS are compatible with the vast majority of inverter brands like Deye, GoodWe, SMA, The Voltronic, Growatt, Victron, etc... with CAN/MOdbus/SNMP communication.

It has a 10-year warranty and an EC certificate.

In stock

V TAC lithium battery with a capacity of 5,12 kWh with a working voltage of 48 V. This solar battery can be discharged up to 80% (DOD) and up to a total of 6000 cycles. It has a high discharge current to provide high-density power on a point-to-point basis (charge/discharge current of 100A).

The VT48100E-P2 batteries are modular and allow up to 15 modules to be connected in parallel. This lithium battery and its BMS are compatible with the vast majority of inverter brands like Deye, GoodWe, SMA, The Voltronic, Growatt, Victron, etc... with CAN communication.

It has a 10-year warranty and an EC certificate.

The single-phase AC phase coupling battery has a capacity of 3.5kWh and can be used in ON GRID, but does not support backup.

Up to three batteries per line are possible to scale.

A module and a lid ENPHASE Cover 3T are required for 3T, for 10T three modules are required in addition to the cover ENPHASE Covered 10T.

For wireless communication, you need QRelay and Zigbee. The IQ-Gateway is also necessary if used without the Enphase microinverters.

A certificate is required ENPHASE as a battery installer. Examine the attached documents.

The single-phase AC phase coupling battery has a capacity of 3.5kWh and can be used in ON GRID, but does not support backup.

Up to three batteries per line are possible to scale.

A module and a lid ENPHASE Cover 3T are required for 3T, for 10T three modules are required in addition to the cover ENPHASE Covered 10T.

For wireless communication, you need QRelay and Zigbee. The IQ-Gateway is also necessary if used without the Enphase microinverters.

A certificate is required ENPHASE as a battery installer. Examine the attached documents.

The single-phase AC (220-230V) phase coupling battery has a capacity of 3.5kWh and can be used in ON GRID, but does not support backup.

Up to three batteries per line are possible to scale.

A module and a lid ENPHASE Cover 3T are required for 3T, for 10T three modules are required in addition to the cover ENPHASE Covered 10T.

For wireless communication, you need QRelay and Zigbee. The IQ-Gateway is also necessary if used without the Enphase microinverters.

A certificate is required ENPHASE as a battery installer.

15 years warranty

Additional bag of accessories for Powerwall 2. It includes a set of AC cables, WAGO lever nuts, a 4-pole black screw connector, a 4-pin green terminal block connector with 120 ohm termination resistance and a perforated threaded stoppress. Cover cable compartment with four screws.

Tesla Powerwall is an AC (220V) battery system with the most advanced technology on the market that is an essential complement for residential facilities or small businesses. This battery stores energy for solar self-consumption, programmable control and full backup.

Tesla\'s advanced Powerwall interface allows for easy and fast connection. It achieves market-leading energy density thanks to its innovative and compact design, allowing it to quickly benefit from the advantages of clean and reliable energy storage.

It is ideal for any system thanks to its compatibility with any inverter and its storage capacity of 14 kWh.

The installation requires the installation of a Tesla Gateway unit. It allows installation of up to ten batteries.

Accessory kit Accessory bag for Powerwall 2 to be added separately

The solar inverters SAJ H2 energy storage is used in residential photovoltaic energy storage systems, with peak cutting and valley filling functions to maximize the use of photovoltaic power generation.

The inverter three-phase solar SAJ H2 10 kW has 2 MPPTs with a maximum current of 15A each. The inverter SAJ 10kW H2 supports up to a maximum of 10kWp of solar panel power.

This inverter it allows savings on residential electricity bills in three-phase installations with incorporated solar batteries. In addition, different working modes can be configured according to different customer needs. Also these inverters can provide uninterrupted power for important charging devices with a backup power supply.

H2-6k-T2 three-phase solar energy storage inverters are used in residential PV energy storage systems, with peak cutting and valley filling functions to maximize the use of PV power generation. It has 2 MPPTs with a maximum current of 15A. I was able to connect up to 9kW of power from panels.

This achieves the objective of saving on residential electricity bills. In addition, different working modes can be configured according to different consumption needs. The investors SAJ 6 kW H2 can provide uninterrupted power for major charging devices with a backup power supply.

For those looking for reliable and efficient energy storage in their homes, the solaredge home battery 48V, 4.6kWh BAT-05K48 is the ideal choice. This battery has a capacity of 4.6 kilowatts per hour and a voltage of 48V. It aims to maximise the capture and use of solar energy by providing consistent and optimised energy.

BAT-05K48 is characterised by its advanced technology, which ensures superior performance and long service life. It\'s designed to work perfectly with Solaredge systems. This battery is the right choice if you want to reduce your dependence on the power grid or simply have a backup source during outages.

Compatible with three-phase inverters. Capacity of 4,6 kWh

Up to 5 modules in parallel per inverter. What. Floor and wall mounting

The lithium battery LG The Resu 16H Prime is the first model of the new generation of LG.

Designed to be compatible with a greater number of self-consumption inverters SMA, SolarEdge, Sungrow, GoodWe and Solis with 9.6kWh useful, making the battery suitable for photovoltaic installations that require an accumulation of surplus production.

It supports the connection of another battery in parallel to increase autonomy and output power, which remains at 7kW. It has a 10-year warranty period.

The lithium battery LG Resu 10H Prime is the first model in the new generation of LG.

Designed to be compatible with a greater number of self-consumption inverters SMA, SolarEdge, Sungrow, GoodWe and Solis with 9.6kWh useful, making the battery suitable for photovoltaic installations that require an accumulation of surplus production.

It supports the connection of another battery in parallel to increase autonomy and output power, which remains at 5kW. It has a 10-year warranty period.

SolarEdge BackUp Interface BI-NEUNU3P-01.

Allows complete or partial backup of the home when the grid is interrupted. Integrates seamlessly with the SolarEdge Home Hub inverter. This allows you to manage and control both PV generation and storage during grid outages, as well as direct solar power to home loads.

The 10kWh lithium battery of SolarEdge Energy Bank at 48V improves system performance by adding more energy to store and use to connect to the grid and support energy applications. The battery of SolarEdge it\'s great for homes. The inverter can be connected to up to three power banks SolarEdge to increase power, savings and independence.

It can be connected to a growing line of smart accessories, such as smart hot water controllers and smart relays and switches.

The Energy Bank Battery SolarEdge it has a global system efficiency of 94.5% and connects directly to our innovative inverter single-phase with HD-Wave technology, ensures that power is available when needed.

The Lynx Home U series of GoodWe is a low-voltage lithium battery designed for residential applications. Its small design, its safe battery technology (LFP) and its user experience are outstanding features. Thanks to the integrated self-recognition function and Plug & Play communication with investors GoodWe, are very easy to install.

The battery GoodWe The 5.4kWh 48V Lynx Home U (LV) uses the safest LiFePO4 lithium technology available on the market.

It\'s got a smart BMS built in. Up to 6 batteries can be connected in parallel (32.4 kWh). Applicable to investors GoodWe ES, ME and SBP.

Protection class IP65 of the battery GoodWe Lynx Home U is suitable for both indoor and outdoor use.

It is possible to connect up to six units simultaneously to a single inverter. What. The usable storage capacity can be increased to 28,8 kWh.

A single-phase hybrid inverter GoodWe THIS IS GW6000-ES-20. It has a maximum output of 6000 VA in AC and has a backup function.

Guarantee extended free of charge to 10 years for installers GoodWe Plus and plus. The inverter the ES G2 hybrid provides optimized energy flexibility and meets the needs of combined PV roof and energy storage systems. By enabling maximum back-up of the generated solar energy, a high degree of autonomy can be achieved.

The ES G2 is an excellent choice for residential applications thanks to its modern design and ability to integrate with Smart Home systems. A variety of batteries, such as batteries GoodWe Lynx Home U or 48V lithium batteries of Pylontech, are compatible with the ES G2 series.

Solar inverter hybrid single phase GoodWe THIS IS GW3600-ES-20. It has a maximum output of 3680 VA in AC and backup function.

Guarantee extended free of charge to 10 years for installers with GoodWe Plus and plus. The inverter solar hybrid ES G2 provides optimized energy flexibility and meets the needs of combined PV roof systems. Energy storage facilitates a maximum backup of the generated solar energy thus achieving a high degree of autonomy.

The inverter solar ES G2 is an excellent choice for residential applications thanks to its modern design and ability to integrate with Smart Home systems. A variety of batteries, such as batteries GoodWe Lynx Home U or 48V lithium batteries of Pylontech, are compatible with the ES G2 series.

Single phase solar inverter of the brand SolarEdge 5kWac supporting the BackUp function via SolarEdge The home interface is BI-EU1P. This inverter of the SEXXXXH series can support up to 200% of the rated AC power at power in the continuous part (12000Wdc) to maximise the AC output.

The BackUp system allows the solar installation to continue feeding the loads in case the grid stops working giving the nominal power of the inverter. The 6.0kW Home Hub inverter allows modular connection of several 400V solar batteries SolarEdge Home (up to 3 batteries).

This inverter has a single MPPT, arc detection system and offers a 12-year warranty with the possibility of extending it to 25 years

Single phase solar inverter of the brand SolarEdge 8kWac supporting the BackUp function via SolarEdge The home interface is BI-EU1P. This inverter of the SEXXXXH series can support up to 200% of the rated AC power at power in the continuous part (16000Wdc) to maximise the AC output.

The BackUp system allows the solar installation to continue feeding the loads in case the grid stops working giving the nominal power of the inverter. The 8.0kW Home Hub inverter allows modular connection of several 400V solar batteries SolarEdge Home (up to 3 batteries).

This inverter has a single MPPT, arc detection system and offers a 12-year warranty with the possibility of extending it to 25 years

Single phase solar inverter of the brand SolarEdge 6kWac supporting the BackUp function via SolarEdge The home interface is BI-EU1P. This inverter of the SEXXXXH series can support up to 200% of the rated AC power at power in the continuous part (12000Wdc) to maximise the AC output.

The BackUp system allows the solar installation to continue feeding the loads in case the grid stops working giving the nominal power of the inverter. The 6.0kW Home Hub inverter allows modular connection of several 400V solar batteries SolarEdge Home (up to 3 batteries).

This inverter has a single MPPT, arc detection system and offers a 12-year warranty with the possibility of extending it to 25 years

In stock

The low voltage (48V) lithium solar battery Dyness DL5.0C with a storage capacity of 5,12 kWh. Solar battery based on LiFePO4 ions (lithium and iron phosphate). With very high performance, high safety and long life (more than 6000 cycles), it has a very compact design, high usable power output and modular design. Each DL5.0C solar battery module has an independent BMS to control battery charging/discharging with the inverter.

Lithium solar battery 48V compatible with most solar inverters (Goodwe ES/EM, SMA, Victron Energy, Solis, SAJ, Voltronic power, Luxpower, Sofar The solar, Growatt, GMDE) hybrids or isolate which has a 10-year warranty. Includes cables to connect to another battery and also to connect the inverter.

Save your unit for June

Solar charger inverter for isolated installations from 6000W to 48V single-phase with Wifi connection to be able to connect solar battery bank (of any technology) of the corresponding voltage (48V). The Axpert VM III 6K has a single MPPT (maximum power monitoring point) and provides a performance of 93.0%. The maximum input current of the solar regulator is 120A, minimum starting voltage of inverter solar is 120Vdc and maximum power of solar panels is 6000W.

This inverter the 6kW (kVA) Axpert VM III solar charger offers a 2-year product warranty and CE certification.